Works on laying this material are quite simple and understandable. Parts of the material are put on the draft floor so that one who has never been engaged in never work can cope with this. But in the process there are some difficulties of its styling, it is complicated by joints, angles, openings, it is necessary to know some rules as stacked material in such places. Laying of laminate in the doorway has its own nuances.
Laminate laying scheme.
Instruments:
- line (metal, wooden), pencil;
- Metal, wooden or rubber hammers;
- The object of the type of blades for installation, drill, manual or electric saw, saw on metal (it is convenient to cut the laminate);
- Bar, they will compact the joints of the panels;
- plugs for fixing gaps;
- Paper made of felt, polyethylene film, adhesive composition (PVA).
In any case, the work is performed by these stages:
- preparation of tools, material;
- the product of measurements, taking into account possible changes in the material;
- preparing door opening;
- cutting material;
- Laying.
Characteristics of the process itself
Laminate structure diagram.
Most often, difficulties occur when laying a laminate near the door, in the doorway, similar places. The first thing to be done in this case is to measure the gap of the floor plane at the door.
For this you need to know some nuances. Its size should be less than 10 mm. It matters because after mounting the material of the door design, the canvas should move freely. If necessary, you can change the height of the door.
Before working with laminate, check whether the basis on which it is fixed under its laying is suitable. The base should be even, humidity conditions suitable (for fiberboard plates). The floor can consist of the above-mentioned plates, they are suitable for mounting, also put on an old coating, seamless base from cement, ceramic tiles, wood base.
Article on the topic: Interesting things for home do it yourself
Laminate laying options.
Carpets Farmers - mobile, soft base, so unsuitable for laying a laminate. If it is, it is completely removed before laying the material. The xylolite floor is also not suitable, since it has a greater residual moisture.
Before work, the basis is carefully prepared. The material must be put on a clean surface, it must be smooth, rack, dry. Small deformations are eliminated, for this there is a lining.
The plane of the draft floor is subject to grinding and spit, if its slope is greater than 3 mm per 1 m. For laying the laminate on the boards, they are necessarily aligned if it cannot be done, then the deformed replace. If the base consists of parquet boards, then the material is placed in the same direction as they.
Laminate is placed on a specially prepared substrate. Polyethylene film is used, it will protect it from moisture and steals to the surface of the base. If the material is placed on the heated base, the film is required.
Laminate laying diagram near doorways.
Additional thermal insulation is provided by plate plates, it will provide good noise insulation. Mounted and noise absorption system, for this is used cardboard with a special relief. It is placed in several layers and bonded by bilateral scotch.
It should be borne in mind that the material after laying has properties to shrink and expand. Walls outstanding over the basis of elements should be with a gap at least 1-1.5 cm per 1 m. While working with the material, plugs are made there, they are removed after the end of the laying.
If the material is used in the form of panels for the room, the dimensions of which are greater than 8x12 m, provide a valuation distance, its size is not less than 1 cm per 1 m. It is free, provides a change in the material sections, the impact of moisture and temperature differences are taken into account.
Mount the plinths only to the wall surface, it is impossible to fix such a coating to the base.
Article on the topic: Avtokrolin - do it yourself
Laying of laminate in the doorway
Laying laminate near the battery.
Manipulations with the material in this and similar places have difficulties. For the work of work independently, it will be easier to make sure that the basis is prepared. Material itself should also meet such requirements. Laminate panels are kept in a dry place.
The laying of laminate under the door can be carried out using several methods, there are three main: perpendicular, parallel to the rays of light, diagonally.
Pre-measure the width of the room and the last strip of material. With a result, no more than 5 cm are cut or saw the reverse material panels, it is necessary that the first stripes coincide with the latest width.
Plinths are not pressed strongly to the floor and fixed only to the wall, otherwise it will violate the ability of the material to change due to external conditions and it will deform, crack. The opening is drawn up with decorative beams, straps, which also have practical functions.
Work in the doorway has nuances and difficulties. First of all, it is necessary to make the box, platband. The location of the thresholds for the transition is significantly at the length of the room more than 12 m, width - 8 m to hide the seam of the joint take the expansion profiles intended for this. They are manufactured and sold in various colors and shades, so it is not possible to choose them. Such decorative and functional elements are attached not to the material, but to the base.
Compensation seam: Features
It is done in the area of the doorway and then hides the lining.
Installation of laminate strips in the opening is performed by a floating method.
Differences Differences of the locks of type "Click" and "Lock".
Only joints are processed by adhesive composition, ultimately, the monolithic single plane comes out, not fastened with the base.
This area is experiencing high loads, clutch strength must be maximum.
There are 3 ways to lay material in openings:
- The door leaf is cut and adjust on the thickness of the laminate laminate.
Article on the topic: Redevelopment of a three-bedroom apartment in a panel house
At the bottom of the box, the contigels are made, panels are inserted into them. This is an easy and easy way, it is necessary to perform it carefully, as you can spoil the door design, if it is expensive, then it is very annoying. For propyl, you can use the hacksaw with small teeth or metal. Two cut down from both sides, they enter the laminate panel and fixed. Duties are made in the doorway, carefully measured them, because there will be no second opportunity. Cut must be neat and slowly so that there are no chipping and cracking, bundle of the box material.
- The second way is to put the laminate before installing the door. This is the optimal option with long-term overhaul when the installation of new doors is planned. First, the material is spilled, and then the door design is mounted.
- The third - eliminates the doors.
The panels are cut, so that when they are installed, they are lightened tightly and missing slots. It is necessary to cut them as precisely as possible, in which case they do not enter the doors, but fit to the place of the door canvase. Here you can not follow the rule that the laminated coating should defend by 5-10 mm from the wall, since it expands or narrows under the action of the medium, but, given the small dimensions of the opening, in this case it will be insignificant.