Preparing everything you need in carrying out facing works, analyze the features of this room and already repel from these nuances in the future. Toilet - tiny room area. In a separate bathroom, the bulk of moisture accumulates in the bathroom, in the toilet, the indicator is not so significant.
Choosing a tile, keep in mind that in a small room with artificial lighting, a light medium-sized light tile is better. For decorativeness, when laying uses a horizontal separation of two shades of a single gamma with a frieze. As for the invoice, it is recommended to acquire a sleek glossy material, since it is less susceptible to the accumulation of pathogenic microbes and various kinds of pollution.
Before starting work on styling a tile in the toilet, prepare the following set of tools and materials:
- glue for tile;
- grout for seams;
- silicone sealant;
- primer;
- antiseptic;
- water-repellent impregnation;
- putty;
- plasterboard;
- Metal profiles and corners;
- level;
- Bulgarian;
- slab;
- Perforator;
- chisel;
- a hammer;
- rubber cizyanka;
- spatulas;
- brushes;
- plastic crosses;
- mixture for screed;
- Ruler and pencil.
Basic tools
Surface preparation
The process of laying tiles in the toilet with your own hands begins with preliminary works.
We highlight the following steps:
- Dismantling facing. First of all, everything is excessive: plumbing, furniture, accessories. Using a perforator or a grinder, an old tile from available places is removed. In areas adjacent to communications it is better to use a manual chisel and a hammer to damage anything. The layer of solution is maximally.
- Alignment of the surface and processing. Since they put the tile only on perfectly smooth walls and floor, think about them in advance. Clean them from dust and treated with an antiseptic from fungus and mold. The floor is additionally labeled with a water-repellent mixture. Then the concrete is stuffed. The walls are plastered, the floor is poured with a screed of a small thickness.
- Installation of the box. It is built from moisture-resistant drywall to hide communications. The form is attached using metal profiles, and the sheets of GKVL are screwed from above. It is necessarily access to the pipes, so they make a surrounding hatch. The angles are displayed, the joints are shit.
- Marking. Decide exactly how you want to build a toilet with tiles and apply the appropriate distinction.
Article on the topic: Corner baths - types, sizes and advantages
Finishing is performed after special training
Floor
Begin laying outdoor tiles in the toilet with integer fragments, but moving from the door deep into incredible, try to determine the position of the elements to start working from a long wall.
Alternative: Locate the first tile in the corner near the door, and then continue the row of deep into the corner. Earn a long side and go back to the exit.
Initially, all whole fragments are laid on the floor. Then the plot discharges extreme parts. A hole for the toilet and pipes make the grinder. Marking is applied to the opposite side of the tile.
Consider that the toilet room is small, so the laying is carried out so that in the center there are whole elements
How to put a tile on the floor in the toilet:
- Prepare the solution and leave it for 10-15 minutes. Tiles Soam in the water.
- Apply glue to a small section of the floor and distribute it with a toothed spatula.
- Take wet tiles, depress excess water, wash it from all sides.
- Attach the tile to adhesive-based and press. Fragment of the fragment and tighten with a fragment on the whole area.
- The seams are 2-3 mm, the solution at the joints of the jigs. Insert crosses.
- Do not forget to check the level.
Walls
Special space for designer maneuvers, unfortunately, there is no place in this room. Decorative rectangular separation frieze and several inserts with a bulk pattern are acquired to decorate walls. Unusually, but very stylish looks a mosaic facing.
How to put a wall tile in the toilet:
- Start the position of the rows. At the level of the second, fasten the reference rail.
- Apply a small amount of adhesive solution on the wall. In the presence of significant irregularities, increase the thickness of the glue, smearing it and the tile itself. Distribute the solution with a toothed spatula.
- Stick on the wall tile. First, work with integers, then add ripple angular fragments. The latter are stacked the elements of the lower row.
- The box is separated by the same tile.
- In some houses at the bottom of the walls in the toilet there is a small ledge like a concrete plinth. It is lined with narrow rectangular tiles.
Article on the topic: Methods of mounting stone washing
The finish begins below
Do not hurry to immediately put all the walls of the whole. Work short approaches. So that the glue managed to dry and the tile did not spread. The doorway is facing with rifled parts, if the whole does not fit into size. Sleep comfortable with plates and grinder (for complex shapes).
Stood the seams and sealing joints
This is the final stage that is easily carried out with their own hands. The interlocking space is filled with a special grout for seams using a rubber spatula. On the perimeter of the planes and the corners provide additional coating with silicone. The sealant is also used to fill the joints on the camouflage box, around the pipes and at the place of adjacent toilet bowl.Now you know how to properly put the tile in the toilet correctly. Observing recommendations, fulfill all the work qualitatively, beautiful and without help.