The panel parquet is a whole modules or shields that have already caused a pattern in the form of paretopol with a shield parquet is obtained high-quality, and it does not differ from a piece parquet board. Parquet is a wooden floor flooring, parquet species There are several, so, for example, there is a piece parquet, which consists of wooden planks with spikes and grooves, thanks to which the planks form a single design. Such a parquet is rather durable, it is possible to replace different plate plates, and such a material has the wealth of coloring and mosaic.
Existing types of parquet
Another type of parquet is also found, which is called the panel parquet. Its feature is that it is a two-layer, the first layer is the base made of boards or from thick plywood. Parquet planks made of durable wood are attached to this base. Shield parquet, in turn, is divided into several types, depending on the base.
The packer with a frame base has 3 signs:
- Such a coating is a strapping;
- The blockage is connected in the corners with spikes;
- For reliability, thorns compounds are missing glue.
Shield parquet there are several types
Rack panel compound - In this case, the basis of this parquet is replaced with a veneer from 2 sides. The top coating of the palate can be made of parquet slats, from a square planed veneer or from a special plywood fairy tile. Such a parquet is most often used in residential and office premises, but there is another type of parquet, which refers to an elite option, and is called Palace or Art. Such a parquet has many bends, weave, which allows you to create a practical artwork of art.
Article on the topic: How to use ordinary and wicker baskets in the interior (66 photos)
Correct installation of parquet
In order for the parquet to serve for a long time, it is necessary not only to use high-quality material, but also to lay it correctly, and prepare a quality surface. The surface should be perfectly aligned, leveled the surface with self-leveling mixtures. If the surface drops are minimal, then you can use special substrates. After everything is ready, you can take on the installation of parquet.
On the prepared surface:
- Laying of vapor barrier material, for example, polyethylene film;
- It is stacked by plywood, a thickness of at least 10 mm;
- It is necessary to attach to the phaneer to the surface with the help of dowels and screws.
- Parquet boards are installed on the fane, or the piece parquet is stacked or parquet shields.
Parpet laying process
Place the plank, or in a straight line, or diagonally, and begin the best of all from the longest wall of the room. When laying parquet, you need to leave a small gap from the wall to parquet boards.
It is necessary to compensate for the deformation of the floor when fluctuating the temperature.
If the parquet is installed on the wooden floor, it is necessary to pre-repair the repair - replace damaged boards. It is also necessary to align the wooden floor, as well as its strengthening, if necessary, lags, it is best to install a new floor on new lags. Parquet planks or parquet shields are fitted on the wooden floor, just like on concrete, ranging from the long wall. The last row of skid slightly cuts up and inserted into place if steam barrier is made from under the parquet, it must be trimmed. The last element is installed plinth, wooden or modern plastic.
Types of parquet shields
Parquet shields are special parquet planks or facing plates that are firmly attached to the hard base. Typically, such shields have dimensions from 40x40 cm, to 80x80 cm, and the thickness of these shields can reach 4 cm.
Article on the topic: Room design 11 sq m
Typically, parquet shields produce several species:
- Shields parquet stamps Freak1;
- Shields of the brand of fox2;
- Spy brand Freak3.
Parquet shields produce several species
Freak1 is a frame base, the corners of the frames are connected to each other with spikes and glue. Between the bars, which are the frame, the wooden rails are attached, the ends of which are attached in bars with a thickening connection. PS4 is also a frame of wooden bars, and from 2 sides this frame is lined with a special veneer. The bolding veneer is performed so that the parquet shield does not cord. FOSH3 - The basis of such shields consists of Plywood chipboard, plywood, in turn, is lined with a special veneer. Plywood ends are treated with waterproof impregnation.
The facial part of such shields is traditionally performed from different varieties of wood, most often use maple, ash, oak larch and other wood species.
Sometimes the facial coating is performed using modified wood, which in its characteristics is not inferior to natural wood. Such wooden planks are glued on the base using synthetic waterproof compositions. The base (bars and rails) is made from wood of coniferous rocks, as well as from birch and aspen. Parquet shields are stacked on the prepared surface and will be connected to each other with grooves and crest.
High-quality laying of a shield parquet
To accelerate the repair in any room, especially if it has large sizes, it is easier to lay parquet with a panel type. Also, the panel parquet is cheaper at its price than, for example, piece parquet. Most often, people choose for laying floor coverings with a square of a square or a straight type. It also saves material and dispense with a small amount of waste.
When laying data shields there are features and subtleties. The spits are made of different thickness, the carrying capacity of the floor depends on the thickness of the shields, for example, if their thickness is 25 mm, then in this case they should be laid on the basis of the chipboard. It is important before laying to withstand moisture mode and temperature. The room should survive several days with a temperature of at least +10 ° C, and with humidity no more than 60%.
Article on the topic: Warm floor under the carpet: how to make it yourself
When laying a shield parquet, you must comply with technology
If the shields are quite thick, then you can immediately lay on the lags. The distance between the lags should not exceed 40 cm. A wide board can be used as a lag. The joints of the shields should be found in the middle of the lag, due to this, the carriers of the shields increase. Typically, laying shields begins from the center of the room in both directions, while you need to constantly check the parallelism and linear direction and, the more often the check will be made, the better the laying will be performed.
It is important to customize the shields to each other. For pressing shields with each other, you can use the Cyanka or special fittings. It is also between the wall and shields to leave a small gap for the temperature deformation.
Types of Shield Parquet (video)
In conclusion, we add that the varieties of parquet include laminate, which is placed on a special substrate. Other types of parquet are widely used not only in residential premises, but also in public, and in some you can still see the Soviet parquet.Shield Parquet Design (Photo)
