A good rest after a hard working day is needed to every person to recover physically and morally and be prepared for new beginnings and achievements. A person spends a third of his life in a dream, so it is extremely important that staying in this state was as cozy as possible. To ensure peace and silence, people arrange the bedrooms in a quiet side of the house, acquire luxurious and comfortable beds, for the placement of furniture use the traditions of Eastern teaching and culture Fengshui, prefer orthopedic mattresses and pillows, soft to the touch fabric, both for bed linen and For floor rug and blanket.
Citizens are particularly sophisticated in the tastes of citizens with their own hands.
And the citizens are particularly sophisticated in tastes as a means to improve the atmosphere can organize a bathtone for the bed with their own hands. It is a canopy of any material hanging on top above the sleeping person.
Historical data
Photo 4. To make a classic style canopy, you need to make a rectangular frame and sew curtains in an amount of 8 pieces.
In order to build a classic Bedalchin for the bed with your own hands, you need to buy a fabric that will go to tailoring curtains. For them, you will need a pair of 2-meter silk sections or tulle. Of these, 2 curtains are sewn, which should be fixed on the cornice rings (photo No. 2).
A complete list of materials and tools is as follows:
- Wooden beam with dimensions 2 × 2, 22 cm high, in the amount of 4 pieces;
- 2 eaves, whose length is equal to the width of the bed, and another 2 karnis, equal to the length of the bed;
- fasteners - bolts;
- electric drill;
- roulette;
- building level;
- cloth for curtains or curtains;
- decorative tape in order to support curtains;
- Sewing tools - chalk, scissors, threads, needles, sewing machine.
Article on the topic: How to make a reliable and correct rafter system with your own hands?
The framework under the classic canopy should be made of smooth or decorated bars installed in the corners of the bed strictly perpendicular to it. Previously, this sawn timber should be covered with an antiseptic that will make the design more durable and durable. Mounting bars will need to frame the bed with bolts. From above, these racks are covered with eaves, which, if desired, can be replaced with thin horizontal beams, in which case will have to buy the rings to which the fabric will be fastened. It will be necessary to cover this design to be suitable paint, and then at the request of the owners and varnish.
Photo 5. Nowadays, many designers recommend leaving the curtains with fascinated.
After creating a rectangular frame, you can start sewing curtains in an amount of 8 pieces, since it will be necessary to hang 2 curtains for each side (photo No. 4). The size of the fabric via width should be equal to the distance between the floor and eaves, add 2-3 cm, thanks to which you can make a bending.
Curtains may not reach the floor, but only to close the mattress, dropping below it by 15-20 cm. After cutting the curtains, they will need to be adjusted from all sides, flashes on a sewing machine, then on the top edge, the taper with loops will be for which the curtains will be hollow on the rings of the cornice.
We collect hired curtains near the supports, raising them on 1/3 and tie the decorative ribbons fixed on the racks. Some prefer not to pull the curtains, leaving them with a leaning (photo number 5), which makes a sleeping place easier and air, especially if it is decorated in gentle pastel colors (photo No. 3).
How to make a dome type floor?
Photo 6. The basis for the ring-shaped canopy is a metal circle with a diameter of 50 cm.
The manufacture of a luxurious dome canopy having an annular shape involves the presence of the following materials and tools:
- Metal circle;
- 4 chains 40-50 cm long;
- hook for fastening;
- screwdriver or screwdriver;
- wire;
- hacksaw;
- electric welding;
- electric drill;
- Corn rings.
Article on the topic: Production of a table from boards with their own hands
Ring-shaped canopy is an example of the most bright and affecting the imagination of the work of designer art (photo No. 6). The basis for it will serve a small metal circle with a diameter of 50 cm. In one place, this circle will have to cut up to ride the cornice rings. This ring can then be again connected to a closed design using welding. According to the four opposite parties of the circle, drill holes through which 40 or 50 cm chains, connecting them together, hang onto the hook, attached to the ceiling in advance to the ceiling above the center bed.
The production of curtains is carried out with the help of tools and technologies presented in the above classic version. However, for the dome to choose better transparent fabrics, such as nylon, organza or veil. To create a curtain, you will need 2 or more pieces of matter, the length of which should be at least 2 m, and the width is calculated on the basis of how many curtains are planned to hang on the ring. Since the fabric will not be attached to 4 racks, located with each of the sides of the bed, and the curtains will freely hang out with light folds and waves and straighten up the perimeter of the bed, it is not worth saving on the size of the tissue, since the cropped pieces will not look very elegant. In the process of creating this type of canopy, some designers do not advise supplying a metal circle of cornice rings, since the long sections of the fabric can simply be transferred through the circle and tie with beautiful nodes. A semicircular canopy is suitable for small rooms.