Gypsum ceilings allow you to effectively place the room of any type and destination. They are used both in public institutions and in residential buildings.
In this article, we will try to reveal this method for the ceiling design.
The variety of textures of such material is impressive
Features of such ceilkov
Acquaintance with this material can be started with the study of its properties and operational characteristics. Many people confuse the regips ceilings with plaster. The first is the ceiling tile from plaster, and the second implies the use of stucco.Below the properties of ceilings from tile will be considered.
Design
Gypsum ceilings consist of two components: plates (panels) and a suspended system (see also the ceiling profile for drywall), which is attached to the surface. The panels are made of construction gypsum, and to achieve maximum strength, they are reinforced with fiberglass design.
In most cases, the plates are produced in size of 60 x 60 cm, however, by order of the consumer, the plates can make other sizes.
To install the frame for the plasterboard ceiling, standard models for the hidden and open suspended systems are used. The selection of the system depends on the type of plates. The panels are attached to this design, therefore, from it, in many respects, the strength of the future ceiling depends.
Types of plaster ceiling panels
If you decide to make a ceiling plaster, then you need to know that the panels have several varieties. So, they are divided into lightweight and standard. For the manufacture of lightweight samples, special technologies are used, such as adding porous granules and drying in special chambers.
Regipus ceilings can take the most unusual geometric forms
On the texture of the plaster panel are divided into:
- embossed;
- smooth;
- Perforated.
Article on the topic: Is it possible to iron a fatin iron and how to do it right
Moreover, often people use several plates species at once. This allows you to create an interesting design with attractive elements and unique forms.
Advantages of gypsum ceilkov
Now let's get acquainted with the main advantages that the ceilings from plaster can be proud of:
- High moisture resistance . Thanks to this fact, such plasterboard ceilings can be installed even in rooms with high humidity, such as in the bathrooms or pools.
Lightweight panels can even withstand direct immersion in water.
Tip: When buying lightweight plates, check the seller the level of their moisture resistance. The fact is that not all models have this property.
- Ecology . Gypsum is a natural natural material that does not distinguish any toxins.
Consequently, its use is not harmful to health, so that it is applied even in health facilities.
The use of bulk slabs allows you to visually expand the space
- Reflection . The ceiling made of plaster has a linger of more than 85%. It eliminates its owners from the need to apply additional lighting during the daytime.
- Soundproofing . Such ceilings allow you to increase the soundproofing of the room. When buying plates should pay attention to the fact that smooth samples reflect sound, and perforated absorb it.
- Fire resistance . Gypsum is a non-combustible material. It can be used even in buildings with elevated fire safety requirements.
- Appearance . The design of gypsum ceilings allows you to transform any room. With their help, you can implement the most courageous design ideas.
Amazing fitness allows tiles to apply any curvilinear form
- Simple montage . To install such ceilings, it is not required to pre-prepare the surface. This fact significantly reduces the time costs.
How to make a gypsum stucco
Now it has come a turn closer to get acquainted with stucco. With it, you can create truly unique interiors, as it can be given any form.
Article on the topic: How to adjust plastic windows yourself
Below will be instructed how to make this item.
- To determine the amount of solution, you need to pour water to the edges, and then pour it into the container in which it will prepare.
- First of all, in the container you need to pour water, and then fall asleep plaster. It is necessary to do this in small portions, regularly stirring. This operation is very similar to kneading the test.
- Approximately 20% of the solution must be pouring into another form. Next, you need to drive out from the solution of air bubbles. To do this, raise the edges of the form and drop sharply. It is done on both sides.
- After that, it is necessary to make a reinforcement of the product so that the plaster stucco on the ceiling turned out to be durable. As fittings are used Lucin, plumbing pass or copper wire.
This element needs to be put on a flooded surface and stay with a spatula.
Gypsum ceiling allows experimenting with lighting
- It is then poured the molded solution, and the rear side of the blank is leveled by a wide spatula, which should be a little wider than the product itself. After a few minutes, this operation is required to repeat.
- In order for the future gypsum ceiling to be durable, it is necessary to provide him with artificial adhesion. To do this, you need to do on the surface of the blank of notches using an acute subject.
The main period of solidification of the solution lasts about 15 minutes, depending on the thickness of the product.
Tip: Do not try to check the hardening level manually, as this can damage the product. Better wait a little longer time.
- To pull out the product, you must turn the shape along with the box upside down. After that, the box is removed, starting from the middle, and free from silicone rim.
- For complete drying of stucco, it is necessary to give it to fly on a flat surface in a dry room of about five days.
A little fantasy - and you will create a unique design in your home
Article on the topic: Substrate under the warm floor: Water and infrared electric, heat-reflecting lavsan film is better
Conclusion
This article covered the main components of gypsum ceilings. It should be noted that it is not necessary to stop on one species. After all, the tile ceiling from the gypsum is perfectly combined with stucco and any other decorative elements.