The windows are an essential component of any room. Every year, more and more new products appear on the market, and one is better than another. The last invention is euro windows. To date, plastic uses the most popular for the manufacture of window frames. After all, this material is quite lightweight and easy to install. And the wooden euro windows only gradually enter into use by virtue of its high cost.
Wooden euro windows have a lot of advantages: environmental friendliness, naturalness, safety, attractive appearance. However, a considerable amount will be required and put them.
But in the modern world, people still prefer if we install wooden windows, then according to Eurostandards. After all, such structures are much more convenient to use, and the life of their operation is much higher. And the deformation process is very slow and virtually unnoticed. But make wooden eurowindows with their own hands much cheaper than buying a ready-made frame.
Advantages of a wooden window before plastic
Before considering the principle of manufacturing this type of frames, it is advisable to figure out what the advantage of wooden Eurocon in front of plastic. After all, in addition to the environmental friendliness and naturalness of the material, there are some more important characteristics that put the tree to the fore.
Advantages of wooden windows.
- Ease of repair. It is believed to repair plastic double-glazed windows or unreal, or quite difficult. Of course, it all depends on the type of breakage. But still wooden windows are easier to repair. And, in contrast to plastic, during repair, the minimum risk of cracking.
- Decorativeness. First, the tree looks much more beautiful than plastic. And even if the plastic window is done under the tree, it will never be compared with the real wooden window. Secondly, on a wooden window is always less noticeable dirt.
- The main advantage is the lack of excretion of harmful substances when changes in temperature modes. It is also not necessary to worry about changing the size of the frame. Of course, the tree has a fabulous property and expand, but if it is properly installed, this happens unnoticed.
Article on the topic: Wallpaper under the brick: masonry wall, photo in the interior, white, imitation in the form of masonry, under painting with a pattern, textured vinyl, is it possible to glue, video
So, the main advantages of plastic in front of the tree are considered. It is possible to add here that in Evrooken, like in plastic, there are anti-mosquito nets, several opening modes, as well as the ability to choose the mount.
Now is the time to move to the consideration of the frame manufacturing process.
We describe it briefly so you can understand for yourself, if you do it correctly.
Preparation of a bar for a wooden frame
The first stage will be the manufacture and preparation for the installation of a bar - the main material for the window frame. First, the frames are made, which is better to do with the involvement of specialists, as you cannot predict the necessary gaps yourself, after that the dimensions are already applied directly on wood and cut down. It is useful to know such basic rules for the preparation of a bar for eurowinda of wood:
Scheme of measurements of the window opening.
- For euroowna, you need to choose a wooden lamination with humidity at a level of 12%. At the same time, it is best to choose such woods such as oak, beech, rhine or some coniferous. As a rule, these trees are the most persistent and high-quality for such structures.
- Specialists in finishing windows advise not to use for frames of whole pieces of timber. The best option will build a timber from several boards (in 3 or 4 layers) that need to be glued. Moreover, it is necessary to glue so that each board the fibers differ from the direction of the previous layer.
- The most important point is the presence of a protective coating on a wooden window frame. Protective layers are applied to the bar before its installation in the opening. For this, antiseptics and impregnations are applied. But the decorative coating should be applied after installation.
Installation of fittings, glass and frame installation
Accessories for windows.
The next stage of the framework of the frame with their own hands is the preparation and installation of the fasteners bruus. First, all the necessary fittings are bought. These are fasteners for folding and opening the window, for fixing the adjoining frame to the impact, and another special seal, which is stacked inside each bar to exclude the stains of the wind and getting precipitation.
Article on the topic: Wallpapers for a small room visually increasing space: photo, how to choose, help in the interior, what color, small, suitable, video
Many prefer first neglect the sealer to save money and time. But it is completely wrong. After all, in contrast to plastic windows, where a special sealing rubber is usually mounted in a frame, in a wooden window its absence can lead to insufficient sound insulation. The design carries out the jigsaw of the groove, where the seal is then stacked.
As for other attachment elements, their number is calculated by you independently and depends entirely on how much you want latches to have on the frame. For this type of fittings you need to do special notes.
Wooden eurocon design scheme.
But they need to count very carefully, based on the already purchased fittings. Accessories are mounted using a screwdriver on specially selected screws, bolts or self-tapping screws.
So, after that it is necessary to insert glass in the frame. For him, you will have to make the groove in advance, again, depending on the thickness of the glass. For double-glazed windows from expensive wood breeds, it is advisable to use not the usual fragile glass (even if it is rather thick), but specially processed, which is not so easy to smash.
After inserting the glass, it remains gently to mount the glass in the opening, fixing it with special fasteners, and then close the cracks between the wall and the frame with the help of a construction and assembly foam. When the foam freezes, give the window to stand, after which you can cover it with varnish or paint.
Now, after considering the overall process, you can decide whether there are wooden eurowindows on your own.