Self-adhesive films for the bathroom: choose and glue

Sometimes there is not enough time and means to carry out full repair, but I want to update the interior somehow. In this case, the optimal choice will be a cosmetic restoration of the room. After all, today's assortment of finishing materials allows you to choose an inexpensive coating that will serve you for a while. So, the self-adhesive film for the bathroom will help you transform the bathroom.

Properties and features of the material

Such a coating is quite suitable for bathrooms, since it is moisture-resistant and withstands the temperature rise of up to 80 degrees. In addition, the variety of decoration of these surfaces will allow you to implement any idea in design. The positive characteristics of such materials, first of all, should be attributed to the low cost, accessible to each owner. In addition, the walls or furniture will not make much difficulty and will not take much time. At the same time, you can always combine several different variants of textures or shades. Not to mention the fact that you can apply the film on any basis of all known materials. It is equally well kept on glass and wooden surfaces, plaster and drywall structures, as well as on metal and ceramic coatings.

Self-adhesive films for the bathroom: choose and glue

With the help of a self-adhesive film, you can easily update the interior of the bathroom.

Despite the obvious advantages, some owners still doubt whether it is possible to glue a self-adhesive film in the bathroom, because in addition to the advantages, it has some disadvantages. A dense hydrophobic surface completely overlaps air access to the wall, which can cause fungus under it. You can avoid this, equipping the room with good ventilation and reducing the possibility of moisture in the air to a minimum. In addition, such a coating is not calculated for long-term operation. The average life of the film in the bathroom comes to three years. You can accumulate with this material only perfectly smooth surface. Such a property will become another negative characteristic of vinyl, as it will require preliminary preparation of walls.

Sticker material can be placed only on a pre-aligned surface.

As far as this coating is suitable for the bathroom, each decides for itself, given those or other factors, as well as the individual features of the bathroom.

Varieties of decor

Self-adhesive film for walls in the bathroom enters the sale of rolls. The width of each of them varies from forty-five centimeters to one and a half meters. You can buy it with a piece of size you need. In this case, the length of branches reaches 15 m.

Article on the topic: Ceiling from GLK in two levels

The special value of such a decor is the variety of colors, as well as imitation of all sorts of textures. In addition, it is possible to purchase a film with a pattern or an ornament applied to it. Specials, imitating tiles or various wood varieties use special demand. There may also be some interest materials performed under metal or mirror coatings.

On sale you can find films of any shade and texture

There is always a choice between the glossy or matte surface of the film. In addition, materials with reflective effect and three-dimensional coatings, creating optical illusions are presented. In some cases, a translucent or matted film will be appropriate. There are variations of this material that fully imitating stained glass equipment. In short, with the help of several different types of vinyl surface, you can change the interior of the bathroom beyond recognition.

Variants of pasting bathrooms

Of course, you can use the film instead of wallpaper and completely worst it all the room. However, such a decision will not be the most aesthetic option, and it will require quite a lot of time on its implementation. It will be much better to use a fragmentary material to highlight various functional zones or hide unsightly elements of the bathroom. With the help of such a coating, you can be interested in to beat the unsuccessful geometry of the bathroom or add a bright accent to the interior.

Stained glass film transforms the bathroom and will provide the necessary level of privacy

If there is a source of natural light in the bathroom, it can be saved with a stained glass or tinting film. By this, you will make a highlight in the design of the room and provide its privacy. Another option for decorating is a masking of open communications. In some cases, it is possible to achieve an incredible effect, for example, cautious one wall of a small bathroom bathroom with a 3D effect. Thus, you will achieve a visual enlargement of the bathroom.

Another way to use the film is restoration of door canvases or furniture facades. However, one should not forget about the sense of measure and taste when interior design. Too much of the salabed surfaces often looks ridiculous.

What will be required for work

Before placing the bath with self-adhesive film, it will be useful to pre-prepare the surface and stock the necessary tools. As mentioned above, applying such a coating is possible only on a dry, clean and smooth surface. First of all, eliminate the defects of the black wall covering. To accomplish such a task, you will have to sharpen and cubs them. For these purposes, the substance based on acrylic. When blowing communications from metal, they should be cleaned of rust and degrease. Glass or wooden coatings are enough to rub the usual alcohol to remove dust and fatty film from them.

Article on the topic: Laying tiles diagonally on the floor: how to put and put, video rhombus, floor marking, photo layout

For successful salary of any surface you will need a simple set of tools.

For better adhesion of self-adhesive vinyl and metal or glass elements, it is better to moisten the latter directly before pasting.

A rather important nuance will be the workpiece of the necessary tools for work. You can usually limit the following list:

pencil and roulette;
Metal ruler;
scissors and a sharp knife;
Special spatula - Raquel;
industrial dryer.

Of course, the acquisition of the last tool will be much more expensive than the cost of the film itself. Therefore, you can either rent it, or take advantage of the usual household appliance included at maximum power.

Dry surface mounting process

You should start with markup and cutting items you need. To prepare one-photon pieces, it is advisable to use the involve side of the film, with a grid applied to it. So, you can easily transfer any shape or silhouette to the cells. Rectangular items better cut with a ruler and knife. If the configuration of the element provides curvilinear cutting, first cut the rectangle with the knife of the desired size, and then cut the figure with scissors.

If a film is selected with a pattern or simulation of a modular image, cut such parts better from the face of the facial surface.

Prepare the necessary pieces, you can get to pasting. It must be said that usually on the wrong side of the product manufacturers indicate detailed instructions for the use of material. You need to spare the corner of the protective layer. Next, carefully attach it to the surface. Smooth movements arrange it towards the edges.

Apply a film with a dry method is not as simple as it seems

Gradually, remove the involving part, along the way, smoothing the surface of the rocket. This is a rather complicated process, so do not hurry. It is important to completely eliminate the emergence of the elevations of the film or entering it.

If you allowed the oversight and a fold was formed on the surface, remove the film with a sharp movement and step it over. The emerging bubbles can be pounded with a sharp object, and then thoroughly smooth out this section and warm it with a hairdryer.

Special attention is paid to the joints of the two parts and pasting the corners. It is impractical to stick one element on another at the place of their articulation. The rectangular whisk of two walls is appropriate to salae with one piece. In this case, the extra material is cut at an angle of 45 degrees and bend. If you make up a rounded angle, then just warm the part with a hairdryer before gluing it.

Method of sticking decor on a wet plane

In this way, it is applied to glass and smooth metal bases. Sometimes it is appropriate to use it and with the surrounding furniture facades from laminated wood plates. The process of cutting here passes the same as in the first case. However, the installation of the material is slightly different. You should abundantly moisten the surface with soapy solution. After, completely remove the outline protective layer from the details and attach it to the plane. Role element using a spatula or a piece of plastic wrapped in felt. Try to do it carefully not to damage and not minimize the decor. Running the film is needed from its center, gradually driving the excess fluid to the edges.

Article on the topic: Technology of monolithic framework of houses: pros and cons

Care rules

Of course, the self-adhesive film for the bathroom, the photo of the samples of the launches of which you can see in the gallery, has a not too long service life. However, with timely and correct care and careful handling, you can extend it for a while.

To care for the sealed surface is completely simple

Remove dust and contamination from such a surface with a wet soft sponge. It is not necessary to wipe such a decor too often. It is enough to do it once a week.

Persistent contamination can be washed off by the usual alcohol-containing substance. However, the aggressive chemical agents and abrasive sponges should not be used for this purpose.

Also do not try to remove stains with solvents or gasoline. Such fluids may damage the integrity of the coating or spoil its color.

You can change this decor when you want

In a word, the vinyl decor will become an indispensable material if you need to quickly update the interior of the bathroom. Its democratic cost is available to many, and the diversity of the palette will allow to implement the most incredible design ideas. The briefness of this coating will also be an advantage as you can change the design and style of the bathroom with the first need.