Sew the Greek-style dress offers Anna Gerasimov in his master class, which also has a pattern of a Greek dress. Free style of dresses and lightweight material will be rescued in a hot summer heat, and a specific cooling will allow to emphasize the beauty of the female figure and hide disadvantages.
The most suitable material for the Greek dress is a batter, but you should not focus only on it. It is quite possible to use any soft fabrics, among which it is worth named viscose staple, natural silk, etc.
So, how to sew a Greek dress with your own hands. For this model, you will need about three meters of sixty centimeters of the fabric, the width of which one meter is forty centimeters. You will also need a lining fabric, which will be perfectly looking for a monophonic batist. It should be taken about two and a half meters. In addition, it is necessary to prepare an elastic braid, phlizelin and several buttons.
The presented pattern of the Greek dress is designed for forty-second size. If necessary, the dimensions can be changed in one direction or another.
We cut four parts of the front of the product, two details of the rear, having a fold, two parts of the hem bend, four parts of the faces for the arm and neck (86x4 cm), oblique beyk for mounted loops (36 cm), two parts for belt (60x10 cm) , as well as from the lining, two details of the bend bend.
Be sure to add an allowance for seams in the amount of one and a half centimeters, and the premiums and the neck must be immediately sampled by phlizelin.
The sewing process begins with the top of the dress or bodice. For this, there are brachial seams on the main material and lining. Then all parts of the top of the dresses should be connected to each other with an outfit and strain along the trace and neck. For a better fit, the allowance should be laid, it is detail to twist and thoroughly smooth out.
Article on the topic: Autumn compositions do it yourself from natural material
Go to Beyk, for what, in two places, we lay the line and we climb them. Baika should be sewed to the edges of the arm and the neck at a distance of two centimeters from the edge, applying to the dress with an invalid side. After the faces are sewn, their edges are stitched on the back.
The second edge of the beaks should be adjusted on the wrong side of the product to sew, using manual seam.
We proceed to the front of the dress. In this case, we are talking about mounted loops from oblique beaks, which in the amount of six pieces will be located on the right shelf. We sew seams in the center, and the allowance should be smoothed towards the right detail. In this case, it will be imitation of the clasp, which in the idea can not be done.
For the bottom of the dress, the edge of the heater should be assigned to its upper edge to the size of the lower edge of the leaf. Also, the lining part of the hem should be sewed to the inner parts of the upper part of the product. All side seams should remain open.
Next, the junction of the hem and the lift should be fed up with a decorative braid or can be made a line with a bobbing rubber.
To complete the process, it remains only to sew a belt that should be started with the processing of parts on the edges. Then the belt parts should be put in the side seams of the product in the assemblies area and sew. You should also sew the side edges of the base of the main and lining material, but it is necessary to do this separately.
It remains to handle the bottom of the bottom of the dress and it is ready to fit!