Knitting Patchwork Spokes: Schemes, Patchwork Knitting Video, Technique and Master Class, Jacquets and Cardigans, Socks and Jacks, Stylish Pullover, Sweaters and Mittens, Photo

Patchwork knitting needles are distinguished from the traditional direction of the fact that the elements of products do not stitch from the pieces of fabric, but knit from the threads in the patchwork, along with traditional sewage, is popular and knitted patchwork. The product is created by the same principle of the mosaic, only instead of flap knitting or crochet, the parts (motifs) from the multi-colored yarn are configured. Creating new schemes and patterns, designers and experienced masters create original blankets, bags, tablecloths, cardigans, dresses, sweaters, jackets, mittens, toys and other interesting extraordinary things.

Knitting technique Patchwork knitting

Patchwork knitting is a comfortable and fascinating view of the needlework for beginners, because the motive in the form of a simple geometric figure of the thread of the same color is easier than to knit a large canvas. A variety of colors pleases the eye, besides, an unsuccessful square can always be tied up, seeking perfection. You can see product options on video and photos.

This technique exists 2 ways:

Connect individual motifs (squares, rhombus, polygons, seashells). Form the elements of the cloth, according to the selected scheme and stitch (needle or crochet) separate parts.
Fragments are connected already in the process of knitting. . For this method, it is enough to know how to read the schemes, be able to dial the loops, the outflow and recovery of the facial loops.

The technique of patchwork knitting implies two options for connecting fragments: the finished elements or the connection are stitched during the configuration process.

Knitted Patchwork Spokes: Schemes

Before knit mittens, jackets and sweaters, you need to master the tuning technique. For example, you can take a width of 15 loops. It is convenient to use the pattern and calculations of the scheme.

To do this, you need to dial 31 = 15 + 1 + 15 loops (the central loop will be in the corner of the square)

All squares in the technique of patchwork knitting are performed as follows: facial loops on both sides. In the second row, there are a reflecting, tied 3 loops in the center together face.

The edge of the squares is obtained with the nodules, for this, the first loop is simply removed, and the latter lie face

After the recent 3 loops, the thread is cut and fixed, pulling it out through the last loop.

For the next fragment on the needles in the usual way 15 loops and 16 more - on the edge of the 1st square - the knitting needle is entered over the edge and the loop is pulled

Article on the topic: The main causes of air traffic jams in the radiators of the heating system

The second square is encouraged in the same way, with refusals in each second row in the center. A number of squares are configured to the planned width of the canvas by analogy with the second square.

After the end of the first row of squares, the second row go to the second row, for which 15 loops are gaining along the upper edge and another 16 in another way: to throw air loops on the needles.

Square knit as usual - facial loops + reduction from 3-central loops

To scout the loops for the second square, on the edge of the first row to dial 15 loops, one more from the angle and the edge of the neighboring square of the second row of another 15 loops. We unscrew the square. Continue knitting similarly while the canvas will not reach the height of the intended thing. Using harvested schemes, encourage the rows of squares in the same method.

It is important to note that the direction of mating is always the same - on the left - right

Knitting tablecloth in the style of Patchwork (video)

Patchwork knitting needles: socks and slippers

In patchwork technique you can knit anything: plaid, cap, cardigan, pullover, mittens and even socks. Master class on the manufacture of slippers in the style of Patchworks will help to master the knitting socks. First you need to prepare the yarn of the same texture and thickness, but different shades and the needles of the relevant number.

Master Class:

Start with the control sample . It will be a square with a diagonal, 2 times shorter of the foot. On the needles you need to dial 35 loops.

In the middle of a row we reduce the loop: to plunge 16 facial, 3 following facial and again 16 facial loops

Continue knitting, having reduced the loops in the center until there will be 9 loops. Now you can measure the stop and compare with the diagonal of the sample. If the results coincided, you can continue knitting if not - to tie the square by increasing (or lowering) the knitting density.
Go to the second square . On the free needle, dial 13 loops from the edge, located on the left, and penetrate their facial loops.
Similarly, you need to arrive and with the 13th loops on the right side.
Now there should be 35 loops on the knitting . They are tied by facial.
We continue to knit according to the scheme which was used in clause 3 until 1 loop remains.
Now you can crop thread And to score 34 loops of the yarn of another shade.

Article on the topic: Eliminate the creaking of the floor without opening: several ways

We carry out similar devices until 1 loop is on the needker again. This side slippers

In the same way The other side is configured.
Return the thread who knitted sock. Dial 34 edge loops and knit the heel with refusals to 9 loops.
Dial 13 edges And to prick a number of facial.
Similarly - with the right Parties.
Keep up to top last square , using the same scheme for the recess.

To tie slip slippers around the perimeter, you need to dial on 4 knitting all edge loops and knit in a circle, alternating faces. and erased. Rows to save the handkerchief. On bends need to be relevant

Pepper in this way 8 rows And close the loops. You can make fitting - slippers ready. If you increase the number of rows for the strapping on the necessary height, you can also connect the sock. The mittens knit for this principle.

Sweaters in patchwork technique with knitting needles

For those who have mastered the general principles of knitting - socks, mittens in the style of Patchwork in the photo, video and master classes, you can swing on a pretty sweater or pullover, especially since the detailed master class is available even beginners.

The scheme is designed for the 36th size, if necessary, increase the pullover, it is necessary to calculate the loops for its size as in conventional knitting.

To work, you will need gray yarn - 350 g, beige - 200g, circular spokes number 4.5

Mesh pattern

The main part of the product is associated with a mesh pattern for which you need to dial loops, multiple by the number of 4-M + 1-A + 2nd edges.

Facial side: edge + rappoport: 2 loops together cross-face + 2 nakid + 2 together facial. The latter is one facial and edge.

Pouring: edge +1 is elevated. + Rappoport: 1 is elevated. + Nakid (ezd.) + Nakid (ezd.) + 1 izn., Edge.

Pattern "braids"

Dial 20 loops + 2 edges. Take advantage of the scheme, the photo shows only the front side, since the iznanka is configured in the drawing, where the nakida is written by purl. The fragment of the pattern is repeated from the 1st to the 10th row.

Detailed pattern circuit shows a complete fragment of the future product

For pattern it is necessary to calculate the pattern density. For a mesh knitting density: the sample 10x10cm contains 18 p. And 24 p. For the pattern "Spit" The density of the web: 20 p. + 2 edges should fit in sample 10x10cm and 24 p ..

It should be noted that the back and in front of the pattern are confused separately, then stitched according to the pattern. The direction of knitting is shown by arrows.

Scheme-pattern backrest and pass

Each part of the transfer and back is sympathetic to 2 times.

Instructions step by step:

Pullover starts with knitting details and gray thread. On the spokes - 39 loops, the canvas is knitted with a mesh pattern to a height of 24 cm (58 p.).
To configure the part in the gray thread, 27 loops are gained, tied with a mesh pattern 74 of a row (30.5 cm).
For the part, 22 loops are gaining a beige thread, they are tied by a pattern of "braids" 58 p. (24 cm).
22 loops are gaining 22 loops for the part in the beige thread and they are tied with a pattern of "braids" 74 p. (30.5 cm).
The pullover is stitched using the pattern.
To tie the shoulder bar, a beige thread of 86 loops is typed by the edge of the upper edge, 4 p. (1.5 cm) with an invalous stroke. Then the loops should be closed.
For the bottom plank, it is necessary to dial 86 loops with a gray thread, tie with a cloth with a 1.5 cm with a purity of 1.5 cm (4 r.) And close the edge.
The next step is knitting the sleeve. The gray thread is gaining 42 loops, taping a bar for 1.5 cm (4 r.) With an invalous stroke. Then knitting continues with a mesh pattern using only the rappoport. For the stems of the sleeve, add from the plank on each side in each eighth row of 9 loops, then in each 6th - 12 times on the loop.
There should be 60 loops on the needle. When the length of the sleeve reaches 33.5 cm (80 r. From the plank), you can close the loops.

Pullover is collected, ranging from the shoulder seams - 13 cm on each side. Then the middle remains 22 cm open hinges for the neck. It remains to sew the sleeves, connect the side seams and seams on the sleeves, - the pullover is ready, and you can move to the fitting.