Interested in how to glue the ceiling plinth from the foam on the surface, you should take into account all the options available today and choose among them the best. The better you work, the longer the result can please you. Today we will look at what glue and mixtures can be glued both the foam plinth itself, and the corners, other design elements.
Methods of installation
There are two main ways to glue ceiling plinths.
- Glue. A simple, traditional way to glue a baguette on the ceiling surfaces, with which few have problems, complexity. Some types of glue simply clutch surfaces, others serve as an additional leveling material. But with strong drops and irregularities, the surface is better to sharpen.
- Putty. Only a specialist can glue the plinth of foam from foam with a putty. The essence is to fasten the ceiling plinth for not fully frozen putty. Do it follows before sticking wallpapers on the wall.
Types of glue
The glue for the plinth of foam is applied different. Each of them has its own characteristics, nuances, subtlety of use.
- Polymer. These are specially designed mixtures that are excellent for the ceiling plinth. The most popular manufacturers are economies, titanium, moment. They differ in good viscosity, it is securely assembled products from foam, withstand quite serious loads, copier with wooden baguettes. There are instant and gradually hardening polymer compositions. Plus the instant adhesive in the fact that it is collapsed with the surface in seconds. But it requires accuracy and speed of action. Gradually, hardening polymer compositions can be corrected if the first time it was not possible to attach the plinth to the ceiling correctly. Polymer mixtures are dangerous because malicious evaporations are distinguished. It is better to work in the respirator.
- Liquid Nails. This type of glue appeared quite recently, but won great popularity. This is a universal composition, which is widely used for various purposes, including foam baguettes for ceilings. Disquires nepopient and acrylic liquid nails. The first type is used only in well-ventilated rooms, because evaporation is dangerous for a person. Acrylic liquid nails are not dangerous, they are created on the basis of water, but they are afraid of low temperatures. In the large weight of the designs, acrylic nails are not designed, but the foam baguette is quite easily withstanding.
Article on the topic: Lifting bed do it yourself: manufacture and assembly
Putty
Experts agree that for gluing the ceiling plinth, made of foam, it is better to use that putty.- This material perfectly copes with the task, does not require compliance with certain temperature conditions, do not allocate evaporation dangerous for a person;
- You do not have to fix it, keep the plinth for a few minutes waiting until the glue grabs with the surface of the foam;
- Putty is not only adhesive, but also leveling material;
- To glue foam plinth on the ceiling, you must perform several consecutive operations. Apply a little putty on the wall with a spatula, fix the plinth, pressing it against the wall, remove the excess putty. But this should be told in more detail.
Nuances of gluing
Using glue for gluing a foam plinth, it is necessary to observe a certain sequence of work, take into account the landscape nuances in order to achieve an optimal result.
- The ceiling plinth should begin to glue the corner, moving in two directions.
- To connect the carnis, the cutting of foam at an angle of 45 degrees is used.
- The glue should be applied to the inner surface of the foam cornice point, and not a solid layer of glue.
- Do not press too much foam against uneven walls, otherwise the cornice will turn out to be uneven, deformed.
Causes of failures
If you managed to choose correctly, which glue glue the plinth from the foam, then there should be no problems as such.
But there are situations in which the desired result cannot be achieved. There may be several reasons.
- You have not cleaned properly working surfaces. Before gluing the eaves from the foam, dust, moisture, be sure to remove. If the walls are bare, unpainted or not covered with wallpaper, it is recommended to apply a layer of primer;
- The glue did not have time to grab. Different adhesives require a certain time to grasp with the surface. If the plinth continues to disappear, hold it longer, so that the mixture has entered the reaction and fixed on the ceiling;
- Incorrectly chosen glue. The glue can be the most diverse intended for certain purposes. Consider an important point that glue can perfectly glue foam products with each other, but it will not be able to contact with certain surfaces. Therefore, before choosing the glue, taking into account not only its interaction with the foam, but also the type of the surface of the ceiling, to which the baguette will be glued;
- Impact of drafts. If there are too strong drafts inside the room, they can contribute to the rapid drying of the glue. This suffer from the characteristics of the material, it does not have time to join the reaction. As a result, the plinth falls off. It is advisable to glue inside the room, isolated from drafts.
Article on the topic: What are dry building mixtures for plastering?
Foam ceiling plinths glued quite simply, if you follow multiple key rules, not to move away from the recommendations of specialists. You can easily handle this task on your own.