Table of contents: [Hide]
- Some features
- Types of borders depending on the material
- Some recommendations on the process
Each person in his life seeks to make something new, individual. Also during the repair, I want to create a new interior, stick wallpaper that will be different with your originality and color colors. But sometimes the sticker of the most expensive wallpaper creates the impression of something unfounded and unfinished. The border for wallpaper with his own hands will not only solve this problem, but also will help create a cozy, warm and comfortable atmosphere in the room.
The glued border on the wallpaper adds to them originality, while creating a cozy and warm atmosphere in the room.
Some features
The border is a separate element that turns the room into something exclusive. It happens the ceiling and middle, which glues in the middle and harmoniously can connect the wallpaper of the same color, but with a different texture pattern. In terms of its qualities, they are divided into three types:
- on adhesive basis;
- self-adhesive;
- Simple.
Wallpaper curbs are produced different widths and structures.
A large selection of shades and drawings, allows you to select this finish element for any color and quality. Simple borders are glued to ordinary wallpaper glue, those that on adhesive basis, sufficiently moisten with water and stick, well, and self-adhesive - their name speaks for itself.
They can be glued anywhere, both from the floor and under the ceiling, around the door, and you can make a booze around the window opening. Still, what is it needed for? A border tape is applied if, on the advice of a designer in one room, several varieties of the wallpaper material are combined. Borders emphasize some design elements, visually can reduce or increase the room. There is one more attraction of borders who are glued in the center of the walls. Wallpaper from the bottom is rapidly faster, and if you have combined, then the bottom is very easy to replace, picking up in color.
Article on the topic: How to glazing the balcony with your own hands: Step-by-step instructions (video and photos)
The sequence of the border sticker.
Mostly it is advisable to use borders indoors with high ceilings. If the ceiling is not high, then the curb will visually reduce the room.
Bordours are usually used in the place of contact of the wall and ceiling. Their sticker is made by the final stage. They are mainly sold complete with wallpaper, an exception is a monophonic material. In this case, the border ribbon can be selected separately. They are also used if it is required to give expressiveness of any zone or highlight the game daylight.
For mounting, border tape use special adhesive mixtures that are designed specifically for the adhesive of a wobbly and mordary material. When carrying out work, to smoothly stick the tape, it is necessary to stretch the line or thread along the wall.
Back to the category
Types of borders depending on the material
There are several types of borders for wallpapers made of identical materials:- for fiberglass wallpapers;
- for textile wallpaper;
- for acrylic wallpaper;
- vinyl;
- Paper.
Paper belongs to the cheapest mind, and therefore they have a small service life. They are easy to glue and are easily removed that in the future will not be difficult to change them. Such borders are not in demand. Such a type is subject to fast burnout, they can not be washed with water, as they instantly fail. But they found their use in the premises, where they often change the interior. They produced in different structures, can be both relief and smooth, with a pattern and without.
Vinyl borders made on paper-based vinyl, are produced different density. They have a number of benefits:
- water resistance;
- strength;
- Resistance to ultraviolet rays;
- durability;
- Amenable to car wash with cleaning agents.
This type of borders and wallpapers are used in rooms with increased pollution. They can be used in the kitchen, in the bathroom, in the locker room. They are not toxic and have a porous basis, which means that the walls have access to air.
Article on the topic: Single bed do it yourself from plywood
For acrylic wallpapers, borders are similar to vinyl, but with one difference: they are not vinyl coating, but acrylic.
Borders for textile wallpapers or silk screenies give the walls the wealth of refined decoration. They are two glued layers, the bottom is dense paper, and the top is woven. They do not collect dust and possess antistatic properties.
Borders for fiberglass wallpapers are made of fiberglass threads and contain sand, soda and dolomite. Such types of borders are considered the most durable, they have resistance to fires, they can be painted, they are elastic and environmentally friendly. Have a corrugated structure.
Back to the category
Some recommendations on the process
Stick cutters for wallpaper more convenient if you cut them into pieces of equal size. Then, with the help of a special adhesive composition, glue the place. If he has an adhesive basis, then it is necessary to simply moisten with water and press the wall, well, but if self-adhesive, just dug the protective layer of paper and stick the curb to the place.
After the stickers of the borders around the perimeter, it is necessary to remove the excess glue, and on the edges (if they were poorly missed), it is good to apply glue again and grip tightly.