The roof is constantly susceptible to the negative effects of the sun, moisture. She can suffer from falling branches, strong wind gusts. To this not happen, it is necessary to competently refer to the selection of the material. In recent years, metal tile has been greatly popular. Steel sheets are produced in different colors, can be slightly wavy, with a pronounced relief.
Structure of metal tile: what to consider when choosing
The cost of metal tiles begins from 90 hryvnia per m2. The structure of different types of roofing material is almost identical. Only thickness and number of coating layers differ. In any case, a sheet galvanized steel is as the basis. It is treated with a thin oxide film, primer polymer paint.
The first thing to pay attention to when choosing is the thickness of the steel sheet. Tile at 0, 4 mm is too thin and flexible. It is not intended for high loads. A small bowl of snow is capable of deforming the metal. It is possible only for the formation of visors or canopies.
Metal tile of 0.45 mm has an optimal value for money. You can use this material in the regions with calm climatic and weather conditions - without intense snowfalls, hail, strong winds.
Metal tile for residential buildings should have at the base of a sheet of 0.5 mm. It is characterized by high strength, is characterized by a stable geometry, saves stiffness and is not deformed. On the site https://skrovlya.kiev.ua/metallocherepitsa/ You can buy such metal tile at a bargain price.
Important! Manufacturers indicate in the description of the material thickness of the steel sheet. Its actual indicators should be larger, because the metal base is covered by several protective and decorative layers.
To make sure the roof, you need to ask for a documentary confirmation.
Popular types of metal tile
Buying roofing material, many consumers put on the first place its design. Among the most popular:
- Monterrey. The profile height is 77 mm. Thanks to 3D cut, horizontal joints remain almost invisible.
Article on the topic: Hearth Cottage with foam: "For" and "against"
- RETRO. Relief resembles a mountain range. It is ideal for a terrain with high wind loads.
- Maxim. A symmetrical profile with a edged edge resembles the roof of vintage locks. From other species, this material is distinguished by increased resistance to negative temperatures and ultraviolet.
- Premium. The relief imitates natural ceramic tile. It is often used during the reconstruction of old buildings.
- Supermonterrey. Reminds the previous type, but has a greater height of the waves. This increases the volume of structures and makes them more expressive.
- MAXI. The steps of this profile have a length of 400 mm. This makes it universal in terms of coverage of large and small areas.
For the right choice, you need to get acquainted not only with the samples of the roof, but also with ready-made projects that allow you to evaluate the full effect and beauty of metal tile of one or another type.
