The boardwalk is the most attractive and qualitative basis, which will serve for many years. Our time of the boardwalk is not entirely to fashionable material. With its choice, people are often inclined to newer, synthetic coatings. The boardwalk as it should be fitted into the interior, if you work well the design of the room. In addition, it is worth noting that the advantage of the floor is its environmental friendliness, strength, practicality when leaving, it does not creak, very warm and easy to repair it easily. Some advantages.
Choosing a wooden floor
It is worth paying attention to the choice of material. The most suitable for the board will be an option from a conifer, such as fir, larch or pine. In this case, the material is durable and resistant to mechanical exposure. It is also necessary to consider in the future than the floor will be covered if the choice falls on the varnish, then it will be necessary to determine the color of wood and its fiber pattern.
The most expensive and sophisticated materials are nuts and a red tree.
When laying the floor, it is necessary to have only dry, non-risen wood, otherwise cracks and other defects are possible when working, which will not have the entire flooring process
Oak in its external and price characteristics refers to the middle category, so it is on it that can be stopped. It is very important not to forget about special treatment with antiseptics of all natural materials so that it does not lead to the formation of rotten or the spread of pests, which will certainly lead to disrepair of sex in a short time.
Article on the topic: Curtains on the balcony with their own hands (photo)
Promstable floors - what it is
Simple words - it is a flooring or tail overlap. It is manufactured as a draft coating over shut-off beams. Such a floor is used mainly during construction, in a garden house, attic, that is, where thermal insulation and noise absorption is not needed. The essence of the technique of the privileged floor - flooring on the beams of boards, which will serve as half a attic.
Installation of the prostinal coating - the case is quite troublesome, but the result will delight for many years with its ecology and reliability
If you want to isolate the room, then layers should be laid in the following sequence:
- Bounded boards;
- Overlapping beams;
- Noise insulation material;
- Promstable floor.
Very important function Intermediate plates plays with laminate equipment. Durability directly depends on the quality of it.
Poland - necessary work
It looks like this process as an alignment of sexual coating by means of a phased removal of the layers using special tools. It is necessary to align the surface, adjacent to the tight boards and eliminate the provisions.
Poland is a laborious work, so this operation is performed by a mechanized method
There are several ways to pointed:
- Handbank;
- Electrolake;
- Parquet and planing machine.
It is worth paying attention to that it is necessary to check the lack of sticking hats of nails, clean from the garbage and make a slight moisturizing surface. You need to remove the layer no more than 1.5-2 mm thick.
Repair of the board: Device and setting
When repairing milking floors, a damaged board and painting is shifted. Most often, after placing the new floor, the boards can dry and swallow to eliminate the like, before painting and coating, the material is sharp and split. Flooring is worth spending a year after the flooring, with the help of wedges, firmly navigating nails.
At the same time, the hats should go deep into the wood by 2-3 mm, be sure to flatten them so that there is no breaking fibers of the material.
When the boards are rich and nailed with each other, fill free gaps with dry material. The replacement board must be wider on a centimeter. There is a step of shifting all the irregularities at the joints. An extensive space is performed at the moment when the old flooring is being prepared for color, or the surface is deformed from drying or wear inhomogeneity.
Article on the topic: Installing the cabinet door do it yourself
One of the advantages of the wooden floor is that the repair of the board can be carried out with their own hands.
Algorithm of movements when using the tool must be in the following directions:
- Along;
- Across;
- Decoration.
The quality of work must be verified by the ruler. Pay attention to the fact that the plinth is nailed directly to the walls, creating a specific frame that protects the floor from the deformation. In concrete or stone walls, in this case, the wooden peasants fit.
Ventilation of such a floor is of particular importance, because it prevents downloading. If the piece of the board is still not succeeded, it can be cut off, replacing it to a new one, which should be located more than two lags. There is a whole ritual in front of the painting itself. It consists of washing the floor with a detergent, surface treatment from the old coating, removal of various garbage and other foreign materials, and in conclusion - primer. As soon as the primer dried, the cracks are filled with a pacle, as for small clicks, they can be putty. Produce a complete putty floor. The final stage serves the grinding of the entire surface.
Alignment of the boardroom
The procedure is very laborious. It is worth considering her responsibly and carefully. First of all, it is necessary to pay attention to the need to strengthen the old boards to lags by self-drawing. This eliminates the creaking and attached stiffness.
To perform such work, you can offer two options.:
- Alignment with a grinding machine.
- Laying chipboard without alignment.
Consider in more detail. In the first case, the process will come out heavy, without certain skills it is unlikely to work, and therefore will have to seek help to professionals. But if the presence of the machine that can go through the corners along the walls of the walls, then try it.
The boarded floor when aligning with a grinding machine will be smooth, but after the expiration of time it will re-need the cyclovka
To avoid this, you can try to lay an extra layer of plywood, leaving the gap that will be closed by a plinth.
In the second case, the floor will be stewed by a plywood or chipboard. In places with a non-smooth surface, a solid material is placed, such as Fiberboard. Stacking should be started from the top point. With the presence of the first sheet, the substrate is placed. Further by analogy. Clauses should be observed from the first point.
Article on the topic: Blinds of fabric with your own hands - Production features
There is a way to use special mixtures as a cyclove, spilling it over the entire surface and distributing the spatula. Work is worth producing at a time. Preparation serves to close all the holes and cleaning from the old paint, the slots can be used. The reinforcing mesh, or fiberglass fabric, pre-attaching it.
Staying of the female (video)
As a material used in interior solutions, the board deserves the highest assessment. This is a very reliable, high-quality and eco-friendly material capable of setting up a certain highlight to the house.Standing Floor Design (photo in the interior)
