Cabinet with bathroom sink - practical and stylish solution

Of course, no bathroom can not be imagined without sink. Comfort and comfort in this room will be able to add only correctly selected furniture. In view of the fact that in this room, as a rule, there is very little space, the ideal version of furniture for it is the cabinet with the embedded sink.

Characteristics

A bag with a washbasin is called a design consisting of a small locker with a built-in sink and mixer. Drain and plumbing pipes are conducted inside the cabinet. And the hole for the mixer is made on the sink or on the surface of the table top.

A few shelves with doors, extensions and drawers, departments with baskets for dirty linen or towels can be provided. Of course, the more the boxes, the higher the capacity and functionality of the structure. And if the size of the rooms allow, then two sinks are embedded in the furniture, which is very convenient for a large family.

pros

It is a rational solution from the position of saving space, since the bedside takes usually an unused place under the sink.
It hides drain and water pipes.
Inside the bedside tables can be placed numerous bathroom facilities: cosmetics, household chemicals, towels, washcloths, dirty underwear, etc.
Look stylish. A wide offer of a variety of forms and design allows you to choose a bathroom under any interior design.
The countertop in the sink provides additional comfort during the hygiene procedures.
You can install baskets for dirty linen in a large tube and even washing machine.

Minuses

The disadvantages of the bedside table with the built-in washbasin, in general, no. But they can be discovered when you select the wrong model for your bathroom. For example, if in a small bathroom, place an oven bedtop with a tabletop. Some absolutely do not like floor bedside tables with solid legs. In their opinion, the sink such a bedside table is inconvenient, since the legs cannot move freely. In addition, sometimes the repair of faulty plumbing installed inside the furniture is not always possible and convenient.

Views

Now you can find many types of furniture with a washbasin. They have different shapes, dimensions and installation methods, are made of various materials and parts.

Depending on the fastening method, two types of bedside tables are distinguished:

outdoor;
Suspended.

The advantage of the first group Tumb is that:

They are easy and easy to install;
You can move into different parts of the room as much as you like;
There is a huge amount of outdoor models of Tumb, decorated in different ways;
They are able to withstand a huge weight, so it is on the outdoor couch that you can see the washbasin bowls from marble.

Outdoor stands may have different bases, for example, models on legs or with basement. The second subspecies is also called the stands on the monolithic frame.

Cabs on legs

The installation process of such models is simple. If the design does not need to be attached to the wall, it is enough to collect it and just put in the right place. Such models can be placed in rooms with a warm floor system. They do not interfere with the legs freely move, easily and freely clean the room cleaning. The most reliable stands are those samples on the legs, the material for which the chrome metal is served.

Bedside tables with basement

They are very convenient when used, and they can be simply placed in the right place. Such bedside tables are reliable if the base is made of reliable material protected from moisture. Otherwise, the whole design can lose their integrity after a while.

Corner Tombs

Ideal suitable for small rooms. Occupy a minimum of space and at the same time perfectly perform their tasks. It looks stylish enough and very neat. Despite the fact that they look compact, they can accommodate many items. Corner furniture models with washbasin are also outdoor and walls. It is these vendors today are becoming increasingly demand, as they are installed in most commonly unused place - the corners of the premises.

Article on the topic: How to make a ladder in a bathroom for the shower with your own hands?

Washbasin Moydodyr

It is a washbasin with a large mirror, with a built-in washbasin bowl and cabinets for storing things on legs under it.

Suspended Tombs

Like angular models, hanging stands are becoming increasingly popular with buyers.

Their benefits are obvious:

They can be installed in small bathrooms. At the same time, they are able to visually increase the space.
They are convenient to use.
Absolutely do not interfere with the cleaning of the room.
If it suddenly occurs flooding, they, including items stored inside them, will not be affected in any way.
They look very fashionable and stylish.

The only disadvantage is the need for fastening on a very durable wall. Such stands must be mounted using dowels or anchors. In this case, the surface must be either a capital panel or a brick partition.

Popular sizes

The most compact table with a washbasin is an angular model with the following parameters: 34cm width * depth 29cm * height 79cm.

The easiest and most small variant among ordinary bedside tables is a bag of 40 cm wide, a depth of 32.5 cm and 80 cm high. This option is suitable for small rooms. However, the most popular size among compact options is the chandes of 50 * 44.8 * 80 cm. For more spacious bathrooms, you can choose the couches with more volumetric dimensions: 90 * 46 * 84 cm., 120 * 45 * 82 cm. Etc. d. The size of the sink can also be different.

The most common option is a size bowl from 50 to 80 centimeters.

Design

Choosing furniture for any room, you need to pay attention to the appearance of furniture. It must correspond to the design of the room. Make it easy, it is enough to know some features of different styles in the interior. For example, for the room, which is made in a classic style, fit perfectly: marble countertop, porcelain sink, natural wood cabinet with elegant legs. Gold plated mixer will complement this luxurious interior.

High-tech bathroom has a large rectangular outdoor or suspended white chipboard with a white acrylic sink. To the interior decorated in the fusion style, you can safely choose bright and more saturated Tumb colors of the same form. You can purchase Moidodyr made of red wood with open shelves under the wash basin to the warm and cozy rustic style of Country. Oval mirror with shelves, two lamps with tissue lampshades and red-tree boxes of the red tree perfectly complement this image of Moidodyra.

For those who want to create a more modern air style we advise you to draw your attention to the glass models of Tumb. Accessories for furniture with sink is better to choose another color, not coinciding, but harmony with the color of the furniture. For example, if the locker is light, then the handles are better to choose dark shades to it, if the dark is dark, then select the elements of light shades. Thus, if you decide to buy a cabinet with a sink, then you need to do it carefully and with love so that in the bathroom it has become not only comfortable, but also cozy. Allow yourself boldly experiment with different styles, having previously familiarized with their features.

Materials

Furniture with a washbasin should be functional and beautiful, but if it is made of low-quality materials, then its entire benefit is reduced to zero. Since it is precisely from the materials that the quality and service life of the entire design depends. The basic requirements for the materials of the couch are their ability to experience sharp drops of temperature and moisture resistance. Materials that have such qualities are MDF panels, chipboard, artificial stone and wood. The surface of furniture made of MDF is usually processed by two methods:

Paint. First, the primer is applied to the surface of the material, and then it is painted paint in several layers. It makes the furniture highly protected.
Treatment with special composition. The material, both outside and inside, is processed by a special moisture resistant liquid, which prevents the process of breeding and spreading fungi, mold, etc ..

The cabinet made from the chipboard is cheaper, and the various mechanical damage to it is nestless. The surface of this material is covered with leaf plastic, which prevents the stratification and swelling of the material. In the reliability of furniture and sinks from artificial stone, you can never doubt. The only one, it is very important that any damage, including scratches that can destroy the integrity of the material on the surface of the furniture. If the furniture is made of wood, it must necessarily be covered with a special moisture resistant. The cost of furniture made of natural wood is somewhat more expensive than those manufactured from MDF or chipboard.

Article on the topic: How to make a cornice for curtains with their own hands from girlfriend?

Equally important is the quality of fittings. Over time, the doors can begin to creak and get rid. Therefore, the stronger they are installed, the longer they will serve you.

As for the sink itself, it can be ceramic, porcelain, faience, cast iron, steel, stone and glass. At the same time, the materials of the couch and shells must be combined.

Depending on which materials made of the whole design, its value changes. At the moment it ranges from 1050 to 325600 rubles.

Buying recommendations

To the acquisition of furniture and plumbing for the bathroom must be taken seriously. After all, you are not buying it for one year, but much more.

To not be disappointed in your purchase, consider the following recommendations:

Carefully consider the location of furniture and plumbing in the bathroom. Implement accurate measurements where you are going to install the Tumbler.
After examining the types, shapes and sizes offered on the market and Tumb, make your choice.
The cabinet without solid walls on the reverse side is convenient from the point of view of water and sewer system.
Choose materials resistant to sharp temperature differences and to a high level of humidity. The presence of any crack, scratches and other damage, as well as drowshes and not scratched places is unacceptable.
Prefer fittings made of nickel-plated metal or aluminum. Such accessories will serve longer than the one that is made of chrome plastics.
The presence of closers on the doors and boxes will prevent the emergence of high-profile stuffs during closing.
The larger the cabinets, lockers and compartments, the higher the functionality of the furniture. The presence of mirrors and baskets for dirty linen also increases the usefulness of the couch.
Make sure that the selected furniture corresponds to the selected interior design.
It should be painted high quality and smooth.
If you are going to buy an angular model of the cabinet with a sink, then make sure that the angle of the intended placement of the cabinet is equal to 90 degrees, otherwise the angular tube cannot be installed until you apply the angle of the room .

Installation

Installation of the couch with the built-in sink consists of several stages. To successfully go through all these stages, you need to follow some rules.

Choice of placement location

Usually, the new shell is installed in place old. In this case, you do not need to break your head over how to carry out water supply and sewer. If you wanted to install the Tumba in a new place, you will have to solve this problem. In addition, the furniture itself must be safely accomplished, and its lockers are freely open and closed. If you are going to buy a wall-mounted model of a sink, make sure that the wall strength.

Production of calculations and marking

The product of calculations and marking makes it possible to carry out the pipes exactly, without prejudice to the scene itself. Fittings, that is, connecting parts of the pipelines, must be above the middle shelf. Wrong measurement may result in the fact that they will rest in the walls and shelves of furniture. This applies to the sewage system. For a drain pipe that comes out of the floor, you will have to drill a hole at the bottom and shelves of the couch. Then the corrugated hose turns out from the bottom to the top. Therefore, it is better to all accurately measure and spend all the pipes through the wall.

Purchase of materials and preparation of necessary tools

In the process of installation you will need:

adjustable key;
FUM tape;
screwdrivers of different sizes;
screwdriver;
mixer;
siphon;
Plastic corrugated hoses.

If you purchased furniture in a disassembled form, you will have to first collect it with a screwdriver. This will help you attach the instructions for assembling furniture. During this procedure, make each item to be firmly connected on the other. Because after you set the sink on it, tighten the screws stronger will not be possible.

Article on the topic: how to paint the glass and create paints with your own hands

Setting the cabinets with sink

After passing the previous stages, and successfully preparing all the necessary items and tools, you can proceed to the process of installing furniture with sink:

Disconnect the water supply. Connect the mixer with hoses and secure the crane on the sink. The best mixer breaker for the couch is a modern one-art model.
Use FUM tape (fluoroplastic sealing material) for sealing connecting parts.
Install the siphon on the drain hole.
Attach the sink to the surface of the couch.
Make the collected furniture to the place of installation. Do not install the cabinet with a sink close to the wall, since the lack of ventilation may cause mold. If you need to attach it to the wall, take it using special bolts. But before this make calculations and make marks.
Move the end from the installation site and drill in the marked points on the wall. Insert the dowel there, return the tube back and secure it with bolts.
Connect the sewer and water supply system. This creates the installation process.

In the process of installing furniture with a washbasin, sometimes difficulties arise. For example, if the sewage hose prevents the tight fit of the furniture to the wall, then the need to sprinkle part of the shelf, bottom or wall of the couch. To do this, use the hack or jigsaw. Or, for example, there are no holes for bolts in the sink to install it on the wall. In this case, you can glue it with silicone glue.

Testing of the shell

Having finished the assembly and installation of the couch with a washbasin, check the performance of the entire design. First, check the reliability and stability of the tube, then turn on the water and check that anywhere does not occur. If everything works properly, you can safely donate work or enjoy new furniture.

Manufacturing on its own forces

Make the cabinets with the embedded sink is easy. The advantage of the hand-made furniture is that it will be unique in its kind, perhaps it will be cheaper and will be made under the size of your bathroom. However, in any case, you first need to make a estimate and calculate the costs of buying materials and missing tools. If it turns out that the purchase will cost you cheaper, then what's the point of spending on this additional money, efforts, and most importantly. If you still decided to make a letter with your own hands, then first measure the place of intended placement and, in accordance with this, proceed to buy the following materials, details and tools:

Moisture-resistant material for the couch.
Sturdy and waterproof countertop.
Shell of the desired size.
Mixer.
Foots and handles for furniture.
Fasteners and details.

For the manufacture of cabinets under the sink, you need to go through the following steps:

Buying material for furniture, it can be cut in place. The main thing is to specify the correct and accurate dimensions of the future stands.
Having come home, you only have to collect sawn boards.
Set legs and handles.
The next step in the manufacture of the locker with the washbasin is the installation of a washbasin in the tabletop. To do this, cut a hole for the selected washbasin: first take the paper, make the pattern on it, cut the bottom of the sink, impose it on the worktop and circle the inner line of the hole in paper with a pencil. Drill drill a hole measuring about 8 mm. Then swollen the electroller along the trajectory of the pencil and cut the hole for the sink.
Then apply silicone glue on the edges of the washbasin and insert it in the worktop.
In the crane hole, set the mixer. Connect the water supply. If there is no such hole in the washbasin, then with the help of a drill, make such a hole in the tabletop with a diameter of about 32 millimeters.
Next, you need to attach the siphon to the hole for the drain at the bottom of the sink, connect the plastic corrugated hose to the sewer system and ensure the tightness of the connection with a magazine or sealant. Otherwise, an unpleasant sealing smell will be penetrated into the room.

To install the suspended tube and the sink in it, it is necessary to attach several metal corners to the wall. It is for them that she will subsequently hold the sink, a countertop and a cabinet.