Before laying PVC tiles to the floor, you should read more about the features of the material. Such an outdoor coating is not a novelty, however, today the market presents more modern samples with improved properties and a variety of performance.
PVC – This is polyvinyl chloride, material that is widely used in the construction and design of the interior. It is easy to work with it, and the characteristics in some aspects are superior to other products.
Benefits:
- Strength. This is simultaneously a rather solid and elastic material. If you drop a heavy item on the floor, there will be no trace on the surface.
- Wear resistance . Withstands the mechanical impact, most household chemicals, temperature drops.
- Easy cleaning and hygienicity. On artificial material, bacteria do not multiply, it is not affected by fungus and mold. Care for tiles and wash the floors are very simple. In addition, a seamless connection prevents clogging of dirt into the joints.
- Quick installation. PVC glue is easily and the process takes much less time than laying the tile. It is not necessary to remove smooth seams and additionally rub them after completing the work. The new floor is immediately suitable for operation.
- Variety of products. A wide range of colors, shapes and textures. Can imitate laminate, skin and other types of facing.
- Moisture resistance . If the laying is performed correctly, the coating will provide complete waterproof.
- Pleasant to the touch. Tile in winter is not so cold, and it is softer than ceramics.
Structure
The indicator of the environmentality of the material depends on the type of raw materials used. High-quality samples do not distinguish toxins even when heated, so pay attention primarily to the products of proven manufacturers.
Materials and tools
Before you start putting the tile, prepare everything you need. You will need:- Special liquid glue for polyvinyl chloride;
- a spatula with small teeth;
- level;
- Corolnic;
- Thread and roulette.
Article on the topic: How to make a sofa to the kitchen with your own hands
Laying is performed on a special glue composition. Depending on the type of draft floor, the mixture components may differ. Since it is necessary to lay a tile on a flat base, prepare everything you need so that the height differences can be eliminated. This is done with a putty and sealant, flooring from plywood, OSB, fiberboard or drywall, concrete screed, etc. Be sure to drive the basis and process it with antiseptic and water-repellent impregnations.
Surface preparation
Before you begin to glue PVC tiles to the floor, you need to hold a number of preparatory work. Sometimes it takes even more time than the labeled material itself is directly.
Remove all trash before installation
Clear the room and remove the worn coating. In principle, you can put PVC directly on the old floor, but there is a risk that it will affect the quality of the clutch. You need to consider not only the finite cladding, but also the whole solution.
Spend careful cleaning, drive the basis, and then whatever the cracks and potholes. You can use additional flooring, such as Faneur or drywall. The perfect option is a screed.
If necessary, make waterproofing. To do this, it is best to use liquid compositions. In the hallway, such a measure is not mandatory, the material will cope with the task of retention of moisture.
Marking
It is applied in advance so that it is easier to navigate when installing. First define the center of the room. Use the roulette to measure the distance and stretch two threads so that the place of their intersection is the central point. Make a mark and output angle of 90 degrees.
You can put PVC tiles to the floor not only with a solid layer, but also with the use of decorative inserts, so mark them. It is recommended to think over and draw a layout scheme. Test marks will facilitate the task of installing a complex ornament and will be reminded on time, which you need to change the type of material.
Article on the topic: PVC floor covering: floors and stoves, floor panels with locks, reviews and parquet polyvinyl chloride, photo
Tile will have to trim, so it is better to determine these places even at the markup stage
Laying
The base temperature before applying glue should be within 25-30 degrees, and the humidity coefficient is not more than 5.
Laying is performed from the center of the room, according to test marks. All area must be divided into several sectors and work with each separately.
Tile usually put on a special mixture, although the manufacturer offers and lock material
Stage order:
- Apply glue to the surface of the first sector floor.
- To the central label, attach tiles.
- Continue to work with consistent rows diagonally, towards yourself.
- To glue the material just press it to the floor and spend on it with a roller or soft spatula.
In contrast to ceramic tiles, polyvinyl chloride can be glued into the joint, so the filling of the seams is not required.
It is necessary to work quickly so that the glue is not dry. Cutting the solution wipe with a rag moistened with alcohol.
If you need to trim a fragment, do it at the very end when the laying of all the integer parts will be completed. Use a raw knife, holding it at an angle of 45 degrees.
Put outdoor PVC tiles with their own hands very simple. In addition, you do not need to wait a few days until the coating is dry, you can go immediately after installation.