The homemade stand for the monitor during the breakdown of the original can do you to do in court penny. For the manufacture of a stand for a monitor with your own hands, you will need rebel. Especially well, if any remained after repair.
Materials
- 1 piece of plywood, 18 mm, 48 x 8.5 cm;
- 2 pieces of plywood, 18 mm, 8.5 x 8.5 cm;
- MDF, 18 mm, 12 x 12 cm;
- bolts;
- washers;
- self-tapping screw;
- glue;
- organit.
Step 1 . First you need to decide on the size of the stand. In this case, all calculations have already been made. It is possible that you will have to be corrected. To determine the dimensions of the future stand, use pencil, paper and organitis, applying them and specifying the correctness of our own calculations.
A piece of MDF fasten to the main stand stand using a screws.
Step 2. . In one of the pieces of plywood 8.5 x 8.5 cm Make two holes under the washers. Faneru in this project is less than the specified thickness do not take. She simply may not withstand loads and break.
Step 3. . Measure the height of the table top on which the monitor stand will be installed. One piece of plywood with holes fasten at the base of the rack, and the second one at the distance equal to the height of the table top. Carnat pieces of plywood you can simply with durable joinery glue. In this case, grooves for screws were made for reliability.
Step 4. . Inserted two werehers in the previous holes, screw the bolts in them. The washers will allow the stand to be fastened more reliable, the bolts will be dried into it, not allowing the monitor rack to fall out.
Step 5. . Secure the monitor itself to the stand. To do this, use M4 bolts up to 10 mm. Such bolts are universal and are suitable for most monitors.
Stand for the monitor is ready, you can mount it to the table. Adjust the installation strength bolts.
Article on the topic: Postcard on February 14 with your own hands beloved in the technique of scrapbooking
