If you need to buy firearms with a compulsory requirement for storage it is the presence of a closet or safe. His absence, in accordance with current legislation, gives the right to representatives of the Ministry of Internal Affairs to refuse to issue permissions. The weapon or safe box is a type of a non-controlled cabinet designed directly for storage.
Requirements for designs
The following requirements are presented to any weapon safe:- The device must be equipped with two locks. The thickness of the drawer walls is from 2 mm.
- When buying weapons in a house or apartment, a second cabinet should also be provided, where the cartridges will be stored. The presence of locks must. In this safe, the wall thickness should be greater than 3 mm.
- The presence of several types of locking devices. It is important to use different types of locks - key and code. The most optimal option is to combine these species.
- Maximum bomb resistance.
- Sufficient capacity.
Since the safe is designed to store weapons, it must be heat-resistant. Therefore, such structures are made of metal.
Types of safes and their features
Three main categories of drawers can be distinguished, differing depending on the type of weapon stored in them:
- Hunting. Such devices are necessarily equipped with steel walls with a thickness of more than 2 mm. Be sure to use two or more locks, with different designs. In addition, inside the cartridges department are required. The wall thickness should not be less than 3 mm.
- Curving. In this case, the thickness of the anterior wall is in the range of 3-5 mm. An additional charged department is required. For fastening a gun provides a special bracket.
- Pistol. To store this type of weapon, the safe must be equipped with a wall with a thickness of at least 2 mm. Wanted durable and resistant to hacking locks. In addition, the design must be complemented by the traizer. This will not keep the cartridges and guns together. The adaptation itself is fixed in the wall either inside the table. The traizer door is equipped with a plate that prevents drilling a shut-off mechanism.
As for traumatic weapons, in this case the requirements are approximately similar. It doesn't matter why a gun is acquired or a gun, the main thing is to ensure a safe place to keep it.
Article on the topic: Plastic or metal drainage trays
What to take into account when buying
Choosing a safe for weapons, it is necessary to take into account the following features:
- Capacity. You should calculate in advance how many weapons will be stored in it. If the box is bought for a gun, you need to take into account its height. Of course, it makes no sense to acquire a wardrobe for ten Karabinov if 1-2 weapons trunks will be stored.
- Weapon type. It can be rifled or smooth. It is necessary to immediately decide on the type, since the dimensions will depend on this and the requirements that are presented to the design.
- Additional ammunition shelves. In some models, they are initially provided.
- Type of lock. In low-cost fixtures, as a rule, two simple key devices are used. If you need to ensure maximum security, it is better to choose better and expensive models. One of these is biometric locks. Unique protection is provided at the expense of a special technology that scans a fingerprint.
The cost of fixture with a mechanical lock with password is higher, but such devices do not require the use of the key. Electronic protective products also protect weapon code, but this option is most reliable and practical.
Installation of the safe is not recommended next to the door. However, it is important to ensure the most durable mount to the wall or the floor. If there is shelves inside the design, this will allow you to quickly change the internal content if necessary, if you need to store different types of weapons.