In this master class, we will imitate real amber with insects inside. Options for using the finished product - set. In this case, he was a decor of the handle of canes. With the same success of the workpiece, you can make other crafts and souvenirs.
Materials
To imitate Yantar with your own hands, prepare:
- pieces of plywood;
- composition for polyester resin;
- dye to give a succulent shade;
- MDF unit;
- composition for the preparation of silicone;
- Scotch;
- dried insect;
- Food film;
- sandpaper;
- lathe;
- saw
- sharp tools to give the shape of the product;
- Protective gloves.
Step 1 . Initially, you will need to make a form for casting blanks. To do this, take the MDF block suitable for you.
Step 2. . From the residues of sawn timber or plywood make a box. The walls of it are attached to each other in scotch and watch the lumens between them.
Step 3. . Inside the resulting box, we remove the piece of MDF. Stick it for reliable fixation. If you want the form to turn out perfectly smooth, wrap MDF Food Film. So Silicone will definitely not stick to the tree.
Step 4. . Instruct Silicon in accordance with the manufacturer's instructions. Fill it into the box. Leave everything to the complete drying of the silicone. Time for it will be needed about 24 hours.
Step 5. . With the help of water and measuring cup, measure the volume of your form to understand how much polyester resin will need for the manufacture of one product.
Step 6. . Divide the polyester resin in accordance with the manufacturer's instructions. Do not forget to add a dye to get an amber shade.
Step 7. . Divided the resulting resin volume into two parts. First fill in the form. Pour neatly, without scolding so that bubbles are not formed. When working with epoxy resin, it is possible to get rid of them with the help of a burner, but the polyester at the same attempt will simply light up.
Article on the topic: Manica for a man with knitting needles: Scheme for beginners with photos and video
Step 8. . Lifting the resin in the form to stand for 30 - 60 minutes so that it thickens, send the selected dried insect to it. In this case, it was a large size of the merchandise. So that he remained the whole, he was lying alive, put in a jar with a wrap, moistened in the solvent, and waited until he was dragging completely.
Step 9. . Fill the second layer of resin. Leave everything to the complete drying of the workpiece.
Step 10. . Now the workpiece must be given a form. You can do it manually. In this case, a lathe was used. In any version of work, the tools for trimming and fitting the workpiece in shape should be very sharp. Polyester resin In this regard, the material is capricious and fragile.
Step 11. . Carefully polish your homemade. For convenience, moisten the resulting figure with water and after processing sandpaper or grinding nozzles.
At the end of the process, polish the product.
Ready!