Two-tight roof for gazebo hands of pallet owners

Anonim

The selection of the design of the arbor for his nice site each owner does at his discretion. Someone seeks to build a building in a single architectural style with the main home or other buildings on the courtyard, so to speak, wants to make his gazebo attractions and a highlight of the exterior of the site.

Someone does not make much values ​​to the design decision of the gazebo, based solely on the considerations of the simplicity of the design and the small budget of construction. But without exception, the issue of reliability and durability of the construction is concerned.

Two-tight roof for gazebo hands of pallet owners

The roof with two slopes is not harder than a single design.

Projects Arbor

Let us discuss what are the country extensions for relaxation and how to make the most suitable for you to choose.

Constructions of arbors differ from each other:

  1. In shape (from round to multi-faceted).
  2. Basic building material:
  • Brick.
  • A rock.
  • Metal.
  • Wood.
  1. According to the roofing system scheme:
  • Single one.
  • Double.
  • Complex, multi-level.
  • Tent.
  • Dome-shaped.
  • Arched type.

Each gazebo has its advantages and disadvantages, subject to erection in different conditions. Considering the various designs of the arbors (even the most exotic), many still prefer the most common and familiar to our eye designs with single-table and double roofs.

In addition, almost all private houses on the territory of the country are built under double-circuit roofs.

Two-tight roof for gazebo hands of pallet owners

If you decide to renovate the roof on your gazebo, be sure to replace all the rotten and cracked items

This method of the roofing device is considered the most acceptable in our latitudes, where the roofs have to withstand additional loads from winds and snowfalls. It is for the unimpeded sedimentation of precipitation in the form of snow and rain and two-tie roofs were designed.

And in addition, for the device of the two-tie roof, all roofing materials are suitable.

Article on the topic: Hovering curtains on hooks: The main stages of work

Bartal roof

Double roofs, based on the name, consist of two planes under the tilt, interconnected by the skate node.

The design of such roofs in turn also have several versions:

  • Standard, with an angle of slope 45 degrees.
  • With different skates.
  • With a big removal.
  • With fronton.

Interesting! Under the wide removal of the two-tie roof of the main house, you can arrange an indoor terrace on the second floor or an adhesive type arbor on the ground.

Device roof gazebos

The gable roof for the gazebo is usually suitable in standard version or with different slopes. Although it is one of the simple ways of covering, it is on a par with others, it requires careful calculation of the drawing of structures.

Tip! Even a simple sketching performance of the diagram of a solid system of a two-tie roof will significantly simplify the calculation of the need for materials and directly by installing all elements of the roof.

For the purchase of building materials on the construction, we determine the area of ​​the roof. Calculation of the coating materials is carried out taking into account the laying of almost all materials of the Vansel.

For your information! For each specific material, the coefficient of adhesion has a different value (specify from the manufacturer, the seller).

What material was not erected by a two-tie roof, the construction of the solo system consists of the same elements:

  1. Mauerlat. - Supplementing timber, receiving and distributing on the supporting structures of the load from the roof. On Maurylalat, depending on the design, relieve the rafting legs or the beams of overlapping.

Two-tight roof for gazebo hands of pallet owners

With the right design of the roof, you can do not just canopy over the gazebo, but a whole rest room

  1. Stropile legs define the roof shape (triangle) . They directly form a rafter system, located on both sides of the roof, a friend, opposite each other, connecting in the area of ​​the skate.

The dimensions of the rafter and their step (the distance between adjacent rafters, which is usually in the range from 600 to 1200 mm) depend on:

  • Gabarites gazebo.
  • Snow and wind load in your area.
  1. Stands - Vertical elements, serve to support rafting legs. The racks are installed in the middle of the rafter system (under the skate), and with the width of the roof 8 m or more, in addition between the eaves and the skate.

Article on the topic: Make the door for the cat do it yourself

Two-tight roof for gazebo hands of pallet owners

All items should be connected to metal fasteners (as in the photo)

  1. Sill - Support bar on which racks are installed.
  2. Runs - Horizontal bars serve to support the rafter system. They rely on the racks and are located in parallel to Mauerlat.
  3. Tightening - Brux, mounted perpendicular to Mauerlat to fasten the rafting legs.
  4. The whole system matures roofing and horse.

This is thus a suitable gazebo with a duct roof with your own hands.

Two-tight roof for gazebo hands of pallet owners

In this picture you can familiarize yourself with all sorts of attachment rafters

Articles on the topic:

  • A gazebo with a single roof
  • A gazebo attached to the house (photo)
  • Single Cuttings

Nuances of the device roofs for arbors

And in conclusion, it concerns the device roofing of country buildings, there are several rules.

This is not an instruction that should be strictly followed, rather advice advice that can significantly facilitate and simplify the process of construction and exploitation of the gazebo:

  • Severe materials of the roofing system will require the construction of more powerful supporting structures. Therefore, use facilitated roofing options.
  • If you plan to install a built-in or portable brazier in a gazebo, get comfortable about protecting roofing materials from exposure to open fire.

When choosing one or another roofing material, use only specialized fasteners

Tip! Built-in brand can be equipped with smoking system, which will not only increase the comfort of your stay in the gazebo during the cooking period on the focus, but will make this process to fireproof.

  • Covering the roof with metal materials, prepare for the fact that the shower and the more hail will be gulko in the inner space of the arbor.
  • When calculating the decoration of the roof should also take into account the snow load, an attacking structure in winter and wind, affecting all year round. Too much bias for rapid waste, it can be a threat to damage to the roof of a strong wind and will require the installation of special elements of the separating air flow. This will increase the total price of the arbor, and will have to work more.
  • Be sure to protect the roofing elements from the impact of moisture and possible biological attacks (pests, fungi), processing them with antiseptics and hydrophobic compositions.

Article on the topic: how to bed and glue linoleum to laminate: the main stages of work

Two-tight roof for gazebo hands of pallet owners

Use galvanized screws - they are significantly superior to the strength of the usual metal nails

Output

As you can see, the technology of manufacturing a double roof for a country gazebo is not so complicated and expensive. All you need - you can purchase in any construction store, and the workflow itself is described above. The only thing, do not forget to build a reliable basis for the gazebo, if the bulky design is planned.

In the video presented in this article, you will find additional information on this topic.

Read more