The interroom threshold is part of the door frame, it is intended to hide the joint between different sex coatings, as well as various irregularities of sexual coating.
Another a lot of important feature of interroom thresholds is to give the interior in your home of a certain image.
This element is usually installed next to the main door in the housing and between any rooms.
Not rarely not that people set special anti-slip products on the stairs.
In this article we will look at the technology of self-installation of the interior thresholds.
Technology laying interroom thresholds with your own hands
Thresholds play the role of a certain element in the interior of housing, which is experiencing strong loads and mechanical pressure, as this part is above the surface of the flooring.
In this regard, before installing interroom thresholds, it is necessary to make a very responsible approach to their choice.
A large, heavy wooden door usually has noise-absorption properties, the threshold is also capable of performing such a function.
However, the installation of interroom doors has a large number of differences from mounting thresholds. Thus, to get the maximum effect, you should make a choice in favor of the box, which has rubber seals.
In case of insignificant flooding in the bathroom, the threshold will act as an obstacle, so that water does not penetrate into another room. However, if the flood is too big, then naturally the threshold cannot affect water transfusion.
- Note that the thresholds from the stone will ensure the reliability of the device and, therefore, after the Flood, your threshold will continue for a long time. In order for in your bathroom there is no high humidity, you should choose a box without sealing elements.
- In the case of the installation of the interroom in the kitchen, it will provide you with protection from the spread of smoke and Gary for your apartment.
- As for the shortcomings, the usual standard thresholds usually protrude relative to the surface of the sexual coating and thereby become the cause of the fall. It does not rarely relate to small children who are stored about them.
Article on the topic: Window frame with their own hands: Designs
How to remove old interroom thresholds
First of all, before we take for work on the installation of interroom thresholds, you need to disassemble old. In order to dismantle the old threshold you need a hacksaw, hammer and lomick.
First, we spill the edge of the threshold, and then knock it out its middle part. The process of removing old thresholds should be performed with great accuracy, as it is possible to damage the door cloth.
The remaining parts of the threshold are removed by the Lomik, if necessary, the lomick should be drove deeper. In order to place a lombing, more deeply under the remaining parts of the threshold can be used by the hammer.
Today, there are several methods for mounting these interroom elements. Fasteners must begin with correct definition of the joint, which must be closed.
Then the finished size is noted on the threshold and with the help of the knife remove excess material.
Installation of open-mount thresholds is not a challenge. For installation, profiles are used that have finished holes made with the same step.
Mounting interior threshold with your own hands
We turn directly to the mounting of the threshold, for this we will make it to the floor surface and make places where screws or other fasteners will be.
It is very important to pay attention to the fact that the holes are not too big, as screws in the future can break out and falling.
Also draw attention to the fact that if you desire as a result of your work not to be disappointed, then the DIN matching table with GOST and ISO can be very useful to you. You will find high-quality hardware and fasteners in the company Mashkpezh.
In the case of an extensive gap between the parts of the flooring, it must be closed with a suitable threshold. Screws that have decorative hats should not look markedly on the threshold background.
Article on the topic: Installing arches in doorways: Recommendations (video)
If you are not indifferent to the aesthetic elements of the interior, it is best to stay on interior thresholds with hidden fasteners. Such types of interroom thresholds include planks that have certain holes intended for ships of screws.
To mount the bar, you should make holes in the floor, then a dowel should be installed in the opening data. Self-tapping screws need to be very gently put on the holes in the bar, then turn it down with screws down and also gently insert in a dowel.
If necessary, it is possible to press a little on the bar, after which it should be fixed with a hammer that should be knitting without giving a special effort by putting a paper layer on the bar.
At the end of our article, we note that the thresholds also protect the floors in the house from the accumulation of dirt and prevent the formation of moisture in the joints between the coatings.