Decoration of housing for the holiday, perhaps - the most favorite time of the needlewoman. You can make a little creative in the design of scenery or create a unique gift with your own hands. This article will be told how to make a Christmas tree from threads and glue PVA. There are several ways to create such an art Christmas tree. Its manufacture does not take much time, and the result will definitely please you and your loved ones.
About materials and techniques
The Christmas tree made of threads and glue PVA is manufactured using a frame. As it can serve as cones made from various materials - cardboard, plastic, foam. PVA glue is also different - stationery, construction, household.
If the glue stands in a loosely closed container, its density increases. Such glue must be able to dilute with water before use.
The appearance of the finished Christmas tree directly depends on the threads you choose. Their color and thickness are the most important characteristics. If you have conceived to make a big Christmas tree or decorate it with something enough, we advise you to choose threads thickening. Accordingly, even coil threads can be used to create an easy and air composition. Try combining the threads of different colors and thickness in the product, it will be very beautiful.
It is also possible to apply a thread on the base in several ways. You can lubricate the base itself with glue and wind threads at it. When choosing such a way, you need to act quickly - the glue can be frozen. For the second method, at first the thread is screwed to the base, and then it is treated with glue with a brush. This method also has a minus - skip a small site, and after drying it will not find a hardness, an ugly failure will appear in this place. The most optimal to perform such work is the third method. It is necessary to make it so that the thread is impregnated with glue.
If you just put the tank in a container with PVA glue, it is not known how threads behave. They can lose color, start confused, or worse - rushing.
So that this does not happen, you need to fill the glue into a plastic container. Then the prepared thread should be made in the needle and pierce the container through two walls. It turns out that the thread will not lie and pull out in the glue, and the glue itself will be quite evenly distributed. As it looks, you can see in the photo:
Method number 1.
For the manufacture of a Christmas tree made of threads and glue of PVA on a cardboard cone, use a detailed step-by-step instruction. So, to perform work you will need:
- Cardboard sheet;
- Compass;
- Scissors;
- Glue;
- Green threads;
- PVA glue;
- Brush for applying glue.
Article on the topic: Weaving newspapers for beginners with schemes, photos and videos
First you need to make a cardboard base in the form of a cone. To do this, you can simply roll the cardboard sheet in the form of a kulechka and trim the bottom edge:
Or take advantage of the second way specified in the Scheme:
To do this, draw a circle on a sheet of cardboard with a circulation or circle any round item (plate, cover). Next, the circle should be divided into four parts. If you want to get a low and wide Christmas tree, remove one circle sector. If the middle in height and width, the circle should be divided by half. If the Christmas tree is planned small and narrow, make it from the quarter of the circle.
Finished cone glue by side seam with glue.
The stapler is better not to use, because in the drying process, the brackets can oxidize, and the rust will paint the threads from them.
When the basis is ready, you can proceed to work. On the base, put on the cellophane package, it will be easier to remove the finished Christmas tree, because the threads can stick to the cardboard. Thread, moistened with PVA glue, arbitrarily wound on the conical base. With the help of the brush, richly lubricate the resulting glue billet. The next step is drying the product. It should be carried out in a warm and well ventilated place. Making sure that the Christmas tree was completely dry, you need to remove it from the ground. To do this, carefully screw it around your axis. Christmas tree made of threads and glue PVA is ready. It remains only to decorate it to your taste.
Second method
This method is to use a plastic cone for the manufacture of the base. You can buy it in the store of goods for creativity and needlework or make it possible from a plastic folder. The manufacture is done in the same way as the manufacture of a piece of paper. At the finished reason, make a thread moistened with PVA glue.
Additionally, lubricate the blank with glue and dry. Carefully remove from the cone. For another option, you will need a cardboard cone. If such a base wrap foil, then after drying the product is very easy to remove from the cone.
Article on the topic: Cross embroidery scheme: "Triptych Magnolia" free download
Another option
We offer you to explore a small master class for the manufacture of Topiaria in the form of a Christmas tree made of threads and glue PVA. Topiaria is an interior decoration made in the form of a small fantasy pot in a pot. To create such a craft you will need:
- Conical base of cardboard;
- Threads;
- PVA glue;
- Glue pistol;
- Scissors;
- Thick wire;
- A piece of foam;
- 22 cm lining fabric cut;
- Glass of yogurt;
- Cutting burlap;
- Sintepon;
- Building gypsum.
Make a paper cone by any way described above. Circle its base on the foam. Take the wire and pour the foam circle in the middle. Next, you need to insert the billet of the bottom and trunk in the cone. Fix glue where necessary.
To hide the ugly foam bottom, the PVA glue gently strengthen the piece of lining fabric. Wrap a brown thread trunk of the Christmas tree.
Lubricating small areas of the cone glue, wrap it with thread. Additionally, wake the glue and dry.
For making a pot, you need to cut a cup of yogurt and cover it with burlap. Next, divert building gypsum to the state of liquid sour cream. Pour it into the pot and set the Christmas tree there.
Note! It is necessary to keep it until the plaster grabs. Mill time it does not take, just a couple of minutes.
The main work is completed. Topiary, created by their own hands, will be an excellent gift for any holiday.
Video on the topic
We bring to your attention a few videos in which you can clearly see the process of manufacturing and decorating the Christmas tree of threads and glue PVA.