The wardrobe coupe is an indispensable and practical component of the interior and enters the basic set of furnishing of any residential space. Proposals for the choice of ready-made cabinets from furniture manufacturers is quite wide, as well as services for assembling cabinets for personal projects. However, when there are free time and some skills in designing, the assembly of the cabinet coupe does not make it difficult for a homemade craftsman.
Elements of typical cabinet coupe.
Before collecting, you need to prepare the Cup Draft Coupe in accordance with all the sizes and know where it will stand. The design of the cabinet of the coupe must be performed thoroughly, given the mass of subtleties. From the completeness of the reflection of all personal preferences in the plan depends on how convenient and attractive will get the wardrobe in the end. Note the main points of design.
We begin the design of the cabinet: the choice of a suitable place
Most importantly - the presence of sufficient space near the cabinet, in order to be able to open the doors without constraint, push the boxes and remove the contents of them from the shelves.
It is important to consider the location of other furniture relative to the wardrobe, so that between it and the cabinet there is no mutual inconsistency from either the convenience of use or by the appearance.
The size of the cabinets of the coupe is often sufficient and highest, and in other parameters. Therefore, in the pass to put such a wardrobe and it is not recommended to shove the room, because it will visually make the space less. The best option is the location of such a cabinet - close to the wall. With this installation of the cabinet, the illusion of the continuity of the outlines of the space and the harmony of the geometry of the room will appear.
Drawing of the cabinet coupe.
After the decision was made on the location of the future interior item, you can move to the question of how it is better to build it: a separate product or built-in. A feature of the built-in closet is that the product will fully fill the space between the floor, the ceiling and walls without intervals and gaps, will create a holistic image of the room layout. However, during the unevenness of the floor and the ceiling, it is better to leave the idea of the built-in cabinet, as it is precisely to the ceiling and the flooring the guides of the doors.
Article on the topic: How to wash plastic windows and window sills at home
The built-in product is not suitable and when the ceiling consists of not very strong material, for example, GLC. Doubt that the ceiling will not be able to withstand the severity of the cabinet doors, should not be.
A separate cabinet will be appropriate when the embedding option is not suitable. The difference between the separate product from the built-in - in the presence of a gap under the ceiling. The cabinet, standing separately, is good because it can be reinstalled in a different place or move on transport to another apartment. The unevenness of the floor and the ceiling on it do not affect it.
Execution of measurements
After the choice of the type of the wardrobe is made, make measurements of the space, drawn under the closet, width, height and depth. Designing a cabinet for embedding involves the limit accuracy of the measurements performed. You can even invite the measurer from the organization engaged in the manufacture of wardrobes. The design of the cabinet as a separate product provides for the presence of spaces, at least minimal.
Measuring the width, it is important to take into account the presence of plinths on the floor; When measuring the height - the degree of flatness of the floor and the ceiling. The height measurement is carried out at several points to determine the minimum and subtract 5 cm from it on the allowance. The depth of the cabinet is permissible to do any, but at least 60 cm, if the cabinet is planned to place her shoulders for clothing.
Stages of assembling cabinet coupe.
When the size of the cabinet is determined, go to the most pleasant procedure - designing boxes and shelves. Their calculation leads based on personal wishes. It is important to consider which things except clothes will be stored in a new cabinet (for example, heater, vacuum cleaner); How many and what clothes are preferably hanging on the shoulders, and what to hide in the boxes. Answers to these questions will form the basis for the design of the sizes of the shelves, the length of the rod, the number of baskets and retractable boxes.
Article on the topic: Polypropylene ropes: features and scope of application
Less than 30 cm is not worth making the height of the shelves, otherwise they will use very uncomfortable. Taking into account the fact that baskets and boxes are more preferable from the point of view of space saving, since they can be filled with the toes to the top, desired, the space of the shelves is filled only by 60 or 70%.
The space for the shoulders with clothing can be divided into two components: for items longer and short clothes. In addition, the wardrobe can be equipped with a shelf for high objects (for example, tubes for drawings, umbrellas-cesters). Designing drawers with baskets, it is important to think how easy and convenient for them can be retractable.
At the very end, you need to make the final edits into the Cup project project, while looking at him even time and making missing inscriptions. You need to think if I wanted to see in the finished product, I was embodied in his project.
The most important thing from the wardrobe - doors
The cabinet project will not be complete without the design of the door-coupe. They can be planned any quantity that will depend on the width of the coupe and personal wishes.
The door coupe is placed on a guide in two rows. They need to be placed in the project and see what magnitude and in what direction each of them will open which space inside will be available if the door is revealed as much as possible. The main thing is that it does not work out that one area of the shelves turned out to be inaccessible at any opening of the door.
About decorating doors should be said separately. Due to the wide list of materials offered by manufacturers, it is possible to create an exclusive and several bold design not only the wardrobe, but also the entire room. To decorate doors today, you can buy a rattan, a mirror, bamboo, glass, stained glass windows.
After completing the work on the project, the wardrobe should be thought out its coloring and texture of the material for the base. Do not forget that the dark shades visually narrow the space and make a gloomy room even less cozy. Light color expands the atmosphere around. The use of mirrors, mirror inserts on the doors will create an illusion of visual expansion of space.
Article on the topic: Cot for a newborn with his own hands: Where to start?
Knowing how to design a wardrobe with your own hands, you can save on the purchase by putting the minimum of funds for materials and accessories.