Rolled curtains on plastic windows are one of the most practical options for window design, characterized by a simple principle of action and an easy installation. But some nuances still exist and with them it is better to meet in advance.
Rolled curtains
How to install rolled curtains: a sequence of actions
The main feature is to attach the rolled curtains in the immediate vicinity of the glass in such a way that the tissue canvas becomes one whole with the window. To attach curtains to plastic windows, perform a specific sequence of actions.
The assembly of rolled curtains is carried out in the following order:
- Choose the fastening type. There are three options: fastening to the wall of the window opening, to the windows frame or to the ceiling. Consider the option with the window frame.
- Check the surfaces on the presence of obstacles in the form of protruding parts, which will make it difficult to rise and lower the canvas. When the mechanical roller shutters on the windows cling to the handle, they are installed, providing for the deployment of the roll in the back of the clockwise side.
- Measure the width of the rolled curtain together with the brackets, adding to the obtained size of 5 mm on each side (this clearance facilitates the mounting of the brackets).
- Roller shutter control circuit helps to determine the location of the control chain. The configuration determines the manufacturer. As a rule, the control mechanism is located on the side of the bracket having a hexagon ledge, or on one side with a shaft made with a recess in the form of a hexagon.
- Next, the installation of horizontal blinds on plastic windows is to install brackets. First, the place of attachment of one element is scheduled, then with a drill with a diameter of no more than 2.5 mm drill a hole in the window frame. After mounting the first bracket, slightly tighten the screws, exhibit the horizontal of the shaft and the mount is placed under the second element.
- Further, the scheme of installation of roller shutters implies trimming on the appropriate length of the shaft of the roll model. To properly determine the size of the frame width, the thickness of both brackets (about 3 mm) is subtracted. Then insert the tube-equipped with a protrusion and the resulting size is cut off the lower ray.
- To properly mount blinds on plastic windows, the canvas should also be cropped in width. For this, it is laid out on a flat surface, placed at the prepared lower rail and cut off with sharp scissors or a construction knife.
- At the final stage, the roller shutter assembly scheme consists of attachment of the cropped cloth on the shaft. To do this, a protective film is removed from the self-adhesive shaft strip, check the location of the control mechanism. From the upper side, the fabric is raised by 5 mm, forming a fold in which the shaft is tracked (the self-adhesive strip should look up). Then it is tightly fixing the cloth on the shaft, withsting the horizontal. The scope is folded by three quarters of the length and in the hole available in the canvas insert the rail.
- The assembly and installation of the blinds are completed inserting the end of the curtains with the control mechanism into the bracket and fixation in another bracket of the second side.
Article on the topic: Monochrome cross-stitch Schema new: the most interesting for free, download without registration, couple and baby
Installation
Rolled Models "Day-Night"
Installing the Roll Curtains "Day Night" is carried out, following the instructions described above, but the canvas itself has some features. Such a curtain has a second name - Zebra. As materials, synthetic tissues with dust-repellent and antistatic properties are usually chosen as materials. The peculiarity is to alternate transparent and opaque fabric strips, fastened with each other by means of seamless technology.
Double blinds on plastic windows are located on both sides of the shaft, so in the process of movement by regulating the course of both cloths they are exhibited, coinciding or overlapping each other. Thus, the illumination is effectively regulated.
Curtains MIX.
Such rolled curtains provide darkening of the window from the bottom, without closing the entire upper part. As a result, the room is protected from prying views and open to sunlight. The models are usually equipped with limiters and fishing line, so the installation of the curtain is performed in the following order:
- The fishing line is cut in half, after which the two of its edges are inserted into the upper limiter, after which they are tied on a double knot;
- On the window of the window the limiters are attached;
- Through the curtains available in the box, the free edges of the halves of the fishing line are loaded;
- The plank is attached at the top of the window opening, the fishing line stretched into the lower limiters;
- Fix the box at the bottom and unwind the canvas, pressing the locks on the bar.
Use cassettes
We are talking about CLASSIC curtains, in which the shaft with the web is embedded in the box. On the window, the model is tightly fixed by guides.
Classic.
The installation diagram of the rolled curtains of this type, as in all other versions, begins with the measurements of the height (rounded results cannot be in any case). The correct installation of rollstovers is possible in the presence of an adequate size, which is measured between the outer edge of the upper staple and the inner edge of the lower. It is recommended to narrow the dimensions only if the strokes have a width of more than 2 cm. And one more important nuance: it is possible to install such a system only with the depth of planting glass at least 7mm.
Article on the topic: Pillows instead of back
Thanks to the sale of the curtains, practically assembled, its installation is extremely simple:
- Installation begins with degreasing the strokes;
- The guide released from protective tape is glued to the stroke, coinciding with its outer edge. The second edge hangs freely over the window;
- After gluing both guides, pass the entire surface with hands, carrying out attachments;
- Then the curtain itself is installed on plastic windows (fasteners are carried out according to the instruction described);
- After fixing the curtains, the closure of the side caps unwind the cloth and fixes on the control chain of the stopper. In order to avoid hitting the lower plank under the design of the box, the installation of the second stopper is performed, a slightly operating a chart;
- A grudging loader is fixed on the chain, the chain lock on the window frame is installed.
Curtains on sash
Such blinds in the form of mini models are placed directly inside the window on the opening part of the frame. If plastic windows are selected with blinds inside, the installation is carried out in the methods described above, choosing one of the following mounting options: on the attachment brackets or with drilling. The difference is to use as a fixing web at thenime elements of magnets and magnetic stripes. Magnets are fixed on the bottom plank from its back side, and the magnetic strip passes on the window (more precisely, on the frame) with the lower plate lowered.
After installing any type of roll models, they must check their performance, alternately dropping and lifting the canvas, assessing the free move and the absence of contact with the surrounding objects.
Rolled Blinds of Pool Production
With the right choice of material, such models are not inferior in appearance expensive shopping options.
Rolled blinds do it yourself
Homemade blinds on plastic windows can be made from any dense material using a tape of a contrast or similar material of color as a minor web.
Curtains can be attached to the frame by screws. There is another option - rolled curtains on scotch.
Article on the topic: Methodology and means than washing Wallpaper
Works are performed as follows:
- Measure the window by adding 10 cm to the resulting value;
- The material contains the material, making the channel from two halves;
- Stitching the curtains, making a line at a distance of 2 cm from the edge;
- Wooden shelters are inserted into the upper and lower parts;
- Fixed at the top of the web symmetrically relative to the center of two tapes;
- Fasten the finished product to the frame.
View video design
Installation of the blinds of any type does not represent difficulties, if the preparatory work is performed correctly, the instructions for installing rolled models and is selected suitable for a specific window system. Tightly adjacent fabric cloth protects reliably from strangers, bright sun, additionally decorating the interior if the model is selected with a pattern. If you wish, you can add the rolled curtain of the usual mild curtain, which will make the situation not only practical, but also elegant.