Simple homemade picnic table
The folded state is placed in a bag or bag.
Materials:
- 1 PC. Round lingon 120 centimeters long and 2 cm thick
- 3 pcs. Parquet planks, 5 x 0.6 x 20 cm
- 1 PC. Parquet board, 2.5 x 0.6 x 20 cm
- 4 things. Transport bolts
- 4 things. Brass rifle nuts inserts
- Nylon flat cord, 10 x 2.5 cm
- Staples, 6 millimeters
Despite the fact that all stages are shown in detail in the drawings, some explanations are required for the stages of work.
Progress:
one). Split round lump into four equal parts (the length is selected depending on the required height of the table).
2). Cut the 5-centimeter reduction to pieces of 60 cm each. It will be necessary only 10 dorshek. For greater accuracy, you can hold in vice.
3). We process the edges of sandpaper as in the pictures.
four). Cut off 2 pieces of braids for 60 cm. The edges are slightly falling off with a flame of lighters, so that they would not be attacked later.
five). We fasten the table top with a braid with a bracket. Put the tabletop tabletop with the invalid side, as it will be the future bottom table top. As a separator, you can use any identical cutting of skimps.
6). We drill holes in extreme does.
7). 2.5-centimeter plates have across the table top. After that, we note for yourself the location of the center and we turn in the place of the hole with a size of 6 mm. These planks are a retainer, they make a tabletop durable and not allowed to stretch the nylon braid. After that, make sure that the bolts are normally included in the holes.
eight). Install fixing strips.
nine). We make legs. With the help of the caliper, carefully mark the middle of one of the cuts of the round bar. Hold it in the vice and drill the hole with a 7 mm drill to a depth of 25 mm. Before you put a bar in vice, be sure to wrap it with cardboard. Thus, the pressure will decrease and the vice will not be able to damage the bar. Keep a bar with hands during drilling dangerous.
Article on the topic: How to breed fish in a pond at the cottage, what fish is better to breed?
10). Install the threaded nuts insert. You will be attentive, these small brass threaded inserts turn out to be a very delicate thing. They are very difficult to install perfectly straight.
eleven). We collect the table.
12). As a coating, you can use olive, varnish, etc.
Ready product. It turned out a cool table for leaving picnics and rest.