Package for the parquet is used to eliminate all the disadvantageous type of parquet on the floor and its functional qualities depend on how much all the rules for laying and care will be observed. Changing temperatures, humidity in the installation process, all this can lead to cracks. This is due to the fact that the tree has the property to dry and narrow, and in the case of a high temperature, on the contrary, swell and increase. All these changes violate the integrity of the parquet. To eliminate these disadvantages apply putty for parquet.
Putty for Parquet: Tips for work
The putty is considered to be one of the most inexpensive and simple technologies for the repair of wooden floors. This method is applied for quite a long time in working with parquet. When working with this material there is a certain positive side, it is the minimum dismantling of the floor. But we can say that not everyone uses putty, as it will dry for a very long time, it can be perceived as a flaw.
Before starting work, experts advise the following. In order for your sex to be smooth and did not have flaws, horizontally need to knock the beaches-beacons, and between them will be filled with a mixture, the basis of which includes PVA and sawdust glue.
Before starting to put the floor, you need to prepare the basis
For a good end result, you should familiarize yourself with the 13th main advice:
- Before mixing glue and sawdust, they need to be moistened and squeezed. After carrying out such an operation, you eliminate the option of rapid absorption of glue.
- The mixture must be caused by a thick layer several times. Each layer must be at least 2 cm thick.
- Be sure to wait for the mixture completely drying. Only after it becomes dry, you can begin to apply an alignment material.
- Floor alignment is a very laborious process. It is possible to cope with it, but only subject to the use of a special grinding machine.
- Before starting work, be sure to inspect the floor surface. All nails that are on the genital boards should be recessed.
- The cycle must begin from one corner of the room. All subsequent movements should be like snake.
- Initially removed the dirtiest top layer. Only after that you can proceed to careful processing of seams and holes with putty.
- Pick the color of putty in accordance with the coating. The correct color ratio is the key to a beautiful view.
- It is impossible to continue cyclish. Wait for a complete drying of the putty layer.
- There is a secret to restore damaged boards. It is enough to remove them, turn over and install at the same place. Texture and color will not differ different.
- If you do not have a grinding machine, use the manual apparatus for the cyclove with your own hands. It is convenient to use it in places that are difficult to access.
- After the work is completed, the room should be carefully spent. This will help remove all the fine garbage.
- Before applied to the surface of the varnish, the floors should wipe with a special cloth. It is best if it is processed in a solvent.
Article on the topic: Correctly choose solvent for paint
All these actions, subject to accurate compliance, will become the guarantor of the perfect end result.
Grout for parquet: why choose oil
You most likely heard that the parquet can be covered with only one butter, without applying varnish. This option can really be used in the form of a finish coating. According to experienced people, oil in some parameters even surpasses varnish.
To speak more precisely:
- Butter is better hooked with wood. The varnish stands out by its ability to be absorbed into the surface of the planks, and the oil penetrates the material perfectly and fills them. In this regard, the tree acquires good density and durability.
- The oil allows the wood to "breathe" this cannot be said about Lake, which delays excess moisture.
- Due to the fact that the lacquer does not have increased absorbability., After a certain time, it begins to crack and peel. Oil does not have such indicators.
As a grout for parquet, experienced specialists choose oil
Parquet in oil needs to care throughout the workflow. For this reason, it will sometimes be necessary to update the finishing layer. For this work, you need to take impregnation with a large percentage of solvent. It will be able to penetrate the created layers of oil, thereby updating all protective properties.
Parquet oil can be both white and color. If you want to leave the natural color of your coating, then use white color. And if you wish, give a tree a special tone, use colored oils.
Parquet putty: how to choose a ready-made composition
Many prefer to create a parquet putty on their own, but why, if you can purchase the ready-made composition in a special store? They can be different types and colors. This will give the opportunity to choose exactly the type that is suitable for your floor covering.
Article on the topic: Upholstery of the entrance doors Dermantine: detailed instructions
Parquet putty can be different types and colors
Highlight 3 main types of finished compositions:
- Acrylic. Such a putty is indispensable if you want to give your semi water-repellent properties. It is elastic, withstands most mechanical loads and is environmentally friendly. In addition, it is able to increase the service life of the coating.
- Based on solvent. Here the main component is chips of various trees. It is easy to apply, dry pretty quickly, but it has an unpleasant odor. Therefore, we need to use such a putty in a room with good ventilation and ventilation.
- Spike melts. They are a solid type wax that is used to eliminate defects. To apply such a putty, a special tool will be required, which is used only by experts. Therefore, it is very rare independently used.
All finished compounds are produced by the manufacturer, given all customer needs. Therefore, to acquire a finished product will not be difficult.
How to put parquet
The putty process can not be called a cunning business. The composition is simply applied to the surface with a metal spatula, and then it is simply straightening with circular motions.
In this work, all chips, cracks or seams will be completely filled with putty.
Before starting spitting of parquet, it is necessary to remove all dust and dirt
In order for your coating to light as long as possible, it is very important to pay attention to the correct mount, and before proceeding with the shtlock, it is necessary to remove all dirt and dust.
After the putty dries, everything must be carefully removed with the spatula, and the coating itself must be polished. This work can be performed not only after parquet will be installed, but also to repair it, as well as as removing flaws.
Parquet Shock (video)
Parquet putty is an important and responsible step when installing a natural type flooring. The process is not complicated, but needs attention and proper selection of material. It is very important to take into account all, especially those protective properties that have already been used and the ones you want to see from your new finish. Therefore, approach this case does not rush with the mind.
Article on the topic: Luggage storage in the refrigerator