Pallet for shower - Tips for choosing

Anonim

Pallet for shower - Tips for choosing

The high pace of modern life and the desire to save time and means forces us to look at the question of equipping the bathroom with plumbing equipment. And if for a small room of the bathroom, the bathroom replacement for a shower cabin is the ability to significantly expand the useful area, then in large bathrooms, the cabin cabin is due to the desire to save time on the adoption of water procedures and reduce the cost of water payment.

In this article we will tell, what parameters need to be considered when choosing a pallet for the shower cabin, because it is the basis of the entire design and carries the maximum load during operation.

Pallet for shower - Tips for choosing

Place for installation

If you start making repairs from scratch, even before the type of supplying water and sewer pipes, it is possible to locate a tray for a shower cabin anywhere in the bathroom. In this case, we will need to install the sewage systems and water supply, taking into account the location of the plumbing.

Pallet for shower - Tips for choosing

If the pipes are already spent, the choice of space for the shower cabin is limited, as it should be as close as possible to the sewage and tap pipes. However, the latter represent a much smaller problem, because it is quite possible to stretch the eyeliner to the desired place. With a sewer pipe, such experiments are not always possible, so you need to focus on it, including, be sure to take into account its bias when installing a shower pallet. When choosing a place of installation of the pallet for the shower, its size plays an important role.

Pallet for shower - Tips for choosing

Dimensions

Determining with the scenery pallet sizes, you must take into account two important factors: the area of ​​the bathroom and the dimensions of the people who will use the shower.

Standard sizes of square shower pallets are as follows:

  • 0.8 × 0.8 meters;
  • 0.9 × 0.9 meters;
  • 1 × 1 meter;
  • 1.2 × 1.2 meters.

The smallest pallet will perfectly fit into the tiny bathroom in Khrushchev.

Pallet for shower - Tips for choosing

Going over the purchase of a shower pallet is best with the whole family. Let its largest representative experience the pallet on themselves: it's not closely to him inside whether he can move his hands and legs freely, tilt, etc. In addition, if your family has elderly or small children who need help during washing, you should stop your choice on a large pallet, in which two people can accommodate freely.

Forms

The choice of the shape of the pallet also depends largely on the size of the room. For owners of small bathrooms, square and rectangular pallets will be an excellent solution, and the most optimal option is an angular shower tray, it is also called radial, so in shape it is a quarter of the circle.

Article on the topic: Protection of transformer from overload

Pallet for shower - Tips for choosing

If you have a little more square meters at your disposal, then you can choose not only from the right geometric figures. In stores you will find a huge selection of pallets of a variety of forms - round, semicircular, pentagonal, spiral-shaped and in the form of more complex, incorrect figures. "Curvolineic" shower pallets look definitely very unusual, but also partitions for such pallets will have to be made to order, or buy immediately complete.

Pallet for shower - Tips for choosing

Materials

In the manufacture of pallets for the shower, the same materials are used as for the manufacture of baths. Consider the most popular of them:

  • Acrylic products Buyers love for an indoor eye shining whiteness, by the way, white is not the only possible color of plumbing from acrylic, low weight, excellent thermal conductivity and convenience in care. Minus acrylic pallet is that it is definitely enough and often needs additional reinforcement.
  • Cast iron plumbing It makes us happy for many decades, but recently it falls its popularity. This is due to the fact that the products from the cast iron are very heavy and the installation process is not necessary without any assistance.
  • Steel pallet - The most inexpensive. Steel plumbing is famous for its strength and reliability, however, it is not disappeared. Enameled coating is subject to damage and therefore quickly loses its appearance. In addition, the level of noise insulation in cast iron products is extremely low.
  • Faians Plumbing Today you can find in almost every bathroom. From the faience, not only the toilets and sinks, but also shower pallets are produced. They have excellent characteristics: very aesthetic appearance, stability and wear resistance. Faians lack the same as acrylic, namely fragility.
  • Pallets from artificial or natural stone Give you pleasant tactile sensations, besides, you can choose from a variety of options forms and colors. In addition, such pallets perfectly absorb the noise of pouring water.
  • Caril is the newest of the materials presented. It is an alloy of quartz and acrylic. The coniferous shower pallet has all the advantages of the acrylic product, but is delivered from its flaws. The only minuses of such a pallet is the high cost.

Pallet for shower - Tips for choosing

Pallet for shower - Tips for choosing

Pallet for shower - Tips for choosing

Pallet for shower - Tips for choosing

Pallet for shower - Tips for choosing

Pallet for shower - Tips for choosing

In addition to the described materials for the production of pallets for shower cabins, in the plumbing market, it is possible to find products made of tempered glass, wood, as well as combined models.

Pallet for shower - Tips for choosing

Height

Height, or the depth of the shower pallet - an important characteristic that is not worthless.

Article on the topic: Electric circuit drawing programs

Allocate:

  • deep
  • Low pallets for the shower cabin.

The height of the pallets is usually from 4 to 25 cm. It does not depend on the availability of free space in the bathroom, but depends on the many other nuances:

  • The height of the ceilings and the height of the shower partitions. Everything is extremely simple: the main thing is that the design that turned out in you in the end is free to fit between the floor and the ceiling of the bathroom.
  • Design of drain siphon. When choosing a depth of subword, it must be remembered that the siphon will be located under it. It is important to mount the pallet in such a way that at any time you can get to the siphon for repair or replacement.
  • The physical health of all family members. If there are old men in the family or people with disabilities, it is better to purchase the smallest pallet in order for the entrance and exit from the soul to be difficult for them.
  • The presence of small children or animals. Children love to splash in the bathroom, which can successfully replace a deep pallet. In such a pallet, it is also convenient, for example, wash the dog after a walk.
  • The presence or absence of a bathroom in the house. If there are no baths, it is better to stop your choice on a deeper pallet, as it can perform some of its functions. For example, if a washing machine broke, in a deep pallet you can easily wipe underwear.

Pallet for shower - Tips for choosing

Pallet for shower - Tips for choosing

Installation

If you have already had the experience of handling plumbing equipment, then the installation of the shower will not make you any work. Beginner builders will come to the rescue of our recommendations.

  • Shower pallets are produced both with legs and without them. If you are not sure that the floor in your bathroom is absolutely smooth, get the model on the legs. Adjustable legs will help to give the pallet accurately horizontal position.
  • Pay special attention to the supply of water and sewer pipes. Check the quality of the connections, when necessary, compact. In the future, this may save you and your neighbors from the unpleasant consequences of the breakthrough of pipes.
  • If the pallet is mounted near the wall, be sure to treat the clearance with a special sealant for the bathroom.
  • After installing the pallet and connect it to the sewer and tap pipes, let the water and check the tightness of the entire system. Remove the detected leaks.
  • If the design provides for the enclosing partitions, you can begin to be installed. To begin with, using the construction level, apply marking on the wall. Then, in the appropriate places, secure metal profiles.
  • Insert into partition profiles, usually they are produced from tempered glass or fiberglass, and secure them.

Article on the topic: A variety of shells: Washbasins and washes.

Shower cabin ready for use!

Pallet for shower - Tips for choosing

Pallet for shower - Tips for choosing

See the following video for installing a shower pallet.

Security and accessories

The bathroom is one of the most hidden premises in the house. Which of us did not climb on the wet tiled floor or did not hit the side of the bath? In the shower, there is also a danger to get a bruise or more severe injury. In order to avoid this, stop your choice on the pallet with a relief pattern. If you still purchased a pallet with a smooth surface, you can protect yourself with special anti-slip stickers or a rubber rug, put on the bottom.

Pallet for shower - Tips for choosing

If there are older people in the house, do not forget to equip the shower cabin, which will help to keep on the legs and avoid falling. Grandparents, as well as young children, be sure to enjoy the seat installed in the shower. Even a small bench will make a wash process much easier and more convenient for them.

Pallet for shower - Tips for choosing

Pallet for the soul with your own hands

If you still failed to find a soul tray in stores, which meets all your requirement, or the presented models seemed too expensive to you, We recommend making a shower tray with your own hands.

  • On the concrete screed, pre-laid on the floor of the bathroom, put wooden bricks to install the drain and the tap tube. Such supports will provide a water pipe required slope.
  • Lay out the walls of the future pallet with bricks or cement blocks.
  • At the bottom of the pallet, put another layer of a concrete screed. Try to do it in such a way that the slope for which the water will go into the drain. You do not need to lay concrete to flush with a drain neck, leave a place for tile.
  • Give the screed dry, then boot the resulting pallet. After the primer is dry, treat it with a sealant.
  • Next, you need to make the walls and bottom tiles. Use special tile glue for this.
  • Treat stitches between tiles grout.

Congratulations, you managed to make a soul tray yourself!

Pallet for shower - Tips for choosing

Pallet for shower - Tips for choosing

Pallet for shower - Tips for choosing

Tips for choosing

So, in order to make the right choice, you need to decide on the size and shape of the pallet and the material from which it is made. These factors depend on the size of the bathroom and the composition of your family - the age categories are important, as well as the growth and weight of each of its representatives.

Pallet for shower - Tips for choosing

Choosing a shower tray, do not forget to take care of how safe it is for your household, and, if necessary, purchase additional accessories. And those who do not recognize the finished solutions, armed with our article, can build a pallet for the shower with their own hands.

Read more