The mixture for alignment of the floor very well helps to find the perfect surface of the floor separation of the floor only after the arrangement of the durable and reliable surface of the base. This refers to completely any type of base surface. When calculating the floor leveling, special mixtures are used during repair, helping to prepare and fill the solution in the shortest possible time. Among the main advantages of the leveling mixture for the floor, such as high strength and good clutch, a short time of hardening, lightness of fillings and installation, level distribution and high service life are possible.
Types of blends for floor alignment
For high-quality alignment of the floor in an apartment or in the house, cooked construction mixtures are suitable, since for their preparation you only need to add a liquid in the specified proportion and thoroughly stir the mixture with a mixer or a special nozzle on a drill. After that, you can immediately use the finished solution, which will fill all the cracks and irregularities, making the surface of the floor perfectly even and smooth.
Among the main types of mixtures, you can allocate such as:
- Cement;
- Gypsum;
- Polymer.
The mixtures made on the basis of cement differ in the most acceptable cost. When applied, there is practically no dust, due to the addition of unusual additives and resins to the finished composition. Among the main advantages that have similar materials, it is possible to allocate that the composition practically does not give shrinkage loads, it has very good adhesion indicators, it is characterized by high strength, a good frost resistance and failure of cracks are characterized. This is quite durable material and, when performing the fill of the solution, the latter serves as sufficient time.
Floor alignment mixtures may be cement, gypsum or polymer
Important! Mixtures on a cement basis can be easily pouring to an endless surface, as well as carry out repair work in a wet room.
Gypsum mixtures are considered the most practical and qualitative. They are well suited to arrange finishing surfaces, as well as to create a warm floor system. Gypsum remarkably maintains heat, but it does not tolerate high humidity, that is why, before arming, it is necessary to conduct a preliminary hydraulic protection. Such mixtures are distinguished by the fact that they are completely clean, without shrinkage and dry literally in a few hours. In addition, due to the components that are part of the components, this coating looks almost perfect.
Article on the topic: What are the decorative wall stickers for
Floor alignment mixtures made on the basis of polymers are considered the most popular and practical. Polyurethane, epoxy resins and many other components are used as fillers. This tool is characterized by sufficient strength, resistant to mechanical damage, as well as an excellent appearance.
How does floor equalizer apply
An important condition for the arrangement of a completely different gender is the perfectly even and matte base. To eliminate the defects and floors of the floor, it is necessary to choose an equalizer that is represented in the widest range. To get a high-quality and reliable base for flooring, it is necessary to apply several different mixtures for finishing.
In particular, it will be necessary:
- Draft floor;
- Finish alignment;
- The use of special composition.
Initially, a coarse or black floor alignment is carried out. These mixtures help eliminate significant irregularities and defects. Such mixtures are fitted with a sufficiently strong layer, at least 6 cm. Finishing alignment implies the use of fluid or liquid mixtures.
Floor alignment mixtures help eliminate significant irregularities and defects
They help to highlight the surface, however, it is necessary to apply them correctly.
Such a coating is used only when the floor surface is quite durable. Special compositions used to increase strength are perfectly suitable for eliminating individual defects and damage. They only apply in separate sections of the floor, where they need to eliminate individual defects.
Methods and mixes for alignment of concrete floor
Despite the high strength and stability, the concrete base, unprocessed by special mixtures, in time, begins to collapse. Dust can be formed, as well as various chips and potholes. The choice of the most suitable method for aligning concrete floor depends on various factors.
In particular, such as:
- Flooring material;
- Values of the height difference;
- The number of chips and cracks.
The most different levelovers are used, which due to their characteristics are suitable for a particular floor surface. Dry ties, which, in addition to alignment of the floor, also perform insulation and sound insulation functions. The process of arranging the base of the floor by applying a dry mixture is quite simple, and completely anyone can cope with it.
Article on the topic: Braided baskets with their own hands (34 photos)
Align the floor can be different methods
A cement-concrete screed is considered to be a classic option for aligning a concrete base, when using a perfectly smooth and durable base for mounting the finishing coating.
Most conveniently and efficiently can be aligned by applying a self-leveling mixture. The proposed allender brands have their own certain differences, which is why in front of their choice and use, it is necessary to study the available characteristics of the mixture.
Instructions for the use of floor equalizer
When applying a self-leveling mixture for the floor, instructions and consumption of materials should be taken into account. It is necessary to apply the leveling method with special mixtures - levels.
Namely, in the case of:
- Unevenness of the floor or height difference;
- Lack of cracks on the surface;
- After carrying a black base of the base of the floor.
Floor equalizer must be applied strictly according to the instructions.
Before conducting alignment of the base of the floor, it is necessary to study the existing instruction, where it is indicated how the amount of dry mixture goes to the lire of water. Also, with the help of the instruction, you can calculate the solution per square meter of the base. Before performing the fill of the base of the floor, it is necessary to predict it, as this will provide a stronger adhesion of the mixture with a concrete base. All these advantages of dry mixtures for alignment of the floor surface make them simply indispensable materials. The main component included in the mixtures is cement or, in some cases, gypsum. As aggregate, quartz sand or limestone is used. In addition to the main components, in dry mixtures include special polymer additives, due to which the finished solution has a good clutch, plasticity and eliminates the occurrence of cracks during drying.
How to choose a mixture for floor alignment (video)
When choosing alignments for the base of the floor, you need to select high quality materials, since it will largely depend on the strength and reliability of the finished base. And this is the main purpose of repair. I wish you success.
Article on the topic: Smart GSM Outlets