Make beautiful vases can be almost from anything. Therefore, today we offer to your attention a master class on a vase from gypsum with your own hands.
Gypsum is quite a fatty material from which you can make anything. Gypsum vases will look stylish and elegant, decorating your interior, or become a wonderful gift for any celebration. After all, as you know, the best gift is a gift made by your own hands. And if there is also a gift that is also so practical as a vase, then there are no extra words!
Let's look at a few master classes to create interesting gypsum VAZ with their own hands.
Gypsum VAZochka
In order to make such a gypsum vase, take:
- 2 liter plastic bottle;
- gypsum;
- Gypsum putty;
- Bandages.
Getting Started, first closing the surface of the table (or another working surface on which you will do a vase) cellophane or food film. It must be done so that after the end of the work plaster it was easier to remove.
Gypsum wept with water to the consistency of thick sour cream, wait until it grab a little. Then lay out the circle - it will be the bottom of the vase. From above on this circle, we put the bottle and begin to apply the gypsum.
Note! Work will have to work fairly quickly, as the gypsum has a property quickly harden.
Now wrapped with a plated gypsum bandages, leave for about 30 minutes to the gypsum drop. It is necessary to be sealed with plaster and bandages just above the middle so that later you can easily pull the bottle.
Next we divorce the plaster putty and apply it over the bands. Then a layer of bandages, and again layer putty. The lower part of the vase is ready. For the top you can take an extra form, for example, a plastic jar.
Article on the topic: Veil or Organza - What tulle is better?
The upper part of the vase form the same method - a layer of bandage, putty, a layer of bandage and a layer of putty. In order for the vase to be solid and stable, you can apply a few more layers of putty, and after complete drying to sand sandpaper.
Gypsum blank We send to dry on a day in a warm place. For staining of the gypsum vase, you can use acrylic or varnish paints.
Carton boxes
Throwing out a box from under the juice, few people think that with its help you can make an excellent vase or a flower pot.
We need:
- juice box;
- gypsum;
- brushes;
- Plastic cup or other capacitance of such a depth you want to get a hole in a vase;
- acrylic paints.
Cut the box so that the cardboard blank Vase you need the height you need. Gypsum dug up to the consistency of thick sour cream and pour into the box.
While the plaster does not frozen, place the cup inside the box with a plaster, forming a hole for plants.
Let's leave the Vase until complete drying. Then carefully remove the box and take a cup. Sandpaper is sanding the surface. Vase is almost ready, it remains only to decorate it.
We chose a method of applying paint with a lace stencil. To do this, they took lace tapes and secured them on the plaster billet.
Spray-paint cover the entire surface of the vase, you can also cover the inner part. Let us completely dry the paint and remove the lace ribbons.
Such a vase can be used as a pot for succulents or, if you made a deep hole, put flowers into it.
Another option
This master class is a bit more difficult, but nevertheless, it is very interesting to make such a vase, but it will look in the interior just gorgeous!
To work, we will need:
- gypsum;
- plasticine;
- twine;
- Filling form (you can use the form for baking suitable shape and size);
- Shells (you can use any small details).
Article on the topic: how to sew a bag with a tissue valve with your own hands: Pattern with description
Match for pouring cover paper for baking. Plasticine rolling the sausage and roll over the size of the shape and, accordingly, the future walls of the vase. We divorce plaster to the state of thick sour cream.
On the plasticine we make seasheck prints, then put it in the mold. We fill with plaster by 3-4 cm. Total will need 5 walls for the vase (you can make both triangular and rectangular shapes).
While the gypsum was not fully frozen, after about 10-15 minutes it should be accurately taken out of the form. Ready future vase walls leave until complete drying.
When the tiles were dried, you need to drill holes on the sides. We connect the tiles and tightly link them with the twine.
We put the collected design vertically, and the bottom is poured by plaster. After 15-20 minutes, we remove the walls, the bottom in the form of the vase, we leave until complete drying. Drill holes in it to connect with the walls.
Now you need to paint all the details. You can use acrylic paints of any colors. And you can use undergraduate tools. For example, such a color of the vase, as in the photo, it turns out if you mix the cream for shoes with vegetable oil.
Then all the parts are covered with varnish and link the twine.
Of course, in such a vase, you do not need to pour water, but you can put a small glass or plastic container into it so that fresh bouquets can be put in a vase.
Thus, make vases from the gypsum quite easily, even a child can cope with it. Of course, under the supervision of adults. The main thing is to show fantasy and the desire to get the original vase.
Video on the topic
See also the videos in which the principle of manufacturing gypsum VAZ and flower pots is explained.