Repair of pallets of shower cabins is an event that can be performed independently. Despite the fact that the plumbing is made with a sufficient margin of strength, even she often breaks. A cracked pallet makes the process of washing impossible, which creates significant discomfort to people.
The easiest solution is to replace the damaged fragment. However, it is quite expensive and long. As a rule, only experienced specialists can accomplish such work. It is much more profitable and faster to repair the pallet of the shower cabin with their own hands. For this, it is enough for a set of household tools that are in each storage room. To know how to repair a cracked bowl, it is necessary to focus on the nature of the origin of this unpleasant phenomenon.
Causes of damage to pallets
Today, there are shower cabins manufactured in domestic enterprises in Europe and Asia. Almost all manufacturers give a long-term guarantee for their products. To avoid buying a poor-quality fake, you need to check the availability of the seller of the certificate and the corresponding marking on all parts of the shower cabin. But even the most reliable documents will not be removed from the damage.
These products are cracking for such reasons:
- Manufacturing defect. Unfortunately, this is a fairly common phenomenon with which you have to deal with consumers. The marriage is the presence of voids in the array of the sink, a skew or a violation of its geometry. In some cases, in violation of production technology, the strength of the material is significantly inferior to the declared parameters. If such a product is on warranty and there is a check, then it is better to go to the store or replace to another similar product.
- Errors made in the installation process. The most common overseas that inexperienced masters allow is the installation of a shower cabin on an uneven surface. This leads to an uneven distribution of external load and creating internal stress in the material. Another error is excessively strong or insufficient tightening of fixing reinforcement.
- Violation of the rules of operation of the shower cabin. With these products you need to contact very carefully. Cracks can be formed due to excessive pressure on the sink, when there are several people on it. There are damage after falling on the pallet of heavy and acute items.
Article on the topic: How to insulate the foundation extruded expanded polystyrene - technology
So, cracked the pallet of the shower cabin, what to do? Having understood with the cause of the appearance of cracks in the container, it is necessary to carefully prepare for repair work.
Tools and materials
Start repairing acrylic pallets of shower cabins immediately after damage is detected. Otherwise, the crack will begin to expand, which can lead to the split of the whole bowl. In such cases, no repair will not help. When finding a crack, you need to immediately stop the operation of the shower. Capacity needs to be thoroughly wash and degrease. After that, you should leave the bathroom on the ventilation. Work can be carried out only in the absence of moisture and dampness.
To repair the acrylic pallet of the shower, they will need tools and materials:
- sharp knife;
- scissors;
- building level;
- wrench;
- screwdriver;
- epoxy adhesive;
- fiberglass;
- acrylic paint;
- sandpaper;
- paint brush;
- ethanol;
- dentifrice;
- rag;
- respirator;
- Protective glasses and gloves.
Pallet repair tools
Before starting work, it is advisable to remove from the premises of children and pets. The reagents used in the repair are toxic and have a sharp smell.
How to repair the pallet
During the operation of shower cabins, small and deep cracks, chips and holes can be formed in their bowls. In each case, a separate approach to troubleshooting is required. Repair must be carried out so as not to redo the work done after a short period of time. Consider a list of activities that are conducted in the elimination of various kinds of damage in the shower cup.
Seeling small cracks
This is the most frequent malfunction that occurs on the pallets of shower cabins. If you close the crack right away, then the destruction of the bowl will end.
Small crack on the pallet
Such a job must be performed in the following sequence:
- Sharp knife to clear the edges of the crack. It is necessary to scrape acrylic until the scratch walls do the original color.
- Remove the resulting dust using a vacuum cleaner. Water treated with ethyl alcohol.
- Snap glasses, respirator and gloves. Prepare for use acrylic paint.
- With the help of the brush, apply acrylic paint on the scratch. Depending on its depth, repeat the procedure several times until the paint level exceeds the bottom of the bowl.
- After the paint is completely dry, align all the influxs using sandpaper, gradually reducing its graininess.
The final stage of repair is polished. To avoid unnecessary costs, you can use a mixture of toothpaste and dental powder. With this composition, you can bring the surface of the bowl to the mirror gloss.
Repair of deep cracks
If damage has a greater depth, it can quickly destroy the whole cup, rapidly increasing in size. If the product burst throughout the volume, then staining here can not do. It is necessary to make more effective measures.
Article on the topic: What to do from glass bottles: vase, lamp, candlestick, shelf and not only
Deep crack
That's what you need to do:
- Remove the bowl. To do this, it will be necessary to overlap water and disconnect all communications from the shower. If the bolts and nuts rusted, they must be treated with silicone lubricant. This will greatly facilitate the process of unscrewing them.
Dismantling pallet
- Clean the pallet on both sides of the dirt, lime plating and mold. Thoroughly wash it with soapy, rinse with clean water and wipe dry.
- Expand the slit, removing from its walls of the raid, dirt and continuity, which broke up to the fibers. If there is such a need, then you need to make a pass-through hole.
- Clean the sandpaper the bottom and work part of the capacity. Treat the surface with a reserve of 5 cm from all sides. Remove dust, degreased acryl with medical alcohol.
- Mix the epoxy glue, lubricate them the opposite side of the bowl, focusing on the place-stripped place. Tightly press the epoxy glue of the usual gauze or fiberglass. The process repeat 3-4 times depending on the size of the gap.
- From the front side, fill with epoxy glue. Walk out the day until it completely freezes. Treat the glue with emery paper, to cover it with several layers of acrylic paint.
- Perform polishing and polishing facial surface. Install the product in place, attach communications, check the performance of the drain.
After such a repair, the pallet will become stronger than at the time of sale. The service life will increase significantly.
Seal through holes
Similar trouble can happen when heavy construction tools or a massive watering can fall into the bowl. Despite the fact that the problem seems intractable, it is possible to eliminate it easily, using all the same household tools and infringement materials.
Shower tray
Processing blanks must be carried out in such a sequence:
- Remove the container from the base. It is necessary to do it very carefully so as not to damage its edges and not split. Clear the bowl from all types of pollution, wash and dry.
- Clear the edges of the samples from all contaminants. Remove protruding fibers and fragmented fragments. Declaring acryl with medical alcohol.
- To impose a solid patch on the inner surface of the pallet, which is necessary for fixing the filler and its seals. This uses epoxy glue and several layers of any durable material. It is best to use fiberglass, which is intended for such purposes.
- Prepare epoxy glue according to the supplied instructions. Pour it into the hole so that he slightly opposed the surface of the bottom of the pallet. To avoid the formation of emptiness in the epoxy filler, the resin must be wrapped in several places.
- Put one more patch over with glue holes. This uses epoxy glue and thin fiberglass. Skip after drying to paint acrylic paint.
Such a repair is advisable only when the hole diameter does not exceed 10 cm. If it is more or slightly, it is impossible to eliminate such a breakdown. The structure of the pallet loses the integrity and strength.
Prevention of damage to the pallet
Problems with a bowl of the shower cabin can be easily avoided if you follow all the rules of operation of this product. First of all, it is necessary to accurately fulfill all the requirements for installing the pallet. When making water procedures, you do not need to jump on the sink and invite a companion with you. It should be very careful to handle a watering can made from metal and having sharp edges. When dropping from the height, the watering can scratch, split the bowl or break through it through.
Cleaning acrylic from dirt can be only soap or alcohol solutions. Acetone and acid can dissolve and damage this material. When installing the shower cabin, it can be strengthened, which will protect it from faults and cracks. For this, bricks are laid under the bowl, and the free space is placed by mounting foam or filled with silicone.
The pallet should be regularly inspecting for damage detection. When they identify repair, it is necessary to be made immediately. So the dial service will be almost unlimited.
Video instruction
Article on the topic: how to put the wall with your own hands