Quickly and easily laundering the floor tile after repair is easy if you get acquainted with the advice of specialists in the composition of the floor tiles are usually clay, sand and aluminosilicates. The mixture is molded and burned. The firing is one-time and two-time with different temperature regime, the firing can be with the application of glaze or without glazes. The quality of raw materials and the firing method determines the type of ceramic tile and its surface. Depending on the method of production, composition and surface, each type of tile requires an individual approach to clean and care. So what was laundering the floor tile after repair? The question is simple, and the answer implies the presence of some knowledge of both the surface of the ceramic tile, and about the means that can be applied.
Than quality laundering tile after repair
Ceramic tile or just a tile in the modern interior of the premises, an indispensable material, because Practical, comfortable in cleaning and beautiful, gives the room a complete neat look. The only thing that can grieve greatly is contamination of the tile after repair.
In ceramic tiles, the surface can be non-polished, semi-altered, polished, embossed and glazed.
Depending on the raw material, the surface can react to the chemical composition of the treated surface, and may be indifferent to the action of aggressive means. Clinker tiles are formulated by extrusion or wet pressing method, and then a long firing is used at high temperatures. Porcelain stonewares produce a semi-dry pressing method and just like clinker tiles, the porcelain stoneware is burned at high temperatures. These types of universal use tiles and widespread use, they are lined with facades, laid on the floor, on the walls in homes and apartments, are used in landscape design, etc.
Article on the topic: Sample Balcony Repair Application
Qualitatively laundering the tile after repair using both self-made and purchased mortar
After the repair, unfortunately, the tile is contaminated, and the pollution is such that the usual soapy water is not laundered. Sometimes the question is very sharply, than to wash the tile after repair?
Methods of cleaning tiles:
- The frozen adhesive solution is wetted by water in which vinegar or ammonia is dissolved, then mechanical efforts are used using any ripening equipment, such as a spatula, scraper, screwdriver, etc. or use chemicals based on solvents.
- The absorbed primer is washed off by special means, which contains solvents, acetone or can be used by fresh primer, then just consider the utility tools.
- If the tile is contaminated with cement grout, lime or plaster, then it can be simply washed off with water, but for epoxy grouts will have to buy a special epoxy solvent.
- Building dust, putty first can be removed with a dry rag, a vacuum cleaner, and then it is proposed to wash with just water or soap solution, water with lemon, vinegar or a glass washing tool.
- Silicone sealant or paint is cleaned by a mechanical method or use solvents based on acetone or White spirit.
Successful cleaning of the tile folds from the correct definition of the type of contamination, the surface layer of the tile itself and the use of the appropriate means, but the best means of cleaning all types of tiles will be protected before repair or timely cleaning of pollution.
Tile on the floor: than laundering it after repair
Ceramic tile, very durable finish, resistant to the effect of aggressive chemical solutions, however, requires careful relationship. Even if all visible contaminants were wiped when laying a ceramic tile, nevertheless, the sex tile must, first of all, clean from dust particles and visible dirt, tested on it, then flushed with soap solution, and to give gloss when washing with clean water, Add vinegar to it, citric acid or ammonia alcohol.
Article on the topic: Standard sizes of balcony doors
In order to launder the floor tile, you can use several funds, including water wash liquid, hydrochloric acid, or liquid for glass cleaning
Ceramic tile can be cleaned by applying the following sweater:
- Fluids for washing the bathrooms, smearing the stains in several methods in layers;
- Apparent salt apply to pollution and moisten with water;
- Salt 5% acid;
- Liquid for cleaning glasses splashing on stains;
- Tooth powder apply on a stain, wet and lose a rigid brush.
If the contamination is significant, then you need to use the cleaning agent, after reading the instructions for use. But, if it was trying everything, it would not be laundering a tile, then you will have to buy a special remedy for a particular type of pollution, and the residues are washed off with a purchased drug from spots.
How and than laundering a primer with porcelain stoneware
If the porcelain tile was stained with a primer, and there were unpleasant white divorces from it, it can be cleaned by the means of household chemicals that have an acid in their composition.
Head facilities can be detergents for bathrooms.
If the divorces after drying appeared again, then it is necessary to apply a bath for washing the bathrooms, cover with a wet rag and give to mock for an hour, then pollution is carefully lost with a rigid brush or washcloth, then rinse with clean water, and quickly wipe the contamination dry.
It is easy and enough to quickly wash the primer with porcelain stoneware using submitted detergents.
Eye away, dried primer is difficult to drop from porcelain stoneware, it is recommended when the repair is carried out, respect the following precautions:
- To cover with polyethylene film or other protective material tile from porcelain stoneware;
- Wipe pollution immediately, as they appeared, do not allow them to absorb them and dry out.
- If the tile surface is unsalted or half-polished, special protection is needed.
It is necessary to apply the drug on the tile of porcelain stoneware, a rigid sponge to rub it over the surface, and then rinse with clean water. Be careful to your ceramic tiles, and then you do not have to wash it with all sorts of chemicals.
Article on the topic: Morid for wood: Water-based colors, white with your own hands, photo oil and bleached oak, toning
Cleaning elements tile after repair
As soon as the repair ended, it is necessary to put everything in order, especially in cleaning there is a tile, which was placed in the premises, both on the floor and on the walls. The tile matte tile is cleansed with means that should not contain organic acids and fats, because they can destroy the top layer of tiles, because Her surface is porous. To clean the glossy tile, do not use soda and household soap, metal brushes or washcloths.
If you need to wash the tile after repair, then first you should prepare detergents and special gloves so as not to damage the skin of the hands
After the repair is completed, it is carefully necessary to check those places that can be the most contaminated:
- Surface near the seam;
- Cement divorces over the entire surface of the tile;
- White spots from primer.
If machine oils, enamel or resin got on the tile, traces from rubber, candle wax, then they can be removed by a nitro-solvent, acetone or turbidar. Ordinary animals or vegetable oils can be washed off by caustic soda.
Ink, lime, rust, pieces of cement and glue can be removed from ceramic tiles with acids with acids, for example, hydrochloric, oxalous, etc.
Solutions: How to wash out floor tiles after repair (video)
To clean any type of tile, it is not recommended to use abrasive cleaning products, because Abrasive particles destroy the top layer of ceramic tiles. Take care of your tile, carefully take care of her, and she will delight you with your beautiful view for a long time.