Resting every morning bedding in numerous chests along the walls of the bedroom, many think about how to be spacious in the room without these lockers who carry exclusively warehouse functions and only interfere with the passage. In addition, these are the main dust collectors, which is so clearly visible on their polished surface.
Box diagram for linen.
And the decision of the issue is near, it is worth only to pay attention to the space that the bed takes. The homemade craftsmen just need to learn how to make a bed box and hide the whole bed into it.
Thus, the bed will carry the additional storage feature of those supplies that are also intended for it. Now with the chests you can specifically, at least in the bedroom, and free the space in the most intimate part of the apartment.
Design options
Drawer diagram under bed.
After making the decision to use space under the bed for the device there are drawers with bedding, it is necessary to solve the issue of their design. Boxes can be retractable, with rollers fortified at the bottom. Such a design is easy to execute and does not require a serious alteration of the bed itself.
But there is one minus - the need to create a free space near the bed to leave the boxes, and it is not always possible to do without performing revolutionary permutations throughout the bedroom.
There is a design option when accessing the free space under the bed can be obtained by raising the base of the bed on the special brackets on which the mattress lies.
But the complication occurs again - each time the bed must be removed covered, then the mattress, and sometimes someone from the family members. Although modern mattresses are not heavy, but this is an obvious inconvenience.
Article on the topic: Clapping the base of the house with their own hands
In addition, the daily raising of the foundation can lead to a rapid wear of the skeleton of the bed. Beds themselves belong to static furniture and are not intended for frequent movement. Fastening brackets for the lifting mechanism will also require the strengthening of the entire design of the bedroom bed.
Most furniture makers are explicitly preferred by the option when the boxes are extended. This design practically does not affect the bed itself and requires minimal frame alteration. In the manufacture of beds with traveling panels do not cause difficulties and do not require the use of complex mechanisms, such as microlifts, for smooth lifting and lowering the bed bed.
Choosing materials and components
Drawer diagram for bed with sections for linen.
Boxes can be constructively in the already existing bed, if it allows the height between the floor and the frame, but it is possible to build a new bed with organically inscribed retractable panels and even cabinets. The second option in the cost of effort and material means is superior to the first, but even more significant and exceeds the resulting effect.
For the manufacture of the bedroom, it is first necessary to make an outline - drawing of the future design, and on its foundation to start selection of materials, accessories, fasteners and finishes.
The manufacture of large-sized furniture at home is always associated with serious problems in terms of surface treatment of design details that have large dimensions.
For the production of furniture in workshops, special machines are used, which allow you to process the source material with professional quality and trim. Some operations are hard to implement in the apartment, for example, the edges of the ends or grinding of figure cuts.
As a way out, many homemade masters produce their own material, make the necessary drawings and give to the furniture workshops, where all the details of the bed box are manufactured, and the house is already being built and fit on the place.
Immediately the box itself can be made under the bed and at home, as it does not differ in large sizes and does not require special knowledge.
Example 2. Drawing of a double bed with drawers.
Article on the topic: Curtains on the gate in the garage: it is necessary
But here there is a question with facades. They are also better to order, especially if the choice fell on the front parts, manufactured using MDF technology.
List of materials that need to be purchased for the manufacture of a box for bed and drawers:
- Chipboard for frame frame and boxes;
- DVP for bottoms of boxes;
- plywood;
- bars for the base;
- Reiki;
- Furniture screed for collecting frame;
- rollers for boxes;
- confirmates;
- self-tapping screw;
- Furniture cloves.
From tools for assembling furniture may be needed:
- rechargeable screwdriver with a set of bit;
- Drill with crowns under furniture ties;
- wood hacksaw;
- clamps;
- Screwdriver Set;
- Roulette, kitchen and pencil.
Design features
Example 2. Drawing of a double bed with drawers.
Thanks to the Internet, it is possible to familiarize yourself with many different design options for both single and double beds. But basically, they have the same base, for a bed designed for two people, it will be 1600 x 2000 mm.
By the way, all sizes in furniture manufacturing are given in millimeters, therefore, preparing drawings for the furniture workshop, it is necessary to avoid specifying size in centimeters, since the master may incorrect you to understand you.
To enhance the stiffness of the bed itself as the bottom of the box, it is better to use Paneur, and in Fiberboard boxes, since it is easier, and the boxes have a different load.
Boxes can be moved both from both sides of the bed and one large from the end. It all depends on the planning of the bedroom and the availability of free space.
There are two types of drawers designs. If small boxes are not supposed to give them a large load, they can be attached to the guides, and they will be retractable, both in bedside tables or chest. Boxes in which bed things will be folded, it is better to do on floor rollers. So, they will not overload the frame of the bed, and they will be easier to move.
Article on the topic: The ceiling of boards do it yourself: arrangement
The facades of the boxes can be ordered from MDF or make from the same chipboard as the base of the bed so that they do not stand out strongly in the overall furniture design.