Photo
The staircase finishes can be carried out by virtually any material that is used for floor coatings. However, one of the most correct and beautiful solutions is to use laminate. Nowadays, there are many varieties of this coverage. It is used everywhere. This is not strange, because laminate is a practical and beautiful material. Its use is able to make new bright colors in the house.
Finish ladder laminate.
Today you can easily separate the laminate laminate with your own hands. Moreover, it will be necessary for the minimum of effort and time. The most important thing is to follow the instructions.
Getting started working proceedings
Scheme of proper laying of laminate.
Finishing the ladder laminate is a very responsible task. Perhaps it can be compared with the floor finish. All steps in the house are constantly exposed to various mechanical efforts. The purpose of the coating by their laminate consists not only in decorating the surface, but also in the attachment of additional resistance to exposure to the outside. If you need to really digitally separate the steps, then you need to make the most competently approach to the issue of selection of the material.
Basically, any laminate board consists of several layers. It uses the fiberboard of high hardness, as well as a decorative paper layer. Today there are many varieties of laminate coatings.
The thickness of the layers depends on the manufacturer. Depending on this, the board refers to a particular class. Classification is carried out in several factors. It depends on the type of fastener, which is used to connect panels, from their water resistance, from mechanical strength and so on. There are several types of classifications.
In total there are six main classes of laminate - 21, 22, 23 and 31, 32, 33. If the class number begins on 2, then it is a laminate that can be used in private household conditions. Those classes that begin with 3 are suitable for use in commercial premises, where a large load on the coating is supposed.
Article on the topic: How to make a two-tie roof: step-by-step instructions in photos and video
Immediately it is worth noting the fact that the staircase in the house is a rather complicated design. In this regard, it should be discontinued with a laminate, the class of which is not lower than 31. Only in this case the coating will be quite rigid and capable of confrontation with physical exertion.
The circuit of the inter-storey stairs.
When it comes to acquiring the material, it is worth thinking about the fact that one-piece board should be located on each staircase. Facing the steps must be made using whole pieces of laminate. From individual pieces such work is not done.
In the event that we are talking about the facing of the steps that have different geometric sizes, you need to navigate the largest when buying. The remnants of the material may be needed to finish other components of the steps.
Before you start laying the laminate, it is necessary to put the substrate under each step, which will serve for depreciation. With this method of laying the coating, it will be easy to emphasize each stage of the stairs. In this case, no extra sounds will be published. As such a substrate, it is possible to use a polyethylene film, but it is best if a plug is performed by the material.
Some features
Types of laminate.
If you have to finish a staircase having a complex structure, it is worth thinking about the preparation of special templates. They are cut in accordance with the sizes of each step. In this case, it will be possible to make all the work accurately and avoid the overpowering of the material.
If we are talking about connecting multi-level surfaces, special profiles are used. These profiles have an original structure, which makes it possible to finely decorate the elements of the stairs. Also, these elements are needed so that the load is more evenly distributed on the surface of each of the boards. This contributes to both uniform abrasion.
To separate the laminate ladder, you must still have a different tool in arsenal. The most successful solution for cutting the laminate board is the electric jig. Moreover, there are currently no problems with its acquisition.
Article on the topic: How to combine lambrequins and dense curtains
Not necessarily to use expensive professional models. For cutting of the laminate, the usual jigscription for household needs will be used. If this is not available, then the cutting can be carried out with other tools. For example, for these purposes, you can apply an ordinary hacksaw or a grinder.
Self-tapping screws are very important in this matter. The finish is impossible without them. Each individual element will have to be fixed on both sides. This will be quite enough, as an additional profile will be used for fastening.
Several useful tips
Tools for laying laminate.
So, the finish of the ladder laminate is a rather complicated task that is not available to everyone. For work it will be necessary to maximize construction skills and several days. It is unlikely that you can do one day. Next will be given a few tips that will necessarily help in work.
- So, it is worth starting with the fact that you need to prepare the staircase to finish. To do this, you have to disassemble the old coating. Make it is necessary as much as possible in order not to damage the basis of the steps. Otherwise, the staircase may lose its initial strength.
- When disassembling it is worth paying attention to what elements are present in the steps. If any details were damaged during the work or once before, they should be replaced. If we are talking about a wooden staircase, then this can be done quickly and easily.
- After the staircase is ready for laying a laminate, it is necessary to remove the entire construction trash from it. Only in this case the laminate will fit quite easily. To remove garbage you can use the vacuum cleaner.
- When choosing a laminate for finishing, you must pay attention to the fact that it fits perfectly into the surrounding interior.
If the whole house is trimmed under the tree, then you need to purchase the material that will correspond to this range of shades. If the house is trimmed under the stone, then you can buy a laminate and with such a pattern. Currently, the laminate can have almost any drawing. This means that it is easy to choose the desired option.
When choosing a material, it is worth paying attention to those options that are made of natural wood.
Such a laminate will serve for many years faithfully. Cheap laminate variants are also suitable for finishing, but this is not recommended to do this due to the fact that it does not fit onto the smooth floor, but on the stairs. There will be additional efforts on it. They are completely able to harm the coating. This must be considered. Chinese laminate is not worth buying, as it has low strength indicators. Even if the opposite is written on its packaging, you should not stop your choice. Most likely, this laminate will not last long enough.
Article on the topic: What is beautiful and cheap to separate the walls in the toilet