In the process of conducting work on the pouring of the polymer floor, the correct technology technologies of filling flooring is considered very complex, but it is precisely due to certain actions that excellent results can be achieved as an excellent coating that is capable of listening for more than one year. The floor is regularly exposed to mechanical effects, and therefore it is necessary to take care that it is as high quality, durable and wear-resistant.
Polymer floors: the advantages of the device technology
Before arranging a bulk sex with their own hands, initially you need to get acquainted with the advantages and disadvantages of this technology, so that it is subsequently not disappointed and not to get a negative effect.
The bulk sex has pros and cons:
- Elasticity;
- Strength;
- Complete resistance to chemical substances;
- Fire safety;
- Ease of installation;
- The presence of the properties of the dirt pressure;
- Moisture resistance;
- The ability to carry out installation without the help of specialists;
- No special care;
- Smooth surface;
- Anti-slip coating;
- There is a huge variety of varieties, thanks to which it is possible to choose the most creative design.
The polymer floor has many advantages, one of which is a long service life, which is not unlike this technology.
As for the shortcomings, the bulk floors, against the background of the positive sides, have a lot of negative, but they all overlap the fact that the floor will last debts years and will be able to recoup themselves. With the arrangement of the bulk gender, it is impossible to save on materials, as it will affect the aesthetics of the room, as well as for strength, quality and service life.
Popular floors are very quickly yellow.
To equip high-quality floor, you need to pre-prepare a solid base. Dismantling the bulk sex is not too simple, and it will be necessary to use powerful special equipment. If necessary, change the floor covering, it is best to carry out cloths on the bulk sex, which will reduce the height of the walls.
Article on the topic: Stencils for the ceiling with your own hands will help in the room design
How to produce a liquid floor using technology
For the manufacture of bulk sex, it will be necessary to get acquainted not only with technology, but also with its type. It is worth noting that such a coating has a far from a simple classification. To be more accurate, then by what materials are used for the manufacture of the floor.
Materials:
- Epoxy is highlighted by special strength, due to which it is used more often than the coatings.
- Epoxy floor with coins and polyurethane coating has a long service life and increased strength.
- The floor with a base of methyl methacrylate quickly freezes and very durable. It is used mainly for industrial premises.
- The industrial floor of the urea, which is formed by spraying, and for its installation, you can not stop the workflow.
The polyester solution is considered the cheapest and low-quality type of polymer floor, the service life of such a coating will be very small
Polymer floors can be with different thickness. High-strength floor, up to 6 mm thick, designed to install industrial production. Such coatings can withstand any type of load. Floors with medium thickness are 1.5-3 mm.
Thin floor covering, the thickness of which does not exceed 1.5 mm, is used in rooms with minimal permeability.
Remotious coating can have a minimum thickness of 0.4 mm and is used to protect against dust and dirt any concrete floor. In some cases, such coatings are used to impart a certain shade.
Scope of application of Praspan and other types of polymeric floors
Floors on a polyurethane-based basis can be used in the most varied areas of construction - in the industrial construction of workshops, food industry, in the arrangement of the exhibition, shopping or parking hall, in the construction of freezers and refrigerators, including sports grounds.
Article on the topic: Warming of balcony plastic doors for the winter
PRAPAN polymer coating has high strength and excellent wear resistance
In domestic construction used when arranged:
- Bathroom;
- Pool;
- Kitchens and toilets.
As a rule, to improve the floor in sports halls, the formation of the thickness of the lower layer in 15 mm and the upper 2 mm is required, and an epoxy basis is used. In addition, there should be a rubber crumb on the floor in the gym, which creates a rough coating with an anti-slip effect. It is important to remember that the epoxy floor is not so durable as a polyurethane and do not need to put them there, where a strong mechanical impact is turned out to the floor.
Proper application of polymer floors
Before making a polymer application to the floor, it is required to choose a certain type of coating. As a rule, floors choose by certain criteria. It is necessary to take into account the quality of the old base. Be sure to pay attention to the strength of the intended mechanical load. Whether the decorative coating will be required. What properties should have a future floor, for example, anti-static, anti-medical and the like.
To mount the bulk sex, you will need to prepare all the necessary tools:
- The capacity of at least 20 liters in which the solution will be prepared.
- Low-speed drill and electroller. The nozzle must be chosen in length more than the depth of the container.
- Spatula in order to distribute the mixture into hard-to-reach places.
- Spatula-Rakl to align the surface.
- Needle roller to remove bubbles.
- Soles with spikes or paintospace, for easy movement along fresh coating.
- Solvent.
Mixing polymer components is carried out at a temperature of + 20 ° C
The breeding of the color solution needs to be held in a container from the plant. Next, it is necessary to gradually add a clear solution in small portions. To get a homogeneous composition, a special drill is used and a certain nozzle.
It is worth considering the moment that the material needs to be laid on the floor immediately after kneading so that he does not start to push, which will worsen its operational properties.
In order to avoid the formation of the deformation of the floor in the future, it will be necessary to pre-make a deformation seam. Suts are cut on a third of the coatings, and also need to be deleted by means of a special industrial vacuum cleaner. Next should be sealing to eliminate moisture and dust penetration. Emphimatic is perfect.
Article on the topic: Curtains in Italian style - 21 photos in the interior
Polymer floors do it yourself (video)
Depending on which the temperature will be manufactured, a certain period of drying is required. At a minimum you need 2-3 days, which will make the floor very durable and wear-resistant, that is, fully justifying expectations.
The cost of such a floor is not small, and the technology of laying requires accuracy, but all the spent works will not go in vain. The floor will be able to fully justify itself and all the invested forces, means and nerves.