Aligning the wooden floor, you can significantly improve its appearance and make a more practical tree - it is an environmentally friendly, attractive material. But, unfortunately, wood is subject to all sorts of changes. These changes may create the greatest difficulties when wood is used as an outdoor coating. Boards, with time they can disappear, rot, start creaking and fade, creating a difference in the height of the coating elements. Floor repair, in this case, is mandatory. How to align the wooden base yourself - read in the article.
How to align the wooden floor, without breaking the boards
The most convenient, affordable and fast method of repairing a wooden base - with plywood. The main advantage of the alignment of the wooden base plywood is that it is possible to carry out repairs without breaking the boards. In addition, to align the old floor in this way can be without professional help, with your own hands. You only need to take into account some features when working.
If you need to align the wooden floor, without breaking up the boards, it is worth using a grinding machine
Working with plywood, such nuances should be considered:
- If the floorboards are the same size and with uniform defects, but you can choose a thin phanener. If irregularities are varied, then the thickness of the sheets should be at least 150 mm.
- If the uneven gender has deeply asked fragments, then Faneru should be kept on the belt support. For this use mini lags and shabbes.
- Lags should be attached to the boards using self-tapping screws or long dowels with a distance of 0.3 m.
- If the drops at the height of the floor are in the range from 1 to 10 cm, then when mounting the ribbon base, bars should be applied with a different cross section.
- Phaneur should be laid according to the principle of brickwork, avoiding cross-shaped joints.
Article on the topic: Decor of the old door with their own hands: Stained glass window, decoupage, cracker (photo and video)
Plywood sheets are mounted to the boarded floor without a ribbon base with screws. At the same time, there is a distance of 0.2 cm between sheets, which, at the end of the work, put sand. In order to additionally heat and sound control of software, the sections of the belt base can be filled with polystyrene foam, a mixture of sawdust with PVA, foam or small clay.
Self-leveling technology: how to align the old wooden floor
If the height differences between the fragments of the wooden base are in the range of 0.3-1 cm, then the coating can be aligned using a bulk polymer mixture. This method is ideal for the preparation of sex under the finishing coating with sensitive materials (linoleum, laminate, carpet).
Align the old wooden floor can be easily using a self-leveling mixture
The leveling of the wooden base using a polymer mixture includes such steps:
- Floor preparation. The base is cleaned of dust and dirt, polished and coated with primer (for better adhesion of polymer material with a base).
- Preparation of the repair mix. The solution is mixed according to the instructions from the manufacturer. At the same time, the amount of the mixture is calculated with the meaning that the polymer begins to stick 20 minutes after the kneading.
- Filling the floor. The base in large rooms is flooded with parts. At the same time, you need to work quickly. Running the composition with a special tool - rochel for bulk floors.
- Finish coating. Depending on the further finish, the screed can be cleaned and covered with linoleum, laminate, etc. or by coloring acrylic composition.
In order for the coating to be smooth, you should use a building level or laser. To achieve the strength of the screed, you can pour the industrial bulk floor to the reinforced grid.
Cyclical: how to align the board
You can align the boardwalk with a cycle. But this can be done only if the coating is of a large enough width and will not suffer from removing several boards. Most often, it is resorted to the repair of floors in a private house.
The squabble will help not only align the floor, but also emphasize the drawing of the wood. After construction work, only reveal the main varnishes.
For the cyclovka, you can use the electrolaw or squirrel grinding machine. The first can be bought in a construction store, and the second is to rent. You can work with a handbank. The cost of such equipment will be significantly lower than the above devices, but, nevertheless, only the mechanical shutter will allow performing work.
Article on the topic: 5 options for applying asymmetric curtains on the windows
After performing a dump truck, you will get a beautiful and updated floor covering
Working with any tool in protective glasses, respiratory mask. If the machine will be used for repair, it is necessary to purchase and headphones blocking sound.
Before proceeding with the cycle, it is worth checking the condition of the surface: clean the wooden floor from garbage, dust and dirt, score all sticking nails, remove rotting boards, check all the wooden planks are nice to the floor. Start repairing the floor follows from a long corner of the room, moving towards the doorway "Snake".
Furniture installation: how to align the cabinet on the uneven floor
It often happens that the floor looks attractive, its elements are not deformed, but, at the same time, the base is oblique. Installation of furniture on such uneven semi can cause great difficulties. And if low accessories (stands, bed) can still be placed, then to furnish the room with high and heavy cabinets will be quite difficult: such furniture items can be cubed under weight clothing.
To align the cabinet on the uneven floor, the lining should be used, which can be made independently from any materials.
Align the wardrobe on the wooden floor in several ways:
- Put under the legs or the base of the cabinet wooden bars. Bruks can be painted under the color of the closet. This method is simple and efficient. It is possible to implement it quickly. But, often, the substrates look unattractive and stand out against the background of furniture and gender.
- Purchase accessories with legs that can be adjusted in height. This option will allow you to perfectly put a wardrobe even on a strongly inclined floor. At the same time, the furniture will look attractive.
- Fix the cabinet on a special frame. If you order the furniture on the legs there is no possibility, then a wooden base can be made under the closet - the contour, strengtled in the middle ribbies. At the same time, the contour height on one side should be greater than on the other (to level the slope of the floor). You can make the base from the tree, and to separate the materials suitable for the decoration of the cabinet.
Article on the topic: How to close the pipes in the toilet?
But, nevertheless, these measures are temporary and better resort to the overhaul of the floor. A smooth surface will not limit you in the furniture and will allow you to freely make the permutation of the fittings, if desired.
Tips: how to align the wooden floor (video)
Today there are several ways to repair a wooden floor without professional assistance, with their own hands. The most popular includes: alignment using plywood, bulk mixtures (can be realized, without opening the base) and the cyclove (requires partial removal of the material). The choice of method depends on the financial capabilities of the owner of the apartment, the thickness of the floor, the difference in the height of its elements. Pick the most suitable method for your foundation, perform repairs, and enjoy a flat, attractive surface!