Rinse is one of the most important functions of washing machines. Do not be her, we would have to personally put heavy, wet underwear in the bathroom, and then also squeeze it. That is why the emergence of automatic styrors performing the whole cycle of washing, up to drying, it became a real salvation for the hosts, since he took a large proportion of homework from their shoulders.
However, the washing machine is still a technique that has a property fail. If the device refuses to perform its work, it means that a breakdown occurred, which is required to immediately eliminate, otherwise you will have to do it yourself.
About why the washing machine stops ringed underwear, and how to solve this problem, read below.
The reasons
If the washing machine suddenly "hangs" closer to the end of the wash - the drum ceases to rotate, while the water remains inside, and the washing program does not end, most likely, the problem is related to the rinsing mode. There may be two main reasons for any. We will tell you more about each case.
Not rinsing and does not press
If when you start the drain or spin mode, the water remains in the drum, the problem is most likely not in the control unit, but in the drain system. This is not the worst version of the development of events, as it is much easier to clean the resulting blockage than to fix the electronic module.
First of all, it is necessary to check the hose, pump, filter and all other parts through which water drops. We check them for damage, blockages or foreign items.
If all these elements are in order, we recommend that you also test the water level sensor. In the event of a malfunction, it can signal that the tank is empty, whereas in fact there is water. For this reason, the rinsing mode does not start.
Article on the topic: How to restore furniture: polished, veneered, wooden
Not rinsing but presses
If the drain and spin modes work properly, but the laundry laundry does not want to laugh, you should look for a reason directly in the aggregate itself. Most often, this problem is connected with a breakdown of the control module or heating element.
In the first case, without possessing special knowledge in the field of electronics, you can do anything hardly. It is more expedient to give the machine to repair so that the block is overwheed or replaced with a new one. If the case is in the malfunction of the Tan, it is necessary to carry out its diagnosis. This can be done independently, read more in the article "How to check the TEN washing machine?" Or see the video below.
Prevention
In order for the laundry after washing, the underwear was always perfectly clean and fresh, without divorce from the powder and air conditioner, you need to constantly monitor the system of rinsing and plum worked properly.
- Use only high-quality tools for washing, which quickly dissolve in water and are easily washed away. If you notice that after washing, the powder began to stay on things or in the tray, try changing the tool.
- Always exactly follow the instructions for using the machine: Do not overload the drum and choose the appropriate wash programs for things.
