Smell from sewage in the bathroom: eliminate the cause

Sometimes the owners of residential premises face the problem of smell of sewage. Ordinary sprays and high-quality cleaning do not help to cope with this problem. The smell still appears through a very short time.

So what is the reason for the appearance of an unpleasant smell from the sewage, why this problem usually affects private houses and how to remove the smell of sewage in the bathroom?

Why unpleasant smell appear in the house

One of the most common reasons for the appearance of the smell in the sewage, which make the stay in the room not so comfortable, are:

The sewer pipe that was initially mounted incorrectly.
The sewer tube was proud and cracks and leaks appeared in it.
The project did not provide for the watertake or it failed.
The pipe clogged and the zoom prevents the passage of water, the residues of food rotate and multipressive bacteria.
Fault or poorly operating ventilation, not cope with humidity. The air becomes stale, the mold appears in the room.

An ill-conceived sewage system is the biggest and heavy error.

Smell from sewage in the bathroom: eliminate the cause

How to get rid of smell in sewage

If low-quality pipes and bad connections were used during installation, they could very quickly come into disrepair. For example, cracked or holes appeared on them. If the places of pipe connections were poorly read or turned out to be weak, the unpleasant smell is guaranteed.

Another error is the wrong detection of the corner of the pipe, as a result of which dirty wastewater can be caught, shine, and unpleasant smells overlook the drain hole outward.

Alone to correct the problems with the sewer is very difficult, it will require a lot of time, effort and costs. We will have to disassemble the sewage in the whole house, re-lay pipes. A more correct decision will be the challenge of the team of professionals who will work quickly, efficiently and most cleanly, and will also give guarantees to their work.

Climbing cracks

If at the moment the overhaul of the faulty sewage or water supply is not possible, and the damage itself is insignificant, for example, one or two cracks were found in the pipe, then you can temporarily eliminate the problem with your own hands. Naturally, this solution is short-term and soon to the question will have to return again, and the pipe will need to be replaced to eliminate the root cause. To add tightness of the pipe, you will need only two clamps of the required diameter and a piece of rubber. Rubber can be taken from the old automotive tire. To do this, cut a piece of the appropriate size so that the pipe can be tightly wrap. The patch must be imposed in such a way that it overlaps the crack, then consolidate it with clamps on both sides. Instead of clamps, you can also use construction ties. This decision is enough for several months, then the smell of their sewage will return again.

Article on the topic: how to remove the lock with the interior door without calling the wizard

How to get rid of smell in pipes

If the crack was formed in the sewer tube, which comes from the toilet, then the actions algorithm will be different. To do this, you will need:

Water.
Cement.
Marley or ordinary medical bandage.
Capacity for stirring.
Latex gloves.

Before starting repairs, it is necessary to make sure that no one will use the toilet to be used for 12-24 hours, depending on the rate of drying of cement, otherwise the result of the work will last long.

For a start in the prepared capacity, it is necessary to dilute the cement with water in the ratio of 1:10. Then, sliced bandage or gauze will need to soak in cement mortar and wrap around the pipe with several layers. The outer layer should be almost dry, but should not be lagging behind the entire patchwork.

Next reason is possible leaks. Water leaks and suggested. Detect them hard, as often access to the pipes is closed. To avoid a similar problem, there are several rules:

Always leave access to the pipes;
do not use many compounds, the smaller the joints, the less likely the appearance of the leakage;
Use only high-quality pipes and fittings.

Get rid of smell in sewage

However, no one is insured against errors, so the problem can still arise and then it will have to solve it. If a plumbing is made of plastic pipes in the house, then the problem is solved once or twice. It is enough just to replace the rubber gasket or seal. To be confident as a result, it is worth walking on top of a special building sealant.

A completely different situation, if the pipes turned out to be cast iron. Here only will help the cocoon of gauze and cement, which was mentioned above. Cement allows you to climb the holes and cracks in the pipe, and the multi-layer march makes this patch quite strong.

If siphon broke

Siphon or, as it is also called, the waterproofing, he is a hydraulic shutter, was invented so that the smells from the sewerage do not penetrate the apartment, including from the total that in apartment buildings, therefore, the smell of sewage in the apartment appears with the non-functioning siphon. The design of the siphon allows two environments, clean and sewer, not to touch with each other, so with a good siphon, the penetration of smells into the room is excluded. So what is the cause of the fault of the siphon and how to get rid of the smell of sewage in the bathroom:

The siphon is connected incorrectly. In this case, the gasket is quickly coming into disrepair and the smell of sewage in the bathroom appears.
Incorrect form of siphon. For example, if it is installed under the sink, the form must be s-shaped. You can use conventional copper wire or construction ties to fix the corrugated pipe in this position.
Difference pressure in the pipe and sewage. With high pressure in the sewage, the unpleasant smell breaks into the apartment. Sometimes the vacuum is created in the sewage because of which the hydraulication remains without water.
When installing the hydraulic circuit, the pipes of small diameter were used. Taks are very easy to clog. The only way is to clean the plumbing with special means eliminating blockages. Today they are in the market a great set.

Article on the topic: Why do you need a construction grater. Varieties of material

How to get rid of smell in the sink

Often an unpleasant scent of sewage in the apartment appears after a long lack of tenants. This is explained very simple. The water in the siphon was simply evaporated and the "plug", which prevents the spread of an unpleasant smell disappeared. To fix it, you only need to open water in the crane for a few minutes.

Get rid of stamuing

The most common cause of stupid air to the room is a blockage. It usually appears in the pipe or in the siphon. Usually they arise for the following reasons:

Economical water consumption that does not create a large pressure and can not wash and push all the contaminants further.
Washing out of food residues and other waste into the sewer. This leads to the fact that the remnants are twisted and glued together, forming a dense lump, which clogs the pipes.
The pipes are mounted incorrectly, it leads to the fact that water, along with contaminants, long delayed in the pipe. Thus, the pipes remain in the pipes or, the so-called sewer system. He narrows the clearance of the pipe, as a result of which blockages occur often.

You can use:

Vantus. To do this, it is necessary to turn on the water, fits tightly to the drain hole, creating a vacuum, and then make several movements top-down. This will allow a little to shore a bit, and the water breaks it and wakes out of the pipe.
Special chemicals to remove blockages. We should not be abused, since most of them are not safe for pipes.
You can pour into the drain hole of boiling water from the kettle.
Nicely coping with zooms ordinary food soda.
For more serious blockages it is necessary to use table vinegar. The acid in it is clearly splitting the blockage.
If you mix soda and vinegar, a chemical reaction will occur, as a result of which, a large amount of foam will be released. She will push the block on.

If the siphon clogged, but a pipe, then you can use a plumbing cable. To do this, it is introduced into the pipe and rotate clockwise, then it is washed with all pollution.

How to get rid of the smell of sewage

Article on the topic: Cable and infrared floor: pros and cons of systems. Is the IR floor harmful to humans?

Problem in ventilation

If the smell is delayed in the room due to poor ventilation, then it is necessary to clear it as soon as possible or replace it, as it is fraught with the appearance of mold and fungi. To check if you need ventilation in cleaning, it is enough to bring a sheet of paper or a light handkerchief to the exhaust hole. If it does not fall, then it's not in ventilation.

No matter what the reason for the appearance of an unpleasant smell in the apartment is always possible to eliminate it, and if proper attention is paid to prevent, then you can avoid these problems at all.