Many specialists for the organization of the floor recommend using sex rack the main part of the house can be called the floor. Floors depends comfortability and comfort of a modern apartment or any home. Optimal to cover the floor is a tree. Since walking on this floor causes not only pleasure, but also useful for health. Wood coating is not necessarily painting and varnishing, as there are other methods of processing that can protect the wooden surface. Sex rake is the most common option. She comes to work in all rooms. Sex rake in many criteria exceeds other materials.
Fireboard laying: 4 grounds for work
The floor of the board can be laid under any overlap, and above the support pillars. The most important thing is pre-treatment, only after that you can start choosing the coating option.
Before starting to lay the floorboard, the surface should be treated
For the base of the flooring of the floorboard, such floors can be used:
- Aligned floors with a concrete or polymer tie;
- Laid bricks, or any coating without a lined layer and screed;
- Plywood moisture resistant;
- Former wooden coating or black shelling from lumber.
Which ways you use - depends on your room.
Upon completion of the room of the room with windows and doors, the wooden floors are mounted. The floorboard is very susceptible to moisture and therefore if the moisture on the wall exceeds 12%, then the installation will not be allowed. The boards will also be deformed in the case of a humidity of 60%, they will crack and pire. For installation on a concrete slab, it is necessary to free the saw material from the package for 2 to 3 days before installation, without nulling to the surface to lay the boards, or simply leave them in the room for addiction to the environment where installation will be carried out.
Article on the topic: Cozy balcony in the style of Provence: A good solution
Fastening the floorboard on wooden flooring
Powder floors are a popular view of the coating. In many cases, masters cause for this type of work. And there are masters who can make such a type of installation.
A fairly popular coating option is the floor of the table
For self-installation, such fastening methods are used:
- On lags;
- On the false basis;
- On old floors.
Each of the ways has its own characteristics and therefore it is necessary to study them carefully.
If the screed from concrete is not used, it is better to lower the rails using lags. This can be done using beams, overlap, or navigate to clean coating. They serve as a cheap leveling layer, which is located in separate areas, that is, in places of irregularities, and are strengthened there. Then the boards are placed on them. But, unfortunately, this method has drawbacks. The formation of voids, which in the future may lead to the appearance of mold or fungus, in the event of moisture in these voids. The malfunction of the lag will cause the breakdown of the boards. But, despite the disadvantages, this method of laying lags is the most efficient. Since in place in order to align the screed, you can simply put several dozen lags, and attach to the base, and the gaps between them insulate. The floors will quickly be ready for this technology.
Self-tapping screw
Many use special self-tapping screws to sharpen and dock the rails. These self-tapping screws are perfectly fixed and create a reliable installation of the floor covering. Such self-tapping screws are a bit more expensive than ordinary, but in terms of indicators are superior to standard material.
If you decide to independently make flooring, then first will need to prepare special screws to work
Excellence of special screws for fasteners of the floorboard:
- Such, self-tapping screws are equipped with a protective coating of corrosion.
- At the end of these self-tappings make a mill for the convenience of installing the floorboard without preliminary drills.
- Self-tapping screws are made with a special cutter. The degrees make such an angle, which are guided by screwing and it easily entered the board, while not splitting it.
- Another feature of these screws is the lack of carving under the Hat, which contributes to the dense fit to the geepboard.
- These screws are manufactured by standard sizes from 3.5x35 and to 3.5x50 mm. The parameters of such screws are selected depending on which thickness is the floorboard.
Article on the topic: How to repair the bathroom in Khrushchev
Using such self-tapping screws, you can not be afraid of the quality of the work done.
Sex board floor: Nuances in mounting
All fasteners we studied, and now you need to figure out how to lay floorboards using various ways.
For the installation of lags, it is necessary to carefully prepare an outdoor coating.
Can be used in a flooding board in various ways, choose which you can at your discretion
If we put the material on the old floor, you need lags to nail with nails or fasten with screws.
Adhesive is another option for fastening to lags. In the event that a distorted beams act as the basis, the lags should be attached to the side of these beams and observe the level. It is necessary to position the lags so that the load on them is evenly distributed. For reliability and confidence that everything is done correctly and for a long time, you need to know the method of fastening.
When laying on a false basis, no problems have misally. If this technology is used, the boards must be laid on a flat base and have a visual species of solid monolithic manufacture. In order to get a durable floor, all the boards need to be connected to a special connecting element as thorns, grooves, lock or kleimer (curvators). In the event that you do not have such elements, you can use the cutter cutter. With it, it is very easy to pull any genital boards with each other.
Mounting Rules: Sex Rake (Video)
Carry out the installation of genital regions is a truly difficult task, and it is not for everyone. If you are not sure about your capabilities, it is better to entrust this business to professionals that organize work in a short time. If you decide to do this case on your own, then you will consider all aspects of laying, and this article will help you to fulfill the fullest work in stages.
Article on the topic: Preparation of walls under painting: putty, starting plaster and final stage