After installing plastic windows, it is necessary to provide installation of suitable blinds that allow you to create optimal natural lighting in rooms with any weather outside the window.
But for the proper installation and selection of the structure, you need to know how to measure the blinds on plastic windows yourself.
These knowledge will help save finances on the work of the construction team or purchase a more expensive blind model.
Choosing a suitable type of blinds
Perform a measurement under the installation site and determine their dimensions can be possible only after the appropriate type has been selected, from which many nuances depend on the measurement methods. Some people are mostly focused on decorative properties and ease of operation, which, in general, correctly, it is worth noting the fact that the complexity of their installation may differ at times.
Roman curtains are great for apartment residential areas
Therefore, it is worth choosing such structures that satisfy all the requirements of the room design, but it is possible to install them with your own hands. Manufacturers offer such types of designs for the internal installation:
- classic option with a horizontal or vertical location of the lamellas;
- rolled;
- Roman curtains;
- Pliste.
The first and second options are optimal and inexpensive, so if there is no measurement experience and installation, they are ideal. It is easy to carry out measurements simply, they are undemanding in operation and quite maintainable. If you want to create a unique design, then the other options are suitable.
Determine the method of fastening
Before measuring the window, you need to decide on the method of fastening the design being installed.
If you follow the instructions, you can mount curtains in minutes
To do this, you can use the following recommendations:
- The vertical mount can be performed inside the loop or directly to the wall, depending on how the plastic window was installed.
- Vertical designs should be attached so that the floor has a minimum distance of more than 50 mm.
- If the blinds are planned to establish a mustache with the window opening, then it is necessary to be prepared for the fact that part of the windowsill will be occupied by its design.
- When the vertical design is attached, the width is selected so that the canvas performed outside the window at least 15 cm.
Article on the topic: Restoration of the coffee table do it yourself in modern style
The fastening in the window pass should be carried out so that the window sill is not going on, that is, it is necessary to make an indent in a height of 20 mm. It is necessary to determine in advance the side of the opening of the blinds and choose the mechanism.
The process of measuring the sizes of the blinds for plastic windows
Steel tape measure allow measurements with high accuracy
Completely merge the blinds - it means to choose a suitable tool, correctly select the desired design and decide on the installation site, and then perform the necessary steps of measurements.
Measure all the necessary linear dimensions is important only using steel roulette, since only it is capable of providing the desired accuracy.
The use of other measuring instruments can later create significant problems, as even 1 mm in a large or smaller side is enough for this error to be visible throughout the life of the window.
Measurement of horizontal or vertical shutters
Before measuring blinds on plastic windows, one of the ways to install the blinds should be selected:- In the opening. The method is effective for mounting on the deaf windows with non-disconnecting sash.
- On top of the goat. The implementation of the method is similar to the first case.
- On the window sash. The method is suitable for a solid glass or window with a single glass installed.
- Inside the window.
Measurements to install blinds in the opening
When measurements, perform at least 2-3 width measurements to be confident exactly
You can measure the blinds for installation in the window can be in such a sequence:
- Roulette measure the dimensions of the window turnout at several points (at least three) for each linear size to eliminate the situation with the uneven opening.
- If the windows are found in width or height, then the smallest of the smallest values are selected.
- From the width of the openness, we take 10 mm, and the height of the side is equal to the height of the canvas.
- We take into account the presence of open flaps and correct the dimensions so that the window in the open state does not hurt the coarse cloth.
- Consider the location of the control bodies and make appropriate adjustments.
To select the dimensions finally and with doubts about the measurements carried out, it is recommended to make a sketch on a comfortable scale and apply all structural elements on it.
Measurement of the sizes of blinds for mounting over the open
Installing the design over the openness is very simple, as it is easy to measure the necessary dimensions that simply and it is almost impossible to allow any errors. Therefore, this method of installation is one of the common.
Article on the topic: Choose colors of siding to cover at home
Blinds on top of the opening look beautiful and are element of decor
The measurement process is performed as follows:
- We measure the window through the width and height.
- To determine the width of the canvas, add 20 mm to the measured value.
- It is possible to calculate the height of the design only by adding to the measured value of the height of 50 mm, which, in fact, and do.
- We introduce amendments to the position of the controls and the design itself in the turning form.
Conduct measurements for installation of blinds between sash
Pick up the sizes of blinds to install them between the windows sash is quite difficult. Therefore, it is important to perform the correct measurements whose sequence is as follows:- We measure the dimensions of the visible part of the glass inserted into the frame, without taking into account the strokes.
- When disconsets or irregularities are detected, choose a smaller size value, and perform measurements at several points.
- The size of the canvas formed by the lamellas, we determine by adding to the measured values of 10 mm to height and width.
- The selected size should take into account the location of the blinds in the twisted form and at the same time do not interfere with the opening of the window sash.
We recommend to watch the video on how to measure the distances for mounting the blinds to separate sash.
Perform measurements for installation inside the window
Installation of blinds inside the window is possible only if there is a proper geometry of window frames and the possibility of removal of control bodies from the blinds. That is, the plastic window frame must be specifically designed under this type of blind. In most cases, the window design does not provide for the presence of opening flaps.
The sequence of actions to determine the size of the canvas as follows:
- Tape measure measure the height and width of the visible piece of glass, including the strokes.
- We determine the presence of curvature in the frame plane and make a decision on the possibility of installing the blinds.
- From the measured window height, we submit the height of the structure for fastening the web, which stands out beyond the position of the upper headquarters. To the resulting value, add 30 mm and we obtain the desired length of the length of the canvas.
- The width of the canvas should be equal to the measured window width along with the strokes.
Article on the topic: Stencils for wall decor (55 photos)
Look at the video how to install curtains to the inside of the window opening.
It is necessary to take into account the correct location of the controls of the lamellas of the canvas, so that they are not only convenient to use, but also prevent damage during operation.
Measurement for rolled curtains
Rolled curtains on plastic windows are characterized by a minimum amount of place occupied by them, so they are quite practical and suitable for installation, even with the minimum number of space.Before measuring the rolled curtains for their installation on the wall, you need to determine the place of the windowsill and take into account the length of the canvas from it to the eaves. To the width of the canvas, it is recommended to add 10 mm to be able to close all possible irregularities.
We recommend to watch the video, how measurements are made under rolled curtains do it yourself.
Measures for rolled curtains are carried out in such a sequence:
- We measure roulette linear dimensions of the window opening. When discharge discovery, select the minimum size.
- The width and height of the outlet coincides with the size of the cloth of the curtains.
- In height, we make adjustment for fastening the control mechanism and design for fastening the housing with a roll. Usually, the additive to the measured value is 20-50 mm.
Conclusion
Conduct measurements blinds for their installation on plastic windows simple enough, the main thing to fulfill all the recommendations and follow the sequence of actions. Until the purchase of a suitable design, all errors in calculations and measurements can be eliminated. Therefore, you should not hurry with measurements, and thoroughly think through every step.