Every future mother is waiting for his baby with impatience, dreaming about how she will wear it in the most different clothes. Only here in our reality clothes for newborns are quite expensive, especially if we are talking about high-quality caskets and sliders.
In our master class, we want to handwriters to help sew a suit for a newborn baby, which consists of a deposit and sliders.
Here you will find patterns of sliders and sprinkle with the necessary dimensions and a complete description of each stage is built.
Spasching.
First we will tell about the dispenser, which is the necessary thing for each newborn. For inexperienced moms, we immediately note that for cuts such spills are sewn with the smell on the back, as the newborn children still do not know how to turn over. For babies, older are already comfortable, pile, which are fastened from the front to the button, or wear through the head.
As an option to use the smell in front, and the fastener can be placed not strictly in the center, and on the side. The most optimal zipper for children's clothes will be buttons, not buttons, since the latter have a habit of constantly unborn. A good option can be called a sprinkle with a clasp on the shoulder, which is convenient and unborn and unborn.
Even if you like to sew and you have a baby with a baby at this time, you do not need to put a lot of sprawers for one age, since the children are growing enough in the first year.
Another advice: Since the skin of the newborn baby is sufficient gentle, the first two or three months all the seams should be performed on the front side.
How to choose a convenient length for sprinkling you ask? To do this, measure the distance from the shoulder of the baby to his thighs, and so to get from the width of the product should be divided into the bombing circumference to two and add five to eight centimeters to free fickling. As a rule, if the baby is not more than two months, then the width of the sputum should be about 26 centimeters, and the length is 24 centimeters.
Now proceed to the lesson - how the pattern of dispensers for newborns is built. We start with a rectangle with the tops of the ABSD, whose party will be equal to half the width of the product, and hell is its length. For the neck, it follows from the top and postpone in two directions of five centimeters, which will become a depth and width of the neck. The obtained points should be connected to the smooth line of the spindup gate - this is for the front of the product. For the back, it is necessary to postpone three centimeters from the same vertex and also to spend the gate line for the rear of the sprawling.
Article on the topic: Pinds of plastic bottles: master class with photos and video
Next, the queue is for the past, for which one third part of the bustiness of the baby, plus, two centimeters should be postponed from the point in the point. On the right side of the same vertices should be postponed the length of the sleeve that can be performed at your discretion. If the sputum for winter time, then the sleeve should be long, if for summer, then shorter. As a result, we obtain the vertex B1, from which you should postpone the depth of the armor.
Do not forget to make a smooth rounding at hand, about four centimeters down and right. Thus, we got a pattern of the front of the sprawling.
For the back of the product or back from the top D to the left side, we lay a segment equal to half of the segment of the SD - the vertex D1. Then, from the resulting point, we lay a segment equal to hell minus three centimeters and connect all the points obtained as shown in the figure.
We turned out the basis of a classic sprawling, which gives the complete concept of how to sew a sprinkle on.
It should be noted that, depending on the season, the sputum can be made of fine material or thick, with closed or open handles.
Pattern of fine sprawls with open handles.
Pattern of thick sprinkle with closed handles.
Of course, depending on the forms of the kid, these patterns should be adjusted in one direction or another. Do not forget to the pattern with a string of material to add points to the seams that are equal to five millimeters. In general, one part of the front and two rear will be needed for the dispensers. They are stitched by the involving sides inside the side and shoulder seams, after which the edges can be spent.
Pants.
The following in line for sewing will be pants that need to be sewed taking into account diapers or without them. From this, the allowance for free-fitting in the hips of the baby.
Article on the topic: Flower Applique Fabric: Master Class on the sewing
It is recommended to use the tricks and sew from two halves and sets to the sliders. For non-elastic fabrics, it is mandatory in the sliders, a lastician is sewn, which will not give rise to the sliders between the legs.
Pattern for pants.
Previously, it is necessary to remove the following measurements: the length of the product, semi-coupling the waist of the baby and semi-coupling the thighs. In addition, on the waist add four centimeters to fishery freedom, and eight in the hips.
The construction of the pattern begins with the top of T, from which the length of the product will be postponed, as well as the seating depth, which is equal to the segment of TCH. From two new vertices should be postponed on the right side of two parallel lines: Shsh1 and TT1.
For the front of the pants, it follows from the top of the sh1 to the right side to postpone two centimeters.
Next, additional points are needed, for the smooth contour. From the top sh1, you should postpone two and a half centimeters and a half centimeter in the direction of the corner bisector. As a result, we obtain additional points sh3 and sh4, which with the top of the C2 should be connected using a smooth line.
Now, one centimeter should be postponed from the top of the T1 - we obtain the point T2, which must be connected to the top of T.
From the top of the n in the right side should be postponed the width of the lower part of the pants minus two centimeters. We obtain the vertex H1, which should be connected to the vertex sh2 straight line. Continuing the resulting segment for half a centimeter, we obtain the vertex H2, which should be connected to the vertex N.
Go to the back of the toddler pants.
We begin from the top of the SH2, from which the fifth part of the half-coupling of the hips should be postponed on the fifth of the semi-coupling of the hips.
We get the point sh5, from which the down to measure half a centimeter for the top of the C6, which should be combined smoothly with sh2.
Article on the topic: Cover for books with your hands under the antique of cardboard and skin
From the top of T1 on the left side, two centimeters should be postponed to get the top of T3. Connecting the straight line of the point T3 and C3, on the continuation, lay one centimeter for the vertex T4.
From the top T1 again to the left side, continuing the horizontal segment, lay one centimeter for the T5 vertex, which should then be connected to the vertex T4.
From the top of H on the left side, also by continuing the segment along the horizon, lay one centimeter to obtain the vertex H3, connecting it with the top of T5.
It should be noted that for pants with a title, about five centimeters should be added to their length on the pattern.
For pants in the style of overalls, it is additionally carried out by some detail, which is shown in the picture.
The quantity of the DS segment is within the limits of the half of the half-ups of the waist to two thirds of this value.
The magnitude of the segment AB will be equal to half the half-coupling of the waist.
The value of the EF segment is within the limits of half a half to two thirds of the distance from the waist to the shoulder of the baby.
The length of the strapless can be obtained experimentally.
We offer you the finished pattern for knitted tanks with minimal fit.
To use this pattern, you should add an allowance for seams of 0.5-0.7 centimeters on all seams, except for belt and bottom (3 cm).
The same allowances should be made for the pattern of the slider, which is given below.
Sew the slider is simple enough. Starting work follows from the sewing of the lastician one side to the front of the slider. Next, it follows, using step-down seams, to sew both the second side of the lastician. Then the side seams and the sewing of the soles of the slider are carried out. All edges of the product are recommended to be treated with overlock.
It remains to turn the top edge of the sliders for a gum for half a centimeter and on one and a half, after which it is superimposed on the edge of the machine line. We insert the gum and the sliders can be asked to the baby.