What to select the floor for the arbor

Anonim

Even until recently, the choice of floors for floors in the arbors, on the verandas and terraces was very limited - the wood was most often applied. Today, the market of building materials has been replenished with new types of coatings, as a result of which the choice of choice is more acute. To help determine the floor covering in such premises, then we will look at the existing finishing materials and their features.

What to select the floor for the arbor

Paul in a gazebo covered with wooden boards

Wooden boards

Despite the large selection of building materials, the most popular coating remains wood. The floorboard for a gazebo is natural, environmentally friendly and very beautiful material.

Device wooden floors

Wooden floor has the following construction:

  • Lagges from a bar are put on the top strapping of the foundation, which are fixed by bolts or with special fastening corners.
  • The planed boards with thickness are mounted on top of the lags, as a rule, in two centimeters. To improve ventilation, it is recommended to docile board boards not too tight.
  • The gender is then covered with antiseptic composition to protect the coating from rotting. Apply the composition in several layers.

Wood features

The main disadvantage of the wooden floor is the need for constant care. Prevention against rotting should be carried out at least one or twice a year. Therefore, it makes sense to pay attention to other, more modern types of coatings.

Articles on the topic:

  • Paul in a gazebo: Options (photo)

CSP

It looks very modern in the gazebo floor of cement-chipboard. CSP is a multi-layered non-heavy material. It is not difficult to guess from the name, it is made of chips of small and medium fractions, and cement is used as a binder element.

Article on the topic: Shelves in the bathroom - we optimize the space

Features CSP

The mixture for the future plate is performed in several layers, each of which has a different ratio of ingredients. After crimping, the slabs practically do not have air capillaries. Therefore, the material is considered moisture resistant and fireproof.

Dignity

In addition, other advantages should be allocated:

  • Resistance to rotting.
  • The surface of the slabs does not need putty and completely ready for painting.
  • The stove itself looks good - it has noble light gray and has a smooth, but not slippery surface.
  • On the floor of the CSP is not cold to walk barefoot.

Tip! The TSP surface can be illuminated either to bond with decorative tiles.

What to select the floor for the arbor

In the photo - Polymer composite (terraced board)

Polymeric material

Another excellent option is the deck or terraced board. This is also a wood material that consists of a mixture of wood sawdust and polymer - PVC plastisol or polyethylene ND.

The terraced board is easy to distinguish from the deck on the corrugated surface - anti-slip grooves are applied to it. Externally, the material is practically no different from natural boards and has all the advantages of wood, but he has one significant advantage - durability several times more than wood.

Advantages and disadvantages

Polymer material has quite a lot and other advantages:

  • Not affected by fungi, mold and bacteria;
  • Resistant to ultraviolet rays;
  • Does not change the color throughout the service life;
  • Easy to wash;
  • Resistant to atmospheric influences and is very durable.

As for the shortcomings of the coating, then it is perhaps one - the price of it is significantly higher than on the natural board.

What to select the floor for the arbor

Porcelain tile

Ceramographic

The most unpretentious floor for the gazebo is a porcelain tile. It has all the advantages of ordinary ceramic tiles, but it has high strength.

Article on the topic: sandstone tracks do it yourself

The only one, when choosing, you should pay attention to the outdoor tile for the arbor be a corrugated, otherwise it will slip in winter.

Cerambulant tile flooring

Porcelain stoneware must be laid on the cement screed.

Instructions for laying looks like this:

  • First of all, the top layer of the soil is removed.
  • Then the base is falling asleep by large-scale gravel.
  • Then the sand layer is falling asleep and the surface is aligned.
  • Next, a layer of concrete is poured on a leveled surface with a thickness of about 4 cm.
  • When a concrete screed finds, you can start laying tiles.

Tip! If in the gazebo you need to perform insulation, then the tie can not be done on the pillow from the rubble, but on the sheets of the support professional flooring. From his other types, it is characterized by a higher wave. The professional flooring in this case stacked the lags, after which the screed is performed in two receptions - first of all, the professional flooring is filled, after which the reynching grid is performed.

Gulled floor

This technology is almost forgotten today, but such a floor can be made with their own hands, and it will turn out strong enough with an interesting and original texture.

What to select the floor for the arbor

Gulled floor

Manufacturing of molding gender

This floor is performed as follows:

  • Soil should be good to ravibly and align;
  • For strength, you need to plug a layer of rubble or gravel, a few centimeters thick.
  • Then it is necessary to prepare a mixture of clay, straw snech and water. The mixture should turn out to be sufficiently thick, tough.
  • The resulting "dough" need to lay out a layer of about 7 cm and at the same time it is well aligned.
  • After the upper layer serves, cracks may form on the surface. They must be pressed by the remaining clay mortar.
  • The finished floor can be lost to increase its moisture resistance.

The main advantage of such a coating is its low cost. Ingredients can be found for him even for free.

Article on the topic: Children's rooms 8 and 9 square meters. M.

What to select the floor for the arbor

In the photo - Paul in a gazebo of paving slabs

Paving tile

This version of the floor finishes is characterized by simplicity of laying and durability. This material can serve much longer than even a tree, concrete or asphalt. In addition, the coating looks beautifully.

Therefore, the floors for a sidewalk of paving slabs are very often found. To lay it, it is necessary to level the surface of the soil and pour a layer of rubble and sand. Immediately before laying tiles, sand should be touched a little.

Tip! No need to make the entire area of ​​the arbor immediately. It follows only the plot to which the tile will be laid in the near future.

Economical option

There is also another, the most economical and fast version of the floor. It is suitable for open arbors. It is to fall asleep the floor with gravel or sand.

What to select the floor for the arbor

Sand floor in a gazebo

The disadvantages of such a decision include what is not very convenient to walk on this floor, and the furniture will fall. In addition, the shoots of plants will be regularly breaking through it.

Output

Possible floor options for the gazebo there are a lot. Each of them is attractive in its own way, so the choice depends solely on your individual preferences and financial capabilities.

For more information on this, you can get from the video in this article.

Read more