The main function of the screen under the bathroom is aesthetic. Agree, if all pipes, valves and cranes will be visible, then this is a little pleasant. To do this, you need a screen under the bath. Skillfully selected and made in combination with a common interior he will make a pleasant moment in the general view of your bathroom. Imagine that your screen imitates the seabed. What a pleasure to plunge into such a bath! How can I make a screen under the bath with your own hands?
Main functions
You can buy a bath with a ready-made screen, however, it is expensive pleasure. The screen is quite realistic to make yourself. Moreover, the modern industry offers a rich palette of materials for its manufacture. As a result, we get at the same time saving money and exclusivity, in accordance with your own taste.
Plus also in the fact that we can expand the functionality of your screen and turn it into a comfortable place to accommodate the most we need items. Under the bathroom, you can place all sorts of lockers and shelves, where detergents or other objects necessary in the farm. Therefore, before proceeding with the design of the design, you need to decide whether your screen will be intended to implement what functions.
If communications are held under the bath, which violate harmony in the room and need to protect against mechanical damage, then there is no longer necessary to speak about the placement of the shelves. In this case, the screen must close the communications and perform only aesthetic function.
Materials
The initial stage of the work is the manufacture of a frame under the bath. It can be made wooden from racks or from metal profile. Wood you need to use moisture resistant. Be sure to apply on it the composition that fights fungus and mold. When measurements, use the construction level. It is very convenient for them when applying corners of the bath corners on the floor and walls.
Measures for creating a frame
If the bath takes the angle of the room, then we will work with three outer angles.
- We put the projection points of these corners to the floor and connect them with a marker.
- We extend the line on the wall to connect with the corners.
- Apply the lines parallel to the already battered. The second lines must be applied inside the width, which is equal to the width of our facing material.
- Bruks of the required sizes are cut from the rivers, which will then be mounted as plasterboard, plastic or their alternative. Two equal length and width of Bruck bath for top and exactly the same for the bottom of the frame are made. And then cut vertical connecting.
- You can connect mounts with self-drawers. It is recommended to perform holes with a smaller drill than self-tapping screws. In this case, the wooden product will not occur. Metal corners can be used as fasteners.
- Do not forget to attach the design to the two walls adjacent to the bath. The bottom of the frame is attached to the floor. Fastenings should be reliable.
Article on the topic: Sex rail: laying of boards and installation, how to mount the screws on the floor, lay and put it right, lay down
If the design is made of wood and floor in the bathroom, too, wooden, then for this use various self-tapping screws. And if the floor is concrete, then without a dowel can not do. When the frame will be ready, fill the bath with water to see whether the drainage will decide. And only then you can proceed to the procedure of the trim.
Classification based on materials
Plastic
For its manufacture, the plastic panels will be required. The choice of shades is huge, so you can pick up the color that perfectly fit into the interior of the bathroom. Frame for such a screen can be made of wood. But if you want the screen to be more functional, you should make it sliding.
In this case, the frame frame must be aluminum. If it is made of iron, then it should first be covered with primer, and then paint to avoid the appearance of rust. Plus, guides are needed for the free movement of plastic doors.
Procedure:
- Doors do easy. It is necessary to measure the distance between the upper and lower guides - it will be the height of the door, and make cutting from the plastic corresponding sizes.
- So that in the process of operation, our doors do not fall apart, it is recommended to smoke their inner side of Scotch.
- Panels set between the guides on the principle of spike grooves.
- Attach the handles that can be purchased at any construction store.
- Be sure to place the joints of the bath and the screen to work the sealant. Any plumbing, the surplus of which can be removed by an ordinary cloth. This procedure will eliminate your design from the formation of mold and fungus.
From drywall
Plasterboard is considered the most flexible material to use. The on-screen frame can be either made of wood and metal. Wooden frame must be processed by antiseptic soil. Otherwise, not to avoid mold and rot.
When designing a frame, it is important to take into account that the drywall will turn into some other material, so in measurements you need to not forget about its thickness.
Article on the topic: Country toilet for three days do it yourself from Valeria Kazyutina
If you set the tile with the facing, then the second inner parallel line, we wrote about it higher in the section on the modeling of the framework, will be moved into the depth of another 4-6 mm.
It is necessary to use moisture-resistant plasterboard. The level of humidity in the bathroom is raised, so the usual will swell and collapse. It is important to pick up the desired length of the self-tapping screws so as not to damage the edges of the bathroom, if suddenly the self-solense will switch the plasterboard. Self-tapping screws are located at a distance of 15 cm from each other around the perimeter of the sheet.
Next, plasterboard should be covered with primer and entertain the material that was selected for this earlier. It can be a tile of a variety of colors and textures, plaster, film and resistant moisture wallpaper.
From MDF.
The process of plating the MDF screen is practically no different from plasterboard facing.
An important point is the presence of slots performing a ventilation function. They can be made small: 5-10 cm long, 2-3 width 2-3 cm. So that these holes do not spoil the appearance of the screen, they are covered with plastic decorative lattices. MDF sheets should be processed on both sides with a special water repellency, then primer. After drying, the sheets can be mounted for a frame.
From puzzle plates
The screen from this type of materials will be very durable, but volumetric due to the stove thickness (8 cm). Be sure to check the design with a plumb.
Places where such a screen will be attached: walls and gender, you need to clean well and primed. As a binding means, it is suitable: plaster on a plaster basis or glue for tile. At the same time, the puzzle plates should be moistened with water. The presence of grooves and ridges make the process uncomplicated. We only need to carefully monitor the correctness of the laying.
For cutting plates use wood hacksaw. Plates need an additional decoration, as they themselves do not look attractive. For this, various decorative plaster, paint. Or you can use facing ceramic tiles.
Article on the topic: Which tape is better for wiring
If you decide to use tiles as a facing material, it can be attached to liquid nails, catching the glue points onto the back surface of the tile. Five points will be quite enough. It is necessary to start the facing process from the upper left corner.
Types of constructive features
Screens are the most different on the configuration.
- If you completely embedded the bottom of the bath, then this is a deaf screen. The inconvenience of this modification is that in the event of a leakage, look under the bath and eliminate the flood will be problematic. And even more to do with repair. You have to break your work of art.
- One of the convenient components of the screen elements is a niche for the legs. If the family has a small child, then such a niche is just a find for mom. You can use such a niche as a place to store washing supplies.
- Another type of design is the screen with the doors. They can be sliding or swinging. Plus the sliding doors in the fact that they save space. If the size of the bathroom allows you to install both swing doors.
When designing your screen under the bathroom, guided by its functionality. And, of course, he should not be somehow the stifted spot, unwritten in the overall concept and style of your bathroom. Everything should be harmonious.
Ideas for registration
When making the screen, you can give the scope of your imagination.
- You can add a retractable shelf on magnets. It will come in handy for storing various trifles that we use in the bathroom: Combs, shampoos, bath foams and others.
- Another element is curtains. The most low-budget design element. It is suitable if your bath has non-standard forms and the hard screen is impossible. With a skillful selection of curtains in combination with additional elements of the decor, you can create a pretty cozy bathroom. Consider only that the curtains should easily be removed, as textiles require washing.
- Summary expands the space of the mirror. It can also be used when clearing the screen.
- Matte glass is an interesting idea for registration. They are monophonic, matte, colored, with patterns and various textures. The glass is quite durable, so its use is safe, so boldly pick up and combine it with the interior of the bathroom.
