Table of contents: [Hide]
- Grunting of plasterboard base
- Sickness sickle sickle
- Putcloth plasterboard sheathing
- Grouting spacure
- How to stick wallpaper for plasterboard?
To date, the most popular way of alignment of walls and angles is a plasterboard covering. This material is considered universal and very often used in repair. But at the same time there is a reasonable question: how to glue wallpaper on plasterboard? The coating should be prepared for finishing, that is, is covered and primed. This work is not considered difficult, but for newcomers, difficulties may still arise.
Before embarking the drywall wall with wallpaper, you first need to apply primer, which will allow you much easier to cope with sticking.
Looking at the smooth surface of the material, it may seem that the preparatory part of the work can be skipped. Of course, you can omit and not make any preparation, while saving time in this way. But the thing is that, despite the presence of an external layer, the wallpaper is not as easy to glue the wallpaper on the plasterboard. And since this material very quickly absorbs moisture (wallpaper glue here is no exception), you will not have time to correctly recall the wallpaper. Glue quickly absorbed and dry. Remove the wallpaper cowned on plasterboard without damaging the basis, almost impossible, the reason for this is a strong clutch.
You can break the wallpaper on plasterboard any, most importantly - to properly prepare the basis for them. It will give you a guarantee that no bubbles, cracks or stains will appear on the walls. It turns out that the canvas here are suitable for any kind. Measuring the walls of the walls, you can safely go choose those that you taste. But the question remains unresolved: how to glue wallpaper on plasterboard and where is it better to start?
Grunting of plasterboard base
Scheme of gluing wallpaper on a plasterboard wall.
Properly applied primer maker fixes the putty with the base, in addition, will ensure reliable protection against the appearance of fungus and mold. You can use any primer here, for example, an acrylic is perfect (you can purchase it already in the finished form). If the material you purchased still requires preparation, follow the attached instructions. The primer under the sticking of the wallpaper is applied with a smooth thin layer.
Article on the topic: When you can glue the wallpaper after the primer
Back to the category
Sickness sickle sickle
Serpiankka must be used, sizing joints between plasterboard and facing material. In addition, it is very convenient to use it in order to correct small defects. This material has a lavasan or fiberglass base, in appearance it is a conventional white adhesive tape. The serpent is pasted not always firmly (it directly depends on its quality), it is possible to fix it with the help of PVA glue. Signing the joints of plasterboard sheets using such a tape, it should be put on the seam to put a putty. This is done so that the whole wall is equally smooth. Having done this stage of work, try to be in the joints there is no air. After treating the surface of fine-grained emery paper.Back to the category
Putcloth plasterboard sheathing
Swipping scheme with spatula.
Plasterboard sheat - it is an ideal even base, and it would seem that it makes no sense to put it, but it is done not only to eliminate all irregularities on the wall. Suppose you are going to change old wallpapers for new ones. If the plasterboard base under the canvas was not previously covered, it would be difficult to do it. The first difficulties you will have when removing old wallpapers, because at the same time you can pull the cardboard layer of the base (but it is at best), the canvas can also be filled with the gypsum core itself. Another reason why the wallpaper is worth it is still prepared and covered by the base - these are possible stains at the joints (especially if you chose light webs). As you have already seen, in order to properly glue the wallpaper, each step specified in the instructions should be performed.
Putty for plasterboard sheaturing is initially a dry mix of plaster or cement. On its packaging, there is a clear instruction describing each step of preparation. In any case, you will need a building mixer for this and a suitable container. There is an option easier. There is already a ready-made putty, but it happens two types: "Start", designed to align the walls, and "finish", to correct small defects. Therefore, when choosing it better to contact the seller-consultant.
Article on the topic: Crafts from macaroni do it yourself
If you decide to punish the wallpaper for a plasterboard ceiling, it is best to work with an assistant.
To work with putty, you will need:
- three spatula of different sizes (15-20 cm, 40 cm, 60 cm);
- small capacity under the finished material;
- Drill with a plassing nozzle or a building mixer.
Using the smallest spatula, take a small amount of putty and transfer it to the second tool (the one that is more). When applying material on the wall, try to lay a layer for no more than 2 mm, the spatula is better in a circle, thus traighting the smear. After each such action from the spatula, the remnants of putty should be considered. Use a small spatula for this.
Applying the first layer of putty on the plasterboard coating, use the "starting putty", complete the work "Finish".
It is recommended to apply primer between the layers - so the result of your work will be better.
Back to the category
Grouting spacure
Wallpaper blending scheme for plasterboard.All irregularities from the frozen material can be lured by sandpaper. But before the trim should be skiing. Getting Started, remember that at the same time it is very important to act carefully and not in a hurry, otherwise you can damage the layer of putty. As a result, the wall should get smooth and perfectly smooth.
Do you need re-primer? In order for the canvas well to glue on the plasterboard, a reuse (better in two layers) should be applied to the shashpuckle. In addition, it will temve the absorption of moisture (including glue) into the surface, which will allow you to make it much easier to cope with the sticking of wallpaper on plasterboard.
Back to the category
How to stick wallpaper for plasterboard?
The preparation of the foundation takes a lot of time, but as you have already been convinced, the fulfillment of all these actions is very important. Conducting preparatory work is necessary in order to bleach the wallpaper on plasterboard correctly and efficiently.
Article on the topic: Computer in auto hand
The ground mixture is best to apply the usual roller.
How to glue wallpaper on plasterboard correctly and where is it better to start?
- For starters, measure the length and height of the walls of the room. Take away from the overall size of windows and doors (when buying a web, keep in mind that all rolls should be one series, as well as their numbers must match).
- Before you begin to glue the wallpaper for plasterboard, you need to draw a vertical line, focusing on which, you stick the first tape of the canvase. It will help you with a level and plumb. Slowing the wallpaper, be sure to leave the allowances of several cm.
- In order to prepare the adhesive composition, the dry mixture is needed, gradually stirring, pour out in a container with cold water. Within a few minutes, the glue should be swept, after which re-mix it.
- For the primed base, apply the finished glue composition with a thin and smooth layer. If the wallpaper is heavy (for example vinyl), the glue is better to apply on the canvas themselves.
By gluing wallpaper on plasterboard, it is better not to hurry. Stretch the cloth over the surface so as not to break them. Crazy with the wall, they must lie smoothly, so with the help of a special brush, scroll the surface towards the edge so that there is no air between the wallpaper and the wall. If you accidentally stained with adhesive composition of the face of the canvas, it can be fixed using cotton fabric, the main thing is to do everything on time. Make sure that the plasterboard seams do not coincide with the joints of the wallpaper.
Thus, the question is how to punish the wallpaper is fully resolved. All work can be performed with your own hands without resorting to help professionals. It is only necessary to strictly follow the instructions.