The washing machine in the bathroom is the necessary thing in the house, because it helps to save time and effort on the washing. For normal operation, it is necessary to connect it correctly to water supply and sewage. You can install a washing machine without a call to a specialist, you just need to get acquainted with some recommendations. If they fully adhere to them, the installation of the washing machine will not take much time. Before installing the technique, you should purchase a siphon, because it acts as a hydraulic shutter.
Purpose
Many people believe that the main purpose of the siphon, which is used to connect the washing machine, is to derive water. But this device is also intended for other purposes:
- Siphon provides the right sewage operation Using a water barrier. This allows you to forget about unpleasant odors in the room where the machine is mounted. Many consumers do not pay attention to this function until the sewage smells penetrate their home. Replacing the siphon will help to cope with the problem.
- The device collects all the fine garbage and parts, which during washing in the system and prevents them from entering the sewage pipes. Siphon allows you to prevent clogging of sewage, because it is quite problematic to perform regular cleaning of the pipes. Sometimes it is simply impossible to use chemicals for cleaning pipes, as the pipe material itself can damage. Some models of washing machines have a separate compartment, which collects all dust, wool and minor items. But if the model does not have this drive, then the main load goes completely to the siphon.
- To facilitate the work of the pump washing machine The flicer hose bends are used.
Views
The presence of a siphon provides a good drainage of water, extends the use of the washing machine and helps to avoid possible problems that occur during sewage storage.The choice of a suitable siphon is quite simple, since only two types of this device are provided on the sanitary equipment market.
Article on the topic: Interior of the apartment for a young family with a child: Furniture arrangements in the rooms (39 photos)
Combined
Use in any room. It allows you to drain the water for the sink, and the additional nozzle ensures the reliable connection of the machine machine to the sewer system.
Separate (external and built)
- Separate siphon Frequently used to connect the washing machine automatic. It can be outdoor or built-in.
- Outdoor siphon It is characterized by small dimensions, but needs more space than the built-in item, which prevents the machine near the wall. Its fastening is carried out to the sewer tube using a sealing ring.
- Built-in siphon Experts are commonly called "boxed", it is necessary for it less space than for outdoor. It is completely hiding into the wall, only the unnoticed nozzle remains. Using the built-in siphon, you can install a washing machine tightly to the wall. Installation of this device is very simple, but only in advance it is necessary to prepare a special recess in the wall. This species is in great demand among buyers, because it carries out a hidden output of water from the machine machine. First, the walls are tiled with tiles, and then the siphon is installed in the recess.
Nuances connecting the washing machine to the plum
Before buying a specific machine model, the machine must first read in the instructions, which water pressure must be for the operation of the product.
If the apartment is on the upper floors, then it is necessary to verify that the height and the accumulative tank can create the desired pressure. On the lower floors, this problem is completely absent.
Sometimes difficulties occur when connecting the machine-machine to the plum due to its location.
There are several ways to connect:
- directly to the bath;
- to the siphon, which is under a sink or washing;
- to sewer pipe.
To connect the machine, the machine directly to the bath is used only hose, as well as the holder on the side of the bath. These fixtures are sold complete with appliances.
To connect the siphon to drain the machine machine to the sink, you must purchase a model with a special nozzle. To connect to the nozzle, the hose from the machine is supplied and fixed by seals.
The last embodiment, which is made to the sewer pipe, is more complex, but also often used.
Article on the topic: New Year's crafts do it yourself (35 photos)
When connecting the machine, the machine to the siphon should pay attention to two nuances:
- The draining must be connected at a height of about 60 cm to reduce the load on the functioning of the pump.
- It is not recommended to build a plum hose so as not to create additional load on the pumping system. If there is not enough length, you can solve this problem using an additional sewer tube, the diameter of which will be only 3.2 cm. First, the pump will push water along the hose, and then it will already arbitrarily flow over the extra tube. If you decide to lengthen the hose, then definitely secure it at the necessary height, and do not throw it on the floor, and make the desired angle for a good water flow.
Installation steps
Connection to sewer pipes occurs in several steps and depends on the material of the pipes.
If the sewage consists of cast iron pipes, it is necessary:
- Remove the old siphon. Make fastening a special rubber adapter to the pipe, which will allow you to connect cast iron with plastic.
- Use a special plastic adapter, which has a form of a slanting tearing with a diameter of 5 cm.
- Insert the rubber adapter, the dimensions of which are 5x2.4 cm, and install the hose for drain.
If plastic pipes are used to sewage in the house, the connection process is greatly simplified. It is only necessary to build a tee, and then all actions are performed as when mounting the machine machine to cast iron pipes.
What should be considered in the installation process, additional details
When buying a washing machine, there is already a hose, the length of which is usually 3 m, but sometimes 5 m. If the hose lengths are not enough, it can be lengthened, but not more than 3 m, and be sure to use a polypropylene tube with a diameter 2 cm for connecting. It is better not to build up, but buy a new hose of the required length. A special pump, which is responsible for draining water from a washing machine, one of the most expensive parts in the washing machine, so it makes sense to care. The longer the hose, the greater the load on the pump, so its service life decreases. And also in the extended hose increases the number of blockages in the location of the narrowing.
Article on the topic: Rules for mounting drywall on the ceilings with illumination
When installing a washing machine, you must consider two more additional details:
- The shut-off valve is responsible for overlapping water so that it does not go back to the machine. Usually, the washing machines come complete with this part, but if there is no valve, it must be bought. The importance of an ordinary valve is that after its overlap you can use water for other needs. Without it, there is a great possibility of flooding the room.
- Self-tapping valve Does not overlap water. It is worth installing, only in cases where other units are connected to the riser, using water and capable of causing pressure drops in the water supply system.
Features of connecting to the sink
To connect the machine, the machine to wash the hose must be located at an altitude of about 60 cm to prevent the likelihood of arbitrary water leakage back into the car.
It is necessary to purchase a tee, the form of which resembles the letter "y", then a hose from technical equipment is installed in one hole, and on the second for the sink. Do not forget to use the seal when connecting the machine machine to the teach. Only the correct connection ensures excellent washing without interruptions.
Subtleties of selection of siphons
A small variety of siphones greatly simplifies the process of choosing a product, but still, special attention should be paid for some points:
- Country producer directly affects the quality of the product.
- The material of the manufacture of the siphon, and the conditions in the room in which the washing machine will be installed.
- If the machine will be installed in the kitchen along with other equipment that consumes water, such as dishwasher or coffee machine, then the siphon must have several conclusions.
- The system of the siphon should be solid, without cracks or other defects. Special attention should be paid to the thread on all connections. All rubber pads must be one size with pipes.
- The technical parameters of the siphon must be determining when choosing a siphon. Wear-resistant material guarantees a long life, as well as the correct operation of the entire system. The best materials for the manufacture of the siphon are stainless steel or polyethylene.
