Cleaned for walls in the bathroom: Photo Examples

The decoration of the walls of the bathrooms must be performed by the appropriate materials. Since the elevated humidity in these premises will quickly lead to the appearance of mold, and the beautiful design after repair will be spoiled. The most popular way to finish for the bathroom is a tile. Nevertheless, this is not the only moisture-repellent material that is suitable for the walls of the bathroom.

Film decoration of walls

In Soviet times, when the shortage of building and finishing materials did not allow many owners to embody interesting creative ideas in the arrangement of apartments, instead of ceramic tiles in the bathroom, self-adhesive films were used. Of course, earlier, even the selection of adhesives for internal facing works was not so big. We had to be content with what could be found on sale. Today everything has changed. Manufacturers offer a variety of options for adhesive "Dressing" for walls for every taste and wallet.

Cleaned for walls in the bathroom: Photo Examples

Assortment of self-adhesive film

Of course, such material cannot be called high quality. From the effects of steam and water, the film quickly loses its original appearance. Paints are erased on it.

Nevertheless, when compliance with all technologies of the surface, it is possible to obtain quite stable and reliable coating. The walls in the bathroom must be thoroughly prepared, remove the old finish, process to.

Tweeting for walls in the bathroom, photo of which and examples of decoration can be found in our site, is a web with a special waterproofing coating. This composition ensures reliable protection of the walls of the room from moisture. Sometimes the material is additionally glorified by foam rubber.

Selection of alert for lining of the walls of the bathroom

Dignity and disadvantages of material

This type of finishing allocate many advantages. One of them is easy editing. This cladding can be changed pretty quickly if the old glue in the bathroom dilapidated.

Such material is presented in a large assortment. Today you can buy films of any color, with different ornaments and patterns. This allows you to choose a finish for any design and style scholars.

Family Bathroom Bathroom Casting Significantly Family Budget Significantly. It is an inexpensive material that is not afraid of the impact of moisture. Consequently, dampness and mold will appear in the bathroom.

This type of finish can be used for other elements of the interior. For example, you can decorate the self-adhesive film facade of the old cabinet, the wall area over the sink in the kitchen. In addition to water-repellent properties, such material is able to withstand significant temperature differences.

Article on the topic: How to securely mount bales to the floor and steps

Release the film without a substrate, based on fabric or paper, foamed or embossed.

Kleenka with a substrate

At the same time, the tile of the bathroom, the photo of the design of which in our gallery will help you to make the right choice, has some disadvantages. Before plating the walls with a film from polyvinyl chloride, a facing surface must be perfectly smoothed. Only in this case the glue will fall smoothly and last long. It is necessary to remove all the irregularities and flaw covers, carefully shuffled the wall.

Wall plastered bathroom

In general, the adhesive finish is suitable for almost any reason. It can be applied on glass, wood, phaneur, metal, mirror, gypsum surfaces and even on the tile.

If the glue into the bathroom on the walls is chosen by you as a finishing material, it should be used before repairing the necessary tools. You will need:

Special cutter to prepare the film filth;
pencil or ballpoint pen to apply markup;
measuring roulette or ruler;
Fen (household or industrial); scissors;
felt spatula or rocket which allow you to smooth facing material.

Hair dryer when applying a self-adhesive film is needed to treat surfaces, angles and joints with warm air. They also need to warm the places of the puncture of air bubbles that may appear during the attachment of the tower.

Studying technology

First you need to prepare the required amount of film. Calculation is carried out after removing all measurements.

Determining the length, height and width of the walls, all obtained values multiply and calculate the square of the treated surface. In accordance with the result obtained and buy the desired method of adhesive. It should take into account allowances for material with a pattern. In this case, it is better to purchase more material, because during the salary you will need to combine images.

Belt in the interior of the bathroom

Start work always with the dismantling of the old coating. Remove the rest of the paint and blots from the walls, remove the plaster. After that, the surface is aligned with a spheolder, and when it dries, thoroughly ground.

Many are interested, than to glue the glue to the wall in the bathroom. For such a material, the types of "PVA" or "Bustylate" are usually used. They are easy to prepare, following the instructions on the package. After that, the composition must be left for a while for swelling.

Glue "PVA" or "Bustylate" are suitable for film without base or with a fabric substrate. When finished with a paper-based adhesive, a special adhesive mixture for vinyl wallpaper is also used. It is advisable to pay attention to the date of production of glue. The composition must be fresh.

Article on the topic: Lilac wallpapers: for walls in the interior, photo, colors, with what are combined, tones, pale lilac with flowers, what color sofa is suitable, video

Glue "Bustilat" for film finishing walls

As soon as the glue for the cakes is imaginable, you can directly start the walls of the walls. The principle of operation is very similar to the bolding wallpaper. The mixture is applied to the cloth with a dense layer. It is necessary to wash all sections with glue well, including angles. Otherwise, when fixing the films on the wall, air bubbles will form.

Washing film of different materials

The self-adhesive film is suitable for decoration of wood frames, wall panels. Before salaling, it is necessary to clean the surface well, remove the old coating, dirt and dust. The surface should be degreed. To do this, you can use water with any detergent. It is advisable to try to align the wall as much as possible, stick all the protrusions and deepening, otherwise all these flaws will be noticeable under the glue.

Preparation of walls before carrying out

Many owners stick the film directly to the tile facing. Today you can find even such an adhesive material that is specifically designed for fastening on ceramic tiles. It is very easy to apply such a coating: the linke is wetted with water, and then pressed against the wall and carefully smoothed. It holds such a durable film finish for a long time.

If the fleet of furniture is groised, too, it usually does not arise any difficulties. The glue rolls smoothly on the wooden surfaces covered with varnish. If on the coating there are irregularities or pores, such a plane is advisable to pre-align primer.

Experienced masters recommend using primer on an acrylic basis. It enhances the grip of the material with the base surface.

As a rule, on the involving side of the self-adhesive film already there is an applied markup in the form of squares. You can additionally draw lines of cuts with a pencil. This will allow to obtain more flat fragments of the material. It is convenient to use a roulette and mounting knife. It is necessary to take into account the allowance of 2.5 cm, but at the same time monitor the combination of the drawing on the glue. When working with a patterned film, it is advisable to cut the cloth from the front side.

Cleaned with pattern

Many prefer for the salable of the walls of the baths of the linen with imitation of the tile. To prepare the segments of the material, you can use any side of the canvas, and then it is enough to simply combine the pattern on the wall.

For waterfall of metal or glass, the base is required to be wedged with water. To fix the slopes on the walls with the blame, it is necessary to cover the surface with glue with the brush. If you do not apply the glue composition on the wall, the film can be subsequently separated from the base along with the plaster. It is better to deceive glue as the wall itself and the adhesive film. After the glooming, the liner smoothes marley.

Article on the topic: Knitted things in the decoration of the apartment interior

Moisturizing the canvas before mounting on the wall

The room is usually started from the corner and gradually move towards the window. The cocned film is placed on the surface, starting on top. In the process of work, you need to follow the combination of the pattern. The canvas stroke the roller or a piece of fabric. It is important to prevent the appearance of air bubbles.

In order for the canvas not to disperse, it is better to stick them a little cleaner. At the joints you need to not forget to miss the film with glue and thoroughly smoothing it with a roller . Excess the adhesive mixture must be carefully removed with a clean cloth, not leaving the stains.

On the seams fix thin stripes from paper or old wallpaper covered with glue. When paper dries, it is slightly moistened and removed from the walls of the walls.

Useful recommendations

Uniform glue application avoids air from entering the canvas. However, even if small bubbles remain, such flaws are easy to fix. These sites need to be carefully clothed with a blade, releasing air, and after smooth. Before falling the walls, it is recommended to process with a primer or a mixture of glue and water.

Pankeeper work indoors

At the top edge of the film under the ceiling, a decorative "border" can be fixed in the form of special paper tapes or cant for wallpaper. You only need to choose the appropriate edging in advance.

Material care

The tower is very unpretentious in the care of the facing. As it is contaminated, it is simply purified by water with any detergent. Some stains are hard to drop. In such cases, alcohol-containing formulations or ordinary vodka can be used.

It is undesirable to wash their rigid abrasives for washing films. They can damage the canvas or erase the pattern from it.

The teller won the love of buyers thanks to the economy and simplicity of installation. Such a coating is easy to cross or replace individual sections. It does not require much care and completely waterproof. With the help of the film you can quickly and without effort to change the bored bathroom design.

In addition, the choice of such materials is presented very widely. It provides the owners the opportunity to carry out any creative ideas during the repair of the bathroom.