A warm house is comfort and comfort, to ensure that modern technique helps. The optimal solution for heating residential premises is Wall-mounted electric convector with thermostat. A constructive model consists of a metal housing and a closed heating element. The equipment complements the thermostat and the sensor. Idle equipment is well coped with the maintenance of small rooms, it is worth it for a long time and for a long time.
Basic selection criteria
When buying wall-mounted heating convectors with an electric thermostat, you need to consider specifications and operational resources. As convectors acquire for a long time, an important parameter is the high quality of the equipment. Therefore, it is impractical to navigate only on the cost of products.
Power equipment
This indicator is one of the key selection criteria. On average, the characteristics of the power of the wall electric convector with the thermostat allow you to heat the area of the room at 15 m2 by one kilowatt of electricity. This is relevant if the height of the wall does not exceed three meters. Otherwise, for every 10 cm, the height should be added to the calculation of power 10%.Important! For a small room, enough equipment per 1 kW, for a dimensional apartment or a spacious home, it is better to choose a model for 2 kW.
Types of thermostators
All electrical convectors are equipped with built-in thermostators. They "answer" for maintaining in the room comfortable for residentials of temperature. Thermostats are controlled by electronic or mechanically.
Electronic thermostat is more practical to use. With it, it is more convenient to configure the temperature parameters. In addition, the device works almost silently.
Mechanical type thermostats need to be shifted manually. Convectors with such control are cheaper, but the exact temperature is difficult, which increases the consumption of electricity.
Safety technique
Heating units that function from the mains must be absolutely safe so that people do not hit the current.
Basic requirements for electric wall heating convectors with thermostat:
- The minimum distance from the outlet is 0.8 m.
- Use indoors with high humidity with special protection.
- Proper use of equipment - convector can not be covered.
Ideally, it is worth paying attention to the model with the function of protection against overheating. When heating the room, the facial panel should remain cold so that with accidental touch, do not burn a person.
Note! It is forbidden to install convectors next to the lighted facilities. Mobile models must be equipped with tipping protection function.
Type of convection
The principle of operation of the convector heater for the house is built on the phenomenon of convection. In heated room, warm air masses rise up, and cold - lowered down. At the bottom of the device, there are special holes through which the cold air is drawn, heats up and goes up.Article on the topic: What is called, looks like a portable room heater
There are models of aggregates with natural convection, the process of which does not affect external factors, and with forced. In the second case, the air in the instrument housing is injected with built-in fans. Forced convection significantly increases the power of the convector heater for the house, but makes the heating process strongly noisy and costly in terms of electricity consumption.
Tyov Tan
Some models of heating equipment are equipped with several heating elements, which allows you to adjust the power. Other models are equipped with one source of heating. Regardless of the quantity, the tanes are:
- Needle or lintels. They are plates of dielectric material with loop-shaped chromium-skinned threads. They are covered with heat-insulating varnish, quickly heated, but "fear" moisture.
- Tubular. Made in the form of quartz tubes of the electrical convector, inside of which there is a thermal conducting insulator. Tubes are equipped with aluminum finned diffusers. Tanes are incandes for a long time, bring clicking sounds.
- Monolithic. An embodiment - in a solidized aluminum body with metal fins, a nichrome thread with a dielectric filler is placed. Ten has a high class of protection against moisture IP24, works silently, can be used in any room.
In separate models, manufacturers of wall electrical heating convectors set combined heating elements in combination with infrared radiation. They consume little energy and quickly warm the air in the rooms.
Method of installation
Heating techniques are mounted taking into account the characteristics of the room, the presence of free space and weight of the equipment. Installation is performed in three ways:
- Stationary - Installation on the wall with the help of brackets, or by the floor (plinth).
- Outdoor - the electroconvector of this type is not fixed to the floor surface, so it can be moved through rooms.
- Universal - The installation method unites two previous options. If necessary, the convector can be rolled on wheels to another room or secure stationary.
Installation option The owner of the equipment can choose at its discretion. But you need to adhere to the safety requirements for the operation of electrical equipment.
Design
Convector execution style The heater of the house meets the tendencies of modern household appliances design. Typically, heaters are made in white color, do not contain decorative elements, differ in the rigidity of the lines. This allows you to beautifully "enter" a convector with a thermostat in any interior.
Additional functions
Climatic equipment is equipped with not only room heating options. In some models of electroconvectors, useful auxiliary functions are provided:- Ionization of air, working even with a disconnected by the Ten.
- Automatic freezing protection with a decrease in temperature to + 5 ° C.
- Restart (autorun equipment) in the event of electricity interruptions.
- The heating time of the room installed by the timer.
- Turning off the convector to the thermostat when the temperature reaches the specified value.
- Automatic protection of the device from tipping.
- Air purification option.
Wall energy-saving heating convectors can be equipped with an option to automatically memorize temperature parameters. Separate models operate from remote controls. In some devices, there are heating modes "Economy" and "Comfort".
Interesting! Climate machinery is equipped with software and advanced electronics. It is easy to manage, setting up the equipment to the necessary work parameters.
How to hang on the wall
Installation of an electric convector:
- Installation on the vertical surface of the wall begins with checking the presence of fastening parts.
- The heater is turned over to the back side and unscrew the mount.
- After that, the dismantled bracket lean to the wall in the estimated place of installation and mark holes for drilling. If the surface is wooden, installation is performed on a dowel.
- Then the electric wall convector with the thermostat is hosted on the installed bracket.
- Connect the equipment to the power source and adjust the comfortable temperature.
Note! When installing, you need to observe the gaps: from the floor - 200 mm, from the wall - 200 mm, from the nearest items - 200 mm, from the outlet - 300 mm, from above and from the front side - at least half a meter.
What is the electrical energy-saving convectors
Heating design Equipment with thermostat is quite simple. The product consists of metallic (more often aluminum) housing. It placed the heating element of the closed type. The device is equipped with thermostat and sensors.
Article on the topic: Which heating batteries and heaters are better for the apartment: Overview - Comparison of all options
The principle of operation of technology is, through the perforated holes at the bottom of the convector "sucks" cold air. Ten heats it to the required temperature and "releases" up. The cycle is repeated constantly. The room heats up rather quickly, since the air flows in the room are constantly circulating.
Interesting! Unlike heating radiators that heated the rooms due to the heating of their own housing, the convector warms the air, again and again releasing it out.
How much it turns out to save, the difference in electricity consumption
Equipment efficiency with convection type of heating at home exceeds 90%. Acquire convectors economically beneficial. The devices are suitable for heating apartments, private house-building, small cottages and cottages.The optimal option is to correctly calculate the power of the unit:
1 kilowatt = 10 square meters of square
But to the resulting value you need to add the height of the ceilings, the size of the windows, the type of room layout (angular or not). On average, heating 1 sq. M. Room costs 7-10 dollars a year. With proper adjustment of the temperature, 40-80% of electricity can be saved, and it means that the total costs of heating can be saved.
Top 3 Energy Saving Convectors
Energy efficient climatic equipment is in demand. When choosing a wall electric convector, many buyers are guided by an indicator of power. The lower the energy consumption, the more economical convector.
ENSTO BETA E EPHBE10B 1000
Finnish production model consumes 1 kW power. Equipped with mechanical control and electric thermostat. There are options for protection against overheating and freezing. Installation is possible on the wall or on the floor. To prevent corrosion, the housing is made of galvanized steel, galvanized and covered with powder enamel.
Noirot Spot E3 Plus 1000
The products of the French brand differ in compact dimensions. Therefore, it is possible to install an energy-saving convector in a limited space. The model has a class of moisture protection IP 24, is characterized by high heat output and a long operational resource. Laconic design and compactness feature a device from analogs.
Polaris PCH 1001.
The convector of the Russian production in compact sizes is capable of servicing the room to 15 sq.m. at cost-effective electricity consumption. The heater can be installed on the floor or on the wall. Uniform heating of air in the room is provided by the X-shaped structure of the Tan made of aluminum alloy.
Note! In general, different models can be attributed to energy-saving instruments, the power of which does not exceed 1 kW. It is important to take into account that this value corresponds to the size of the room.
Comparison table and the choice of the best
To decide What an electric convector to choose, you need to see all the specifications of the product. On the example of three energy-saving models, it can be said that ENSTO BETA E EPHBE10B 1000 requires a lot of free space for installation. The Polaris PCH 1001 convector is able to dump the room of a large area.Article on the topic: Comparison and selection of a gas boiler for heating at home: one or two contour, outdoor, mounted
Table 1. Top 3 energy-saving convectors with thermostat
| Model | Power, W | Gabarites, mm. | Area, m2 | Min. Tever. | Max. Tever. |
| ENSTO BETA E EPHBE10B 1000 | 1000. | 853x389x85 | 6-10 | + 5 ° C | + 30 ° C |
| Noirot Spot E3 Plus 1000 | 1000. | 420x440x80 | 6-10. | + 6 ° C | + 26 ° C |
| Polaris PCH 1001. | 1000. | 460x400x84. | fifteen | — | — |
Noirot Spot E3 Plus 1000 is a compact, easy universal type unit. It has reliable protection against moisture, so suitable for heating any room.
Top 5 best wall convectors with temperature adjustment
Before choosing a wall-mounted electrical convector, it is worth familiar with the rating of the highest quality, acceptable, durable and reliable devices. Many well-known brands produce convectors with a thermostat, so they should compare their advantages and disadvantages.
Resanta OK 2000s.
The Russian company produces inexpensive convectors of Reante OK-2000s. These models are equipped with a solid housing, which protects products from mechanical damage. The assembly with the built-in thermostat is convenient to use for the heating of the cottage or private house. The air in the room is heated in 10-15 minutes.
Benefits: Affordable price, simple installation, high power.
Disadvantages: According to consumer reviews, the thermostat contacts noishes.
Hyundai H HV15 15 UI618
Compact medium power climate technique. The device can be placed on the supporting legs or install using the bracket on the wall. The unique design of the lattice increases the efficiency of the convection of the air-thermal flux. There are two power steps. Option of heating element - sty.
Benefits: Author's design, compact dimensions, high performance.
Disadvantages: The embossed panel complicates cleaning.
Neoclima Comforte 2 0
Two-chip wall Convector, despite the high capacity indicator, economically spends electricity. This is achieved thanks to the ability to configure the thermostat on the Tan turning off when the determined temperature parameter is reached. The model is equipped with built-in overheating protection, quickly heats the room, has aesthetically attractive appearance.
Benefits: Low cost, wall mounting, moisture protection case.
Disadvantages: lack of timer.
Scoole SC HT CM4 2000
The convector has compact dimensions, which allows you to perform wall mounting. The unit is suitable for dacha or at home. Thanks to the high class of moisture protection, the device can be installed in rooms with constant humidity.
Benefits: High quality assembly, maximum performance, beautiful design.
Disadvantages: No automatic shutdown.
Ballu Bec EZMR 1500
A high-performance heating device runs on the Double G FORSE heating element. Enlarged air intake with an innovative convection scheme ensures uniform warming up the room. Protection options are provided. The instrument is built in a royalty-test electronic thermostat.
Benefits: The ability to mount in rooms with high humidity, optimal power, useful functions of the type of automatic restart.
Disadvantages: No missing.
Choosing a wall-mounted electrical convector, you need to take into account many different nuances. The dimensions of the heated room have great importance, the presence of a free place for installation and architectural features of the room.
Comparison table and the choice of the best
Table 2. Top 5 electroconvectors| Model | Power, W | Gabarites, mm. | Area, m2 | Protection class |
| Resanta OK-2000С | 2000. | 900x420x80 | 25. | IP20. |
| Hyundai H HV15 15 UI618 | 1500. | 760x460x92. | eighteen | IP20. |
| Neoclima Comforte 2 0 | 2000. | 460x930x115 | twenty | IP20. |
| Scoole SC HT CM4 2000 | 2000. | 780x460x250 | twenty | IP24. |
| Ballu Bec EZMR 1500 | 1500. | 595x400x100. | twenty | IP24. |
Of the five models considered, it can be immediately noted that the first three is undesirable to mount in rooms with high humidity. Scoole SC HT CM4 2000 and Ballu BEC EZMR 1500 - Universal Convectors with a High Class Waterproofing. They are suitable for all rooms.
Electrical convectors are best suited to maintain a comfortable temperature. They quickly heat the air, economically spend electricity, do not overheat, can turn on / disconnected automatically. The choice in favor of convectors will be quite rational and deliberate.
Video Gallery
Photo Gallery
