The ability to upload their creativity to entertain little viewers is not given to everyone. Along with the acting game, the skills of the scene and character characters are also valued. How would it be nice to entertain children in the habitual setting for them, arranged a few theatrical magic. And the most valuable will be the creation of not only its own scenario, but also the design of the puppet theater with their own hands.
Materials for creating
The foundation of the puppet theater is the scene on which all the action will occur. Scene and screen can be made in several ways. The simplest scene is from the fabric. A large segment of the fabric worshides the doorway, the horizontal slot is done in the fabric, in which they will peak during the performance.
It is also easy to build a scene from chairs or stools. Two stools put back apart from each other, the seats are walked to the floor with a cloth, and in the distant edges of the backs stretched on the rope or rubber band fabric - the back of the scene, from under which they will look out of the dolls. From stools such a design is as follows: three stools in a row, two on the sides on this row. The fabric is laid in the same way.
Cardboard scene is performed using boxes. You can either glue it out of several boxes or make from one. Several boxes suggest a laid out of them, as from bricks, a full-fledged theater frame with a window, which is later watched with cloth and curtains. One large box should be eliminated from the folding parts and two walls to get a fragment of cardboard with P-shaped bends. In the bottom of the box, it should be made a rectangular hole, and the remaining walls are fixed in the corner position so that the box can stand with folding and gluing in places of folding small square cylinders that will interfere with the box to work out. Such a scene is easy to arrange with colored paper or wallpaper.
Article on the topic: Tunic with whole-circuit sleeves: master class on sewing without pattern
The puppet theater in kindergarten requires a more decent species, so it is best to make it from plywood.
Scene from plywood
To create this type of puppet scene with shirma, communication skills will be required with saw and rifle screws.
In general, the following materials and tools are needed:
- plywood or two sheets with dimensions of 750 × 500 cm and 500 × 400 cm, or one sheet of 750 × 900 cm in size;
- Little saw;
- 4 loops for the door, the corresponding number of screws to them, a screwdriver or screwdriver;
- hammer and several nails;
- Fabric, rubber band or lace, needle with threads.
Fanora must be flashed and cut into parts shown in the diagram:
If necessary, the details can be painted or saked by wallpaper. After that, they need to be collected by connecting loops for the door. From the fabric we make two rectangular segments in the size of the window, from which it is cling to a rubber band or lace and we are wearing the curtain. The edges of the rope are nailed on the screen with nails and a hammer. Shirma is ready.
Characters for theater
Paper dolls are most often used in fingering puppet theater or fasten on spiners. Taurus for finger theater is made of paper fragments glued to cones, and flat dolls from appliqués on cardboard are joined on the ships. The following are templates for paper characters fairy tale "Teremok":
Self-timers from disks are suitable for performing the heroes of the cartoon "Smeshariki" in the puppet theater. For one mixing, a disc, plastic plug from sweet water, plasticine, skewer, pattern, markers or pencils, glue. Character templates are given below:
If it is not possible to print on a color printer, you will need to paint patterns. Next, it should be glued to a disk that sits in a special cutting tube from above, inside which plasticine is placed. In this cork, the sinking joins, and the doll is ready.
It should be paid to the fact that individual parts of the templates, such as ears, horns, tails, it is better to glue on the cardboard, and then on the disk.
Dolls can be made of tissue, not even resorting to the pattern of their parts. For dolls of socks, it is better to choose bright unnecessary socks from dense tissue. You will also need two cotton balls, thin gauze or bandage, two black beads or buttons, bubo from knitting threads, an oval segment of fabric, needles and threads.
Article on the topic: We sew the napkin for bread
Cotton balls are wound into the gauze, twist at the end and tie a nodule or threads. On them, in the opposite side of the side, we climb the buttons. So it turns out eyes for the doll. The end of the sock is cut along the seam where, in the twisted state, sew a round segment of the fabric. So it turns out the Taurus doll and mouth. Above the mouth sew your eyes whose nodules are covered with an arched bribon playing the role of hair. You can also add other decorative elements.
Glove actors - transition to a more professional theater. For such a doll, you need a pair of gloves, scissors, buttons, a bubo or fluffy pomponchik, threads with a needle in color gloves, embroidery threads or other contrasting with color gloves, cotton wool or other printed material. Very common doll from gloves in the form of a hare. From the same gloves we make a head, cutting such "fingers", like a little finger, nameless and big. The remaining ears. Detail form a rounded, stitching on the twist, then stuff your cotton. In the second glove, we leave the little finger and the thumb outside, and the other three do in the detail of the head and sew together. After that, we sew a hare of the eye, a chub from the bubon, embroider the mouth, and should turn out the doll, as in the photo:
Video on the topic
Video to create elements of the puppet theater: