Parking. Construction of a house in a taiga for hunters
Here is our old and so native Polyana, where our first residential building stood. The place has already grown up the young threshold and we have already had to cut down a rapid pool. Five years ago I had to produce a total ass, getting rid of thin stiff burtures that grew up with me with the growth and walked all the free space in the glade.
Started July 25, 2009. In two days cleared the place and put the salary - the first crown, the foundation of the entire future construction site
Prepared Brenna for several future crowns, sawed in size, Okrilly. Before leaving, put another pollen.
There were days when it was raining in the morning and before the evening - sometimes drizzling, and sometimes shower. Then we threw more firewoods to the fire, so that you could come from time to time and getting it, they put on a chemical protection raincoat and worked on.
In the rain, the performance of our work fell at times. Raincoats did not significantly rescue from the ubiquitous moisture. Brica were slippery and resembled large slices of soap. It happened that the day did only half avent. Well, the mood was under the weather - gloomy. But the construction nevertheless continued. Already stuck sex. Slowly but the crowns grew by one for one. And now the outlines of the future hut are already visible (with Max in our language, they called this "outlines drawn"). In such an approximately context: "Well, already some contours are drawn!"
Near the roofing work. We design and collect the roof of our future dwelling. On earth, it is much easier to prepare the design and more convenient than in place, we invent construction in the course of construction.
The following photo is so-called damn. This is the second to significantly our tool after chainsaws. They did it themselves (or rather did Max). In stores I have never seen anything like that, it is needed for marking logs for the selection of longitudinal grooves.
Article on the topic: Suspensions for plasterboard, which option to choose
In the title of the tool already laid its purpose. The feature is birching. Brica is not an ideal form, despite the seeming roundness and the correctness of the form, they have bugs, pumped, irregularities from cut bitch. The line spent on two businesses marks all the irregularities and bends, and if you cut the groove on correctly birching, they will lie tightly on each other, without leaving the gaps.
The above-mentioned log should be put on the place where it will later be located, fix it, so as not to play, did not swing and not let God have fallen. The more accurately they are birching, the less work will then with their fit to each other. Therefore, it is not necessary to hurry. It happens, of course, that even a diligently embarrassed log later, nicknames do not want to go to his place and you can spend half a day on his fit. And it happens and vice versa - it was hidden, and it fell as if everything was there. After the log is threatened, it needs to be removed, turn over with our stamps up, and choose a chainsaw. First sawing along, making from three to five longitudinal cuts (depending on the thickness of the log).
Then drink across, here the number of cuts is unlimited. The more often transverse cuts, the easier it will then be to choose the groove.
Choose a groove ax, first need to knock out all the "cubes", which have been wrinkled. And then it is cleaned and adjust, to grab the groove. (To my great regret, the photo of the logs with the selected groove was not preserved). Then the log swallow and put on the log house, on which the log on which was bred, without forgetting before it put on the bottom log moss, it is better wet.
Now I will make a small lyrical digression that I dedicate to the boards. Boards ... oh, it is probably the most difficult part of the construction. There are no roads to winter. Brought to the forest carrier to an abandoned career. And then about 2 km - on yourself. There were 65 boards. Of these, 17 fortifications and 48 inches. Boards 3rd grade, raw and heavy. Were so: first 1 fortification + 1 inches (17 walker). Then they drag out all the inches, three boards at a time (10 walker). They wore three days, also the fourth convicted a little.
Article on the topic: What pick up a dense cloth for curtains - velor or cotton?
Well, the log house is finally raised. Stop ceiling, rafters are exhibited. EVERYTHING CURRENT AND CURRENT "Draw out contours."
It's time to cut the window on the opening. By the way, the frame with glass found on an abandoned career. So the discovery was adjusted by the size of the found frame.
The boards were sewn, it is necessary on this side of the roof Ruberoid to sharpen. I stand and think how convenient it will be done. I say Julia: "We'll probably have a staircase, it will not work without it." In general, while I thought I did not notice how my wife climbed onto the roof and shouts to me from there so that the referee. "We have," says, it will take half a day on the staircase, and the referee can be seized.
In general, I did not expect such construction talents in it. Yes, so deftly it turned out. She pounded, nailed, and I was so, on pickup, as in that prompt - bring, feed, went to FIG, do not bother! (joke).
We bring the last gloss, eliminate small defects. In one place broke the rubberoid when wept. Most likely in that store where we bought it, he was kept lying. I had to close the hole. To do this, a piece of rubberoid is tagged and kicked it with hot gudron.
But the most solemn moment is the first flooding stove. Everything - wintering came to life, breathed. Here is another taedle hut more became more. The sacrament has happened ...
Winter built. And I finish my story. I will sum up. Built from July 25, 2009 to August 23, 2009. For almost a month, it is with breaks. In general, on the rack left the full 14 days. It was possible to build and faster, but the rains were greatly interfered, taking the pace of work on no.
In addition, 4 days out of 14 we wore boards and other materials. Consolidated 10 liters of 92th gasoline and 10 liters of oil for the chain. It took building materials: the "Inch" board 3rd grade - 48 pieces, the board "Sorokovka" 3rd grade - 17 pieces, rubberoid - 2 rolls, insulation "Erveyant" - 1 roll, well, and small things - nails of different "calibers" , door handles, hooks, brackets, and tools - axes, colongs, nails other.
We came to wintering in the evening. We booked tea, melted the stove in the hut. At night, they thought a little with the help of an outbreak. So our winter looks from the inside.
Article on the topic: How beautiful to make curtains: step by step instruction
Flakes flooded, divided the fire, boiled tea. Yulka, drinking another pill from the flu, faced for a few minutes. In the end, I slept almost all day. I won't wake her - let him sleep. During this time, the door and door frame insulated the felt strips. Nasolol firewood. I did everything without a fuss, it does not hurt anywhere. But the most important thing - insulated the gap of the place where the pipe passes through the ceiling. On one hunting forum, the Council asked how best to do, many and in the case responded. But chose the Dmitry Council (om_babai) as the easiest. Here are photos of how it was and how it became:
