The method of dismantling vinyl wallpaper depends on the structure of the wallpaper themselves, as well as from the characteristics of the wallpaper - this is one of the most popular types of decorative wall covering today. Beautiful, durable, durable, modern - for all this loves wallpaper from Vinyl. Before you tell how it is sad to tear them away from the wall, it is worth talking a little about what these wallpaper are generally.
Vinyl wallpaper: specifications
This is a two-layer material, the upper layer and there is a vinyl, polyvinyl chloride, if you are accurate. And the bottom layer is either phlizelin or paper. Naturally, the paper base will not be as strong as a fliseline, and for many, when the wallpaper is selected, it is crucial.
Vinyl wallpapers may have a paper base or phliselin
The appearance and features of the care depends on the type of vinyl, and from its finishing.
You can buy vinyl wallpapers for painting, which are a material based material with a certain relief that you can transform yourself by choosing a suitable paint.
Such a coating is quite heavy, so the usual cheap wallpaper glue is not suitable - you need special glue for vinyl wallpaper. Only wall flashes, we do not need to smear the canvas.
Views and characteristics of vinyl wallpaper (video review)
How to remove vinyl wallpapers: the first way
With vinyl wallpapers, as simple as with paper, will not work. Paper only wetted with water, and quickly can be kept off. So vinyl thicker, you will have to act differently.
Article on the topic: Simple tricks of removal of stains from anything
Remove the vinyl coating in three stages:
- Perforation . Water should dissolve the adhesive layer so that the wallpaper is easier to fall behind. But through the vinyl layer, the water will not be so easy. Therefore, take a special roller with spikes or an object called a wallpaper tiger. The wall surface will not be deformed, and water will fall inside.
- Moisturizing. Now in the perforated coating you need to "let the water" need. It is possible to make vinyl just a warm water, and it is possible and water with a special added liquid. Such a liquid is sold in the wallpaper store, and it is necessary in order to faster dissolve the adhesive layer.
- Remove coat . When the coating is well soaked in moisture, you can remove it. Just do not force the events, and do not overdo it with water. Wet walls you do not need, and the wet gender too. The coating is removed from the bottom up, and the remaining pieces are usually removed by the spatula. Spatula is better to take a wooden.
You can wasting the surface of the wallpaper using a brush, a darous or fur roller, a sprayer or a wet sponge. You can also use a sponge roller
There is one more trick - when the facial part of the wallpaper is already destroyed, they can be treated with steam, while either a steam iron or a steam generator is used. After that, you can remove the coating with a spatula. Couple helps ravel the wallpaper glue, and to spare them from the wall will be easy.
Effective way to remove washable wallpaper from the wall (video)
How to remove vinyl coating from the wall: the second way
This method is applied if you remove the old vinyl wallpaper from the walls so simply it does not work. In this case, you take the same warm water, the same special means for penetration in the adhesive layer, and the wallpaper itself. Of course, quite a bit.
You process the wall, and it should be soaked with a mixture of about three hours. Then you can remove the coating - it will be removed by large stripes, without any breaks. That is, the coating do not have to rip off.
Article on the topic: Why do you need a grease trap under the sink?
If the case is complex, you may have to use the following techniques:
- A sharp spatula will help scrape the remnants of wallpaper;
- You can wear the coating with a drill with a nozzle that looks like a metal brush;
- Another option is a grinding machine with a coarse-grained skin.
Usually, difficult cases occur if non-fit adhesive were used to stick vinyl wallpaper
Third way to remove wallpaper
You can delete them in layers. Needle roller handle the wall, that is, make the same perforation. After that, the second layer wet the water into which you can add such a composition: air conditioning for linen + vinegar + ammonia alcohol. Already in twenty minutes, the coating can be deleted.This principle repeats the first, only the composition of the aqueous solution is changed, which helps to dissolve the adhesive layer.
By the way, if you remove the coating with a spatula, make sure that there is no layer of plaster. The spatula deforms him, and you will add extra work.
How to remove vinyl wallpaper from the wall: Four way (video)
How to remove vinyl coating with plasterboard wall
This is really a problem, because it is possible to damage the top layer of plasterboard. Since the plasterboard is deformed by moisture, overdo it with water - and the deformation of the GLC is provided.
Therefore, choose a means for removing wallpaper from the wall, and remove the old coating with a spatula. If the vinyl is pasted on modern glue, there will be no problems, but if you used PVA glue, then most likely, the plasterboard will have to be changed.
If the wallpaper is hardly separated from the GLC surface, you can use the ferry. When spraying a pair, you should act carefully: do not hold the device for a long time in one place
On the forums you can meet the advisers who assure that if you use liquid for washing dishes, vinyl can be perfectly handled. But experts recommend this not to do - a high probability that the layer of putty or plaster will deteriorate. Sometimes powder remains on the surface of the walls, and it prevents further coupling with a new coating.
Article on the topic: Curtains for cafes and restaurants: Secrets of the right choice
Remove the wallpaper with GLC surface (video MK)
Before the new layer of wallpaper appears on the wall, it is necessary to clean it thoroughly, Ideally remove old. Methods to remove coverage a lot, focus on the one that does not require great preparation. If you do not have a needle roller, and there is a grinding, use it. If you can not find a special fluid, make the desired solution yourself.
Successes!