The interior design began to enjoy the great popularity of the figure of plasterboard on the wall. Many people are asked: how to make a sheet of plasterboard become round or oval, had a smooth curly bending?
After all, in the center it is located the core from plaster, which can break.
Elegant interior design - smooth forms of gypsum products
Ways to create spectacular figures from plaster sheets
Two methods are used to create figures:- Wet;
- Dry.
Consider them in more detail.
Dry processing method
This method is the most simple. Arched plasterboard is used for the manufacture of figures. It is characterized by a less thickness than the standard (approximately 6 mm. -6.5 mm.). The maximum radius on which the sheet can be cared is 1000 mm. (external) and 600 mm. (interior).
Smooth arocal gl.
Bending is easily done with your own hands. Mounting is made on a metal frame, which is strung in the specified form (this is easy to do with cutouts on the side of the profile).
Important! Arched plasterboard leaf after bending should be immediately fixed using self-screws and screwdriver to the installed frame.
To obtain the curvature of a large radius, cuts can be made on drywall: are made in parallel on one side of the sheet (on the inside - for concave structures; on external - to create columns).
When applying this method, it is worth considering that the price of arched plasterboard is an order of magnitude higher than on the usual one.
Wet treatment
If the cost is crucial for you, you can use the wet method. He is somewhat more laborious.
The small instruction is below:
- The first stage of work - you need to moisten the wet roller or tassel outside of the part (you need to use warm water).
- Moisture, penetrating through the cardboard to the gypsum core, softens the gypsum. This allows you to encourage the product in the right way.
- After filling, the sheet is fixed on the template and it is maintained until the design is driving.
- Smooth bend can be obtained in another way: the leisure is fixed on the support. After some time, the panel gets the necessary smooth form.
Important! The cargo is selected in such a way that the GCL does not break under his weight.
To create curly walls of drywall with the parts of the radius less than 600 mm., It is necessary to perforify the products with a special needle roller. Roller rolled either one or both sides.
Article on the topic: How to perform zoning hallway and living room: work techniques
At the same time, fine holes are obtained on the surface of the GLC, through which moisture very quickly falls on the gypsum core. And GLCs quickly and accurately give the desired form.
Stock Foto Needle roller for perforation
Important! If there are many decorative elements from drywall in the interior, it is better to charge this process to professionals.
Curvilinear plasterboard products
Product in template
Making framework
The figure of drywall is built on the frame, which should be stronger than for standard partitions.
Therefore, metal products are used - depending on the purpose can be used as 75 mm. And 200 mm. profile.
- For partitions performing purely decorative functions, the use of 50 mm is sufficient., 75 mm. Frame.
- For partitions on which it is planned to hang the shelves for books and decorative elements, it is better to use more reliable frames (100 mm profiles, 150 mm., 175 mm.).
Under the figures on the walls of drywall, having smooth bends, metal profile "bends" (with the help of "Bulgarian", cuts are made or segments of a rectangular shape are made). All radius areas are strengthened with metal jumpers.
Flexible arched corners
Device partition
Watching Plates by Template
You can mount drywall panels (which is pre-prescribed the desired form) by frame. You can also bind the framework to the prepared pattern.
All protrusions and cutouts are pre-drawn on the plaster plate, and the frame is recruited along the inner surface of the finished gypsum design. If necessary, the inner wall is filled with insulation.
Articles on the topic:
- Decorative plasterboard partitions
- Needle roller for drywall
- Columns from plasterboard
Finishing cladding
Any inner gypsum wall needs finishing. At a minimum, the wall is spacing and stained. For more spectacular and stylish execution, exclusive materials are applied: for example, sandstone or quartzite; decorative plaster.
Important! To screw the profiles to the ceilings and walls, you need a dowel-nail. Metal screws with a mold with a puck are used to connect together the elements of the metal frame. To squeeze the design of GLCs, you will need self-tapping screws with a flat head.
Gypsum County Partition
Article on the topic: How does the curtain from organza in the interior: let's see
Summary
The curvilinear gypsum figures today are very in demand: complex ceiling and walls are popular, columns are erected. You can create the most simple designs yourself, to create complex forms and products of a small radius it is better to use the services of professionals.
On our portal you can view the most diverse options for using gypsum figures, having become acquainted with the video materials presented.