We offer you a master class who will tell how to sew pillowcase with your own hands. It should be noted that this pillowcase has a fastening system - strings, which is an additional decor for this product.
In this embodiment, the insertion with an embroidery cross, which is made on the milk color flax.
The main material for the pillowcase is chosen cotton with a rose print in one color scheme with linen insert.
Did you notice that instead of one rosette on the embroidery there is a frog? True, unusual?
So, let's figure out how to sew pillowcase on the strings.
This more romantic type of cover on the pillow is slightly more complicated than the traditional pillowcase with lightning. In addition, in addition to the ties on the pillow, there is a so-called pocket or valve. However, if you are able to fully fulfill our recommendations, then you will definitely work out.
The cutting stage is sufficiently responsible, on which the correctness of the fulfillment of all work will depend. So, you should cut two identical parts for the transfer and back of the pillowcase. To do this, measure the sizes of the pillow and be sure to add one and a half centimeter of stacks on the seams on each side.
Then it is necessary to cut the part for the valve inside the pillowcase, the width of which is equal to one third part from the width of the pillowcase itself. You will also need four bones that can be performed according to your size.
Let's start sewing from the strings, for which the workpiece should be added to the front side of the inside and strain all over the perimeter, leaving the turning hole. Bumpups on the seams as well as corners should be trimmed.
After that, the strings can be turned on the front side and to smooth carefully. Now on the front side, these strings should be consolidated on their places on the right side of the edge.
Next, we take the inner valve and bend one of the long side by 5 mm, smoothed and bend by another 15 mm. After that, the resulting edge can be searched.
Article on the topic: Crafts from Papier-Masha - New Year's Christmas trees and not only
The other large long side of the valve follows the side of the pillowcase to which we sewed strings. Attach all parts follows the front side into the inside. Then you can set the valve to this part and process the edge.
Also need a hopping, which is inserted to the back of the pillowcase, from the side of the strings. Similarly, after the sewing, edges should be processed.
Next, the wrapper should be unscrewed on the other side and it is properly disclosed the seam obtained. We convey the edges and flash around the edge.
At this stage, the front of the pillowcase should be decomposed as in the photo, while the strings must lie in the opposite side from the valve.
Now on this unfolded item should be put on the back of the pillowcase with the front parties to each other.
An unscrewed valve should be hooked on top.
The resulting layers should be fixed with pins.
It remains only to sew a pillowcase only in three sides, the edges obtained should be processed, and the pillowcase is turned on the front side.
